Abstract
Wood specimens of fir (Abies alba Mill) and beech (Fagus sylvatica L.) were chemically modified using polycarboxylic acids (PCA), cured by convection heating or microwave treatment and analyzed by HPLC. A new non-formaldehyde cross-linking system was composed of citric acid (CA) and 1,2,3,4-butanetetracarboxylic acid (BTCA), which are representative polycarboxylic acids (PCAs). These reagents require phosphono-based catalysts, so a sodium hypophosphite (SHP) catalyst was used in this study. The effects of PCA treatment were compared with a previously introduced 1,3-dimethylol 4,5-dihydroxy ethylene urea (DMDHEU) treatment. The dimensional stability of the modified wood was determined in terms of the anti-swelling efficiency (ASE) using the water soak/oven dry method. The results revealed an improvement in ASE for wood modified with PCA compared to modification with DMDHEU. Qualitative and quantitative determinations of bound acids were performed by HPLC. Further intensification of the wood modification process and an increase in the quality of wood-based materials were achieved using microwave treatment. Among other benefits, the formation of cross-links between the wood and the reagent components led to an improvement in the tensile strength retention, particularly in combination with the microwave treatment.
References
Ashaari, Z., Barnes, H.M., Vasishth, R.C., Nicholas, D.D., Lyon, D.E. (1990) Effect of aqueous polymer treatments on wood properties, part 1: Treatability and dimensional stability. IRG-WP Document 90-3610. International Research Group on Wood Protection, Stockholm, Sweden.Search in Google Scholar
Awoyemi, L. (2003) Effect of microwave modification on the shrinkage properties of Eucalyptus obliqua wood. J. Inst. Wood Sci.16:199–203.Search in Google Scholar
Bischof Vukusic, S., Katovic, D., Soljacic, I. (2002) DP finishing with PCA and phosphono-based catalysts. AATCC Rev.2:14–16.Search in Google Scholar
Derbyshire, H., Miller, E.R., Turkulin, H. (1995) Investigation into the photodegradation of wood using microtensile testing. Holz Roh Werkst.53:339–345.10.1007/s001070050103Search in Google Scholar
Hooda, U., Banerjee, S. (2000) Microwave-enhanced transport of chemicals into green wood under low-headspace conditions. Holzforschung54:331–333.10.1515/HF.2000.056Search in Google Scholar
Katovic, D., Bischof Vukusic, S., Stefanic, G. (2000) Investigations of esterification of polycarboxylic acids with cellulose materials. Tekstil49:551–554.Search in Google Scholar
Katovic, D., Trajkovic, J., Bischof Vukusic, S., Sefc, B. (2004) Alternative agents and methods for chemical modification of wood. Drvna Ind.55:175–180.Search in Google Scholar
Metaxas, A.C., Meredith, R.J. (1982) Multimode oven applicators. In: Industrial Microwave Heating, Peter Peregrinus, London. pp. 130–150.Search in Google Scholar
Militz, H. (1993) Treatment of timber with water soluble dimethylol resins to improve their dimensional stability and durability. Wood Sci. Technol.27:347–355.10.1007/BF00192221Search in Google Scholar
Peyer, S.M., Wolcott, M.P., Fenoglio, D.J. (2000) Reducing moisture swell of densified wood with polycarboxylic acid resin. Wood Fiber Sci.32:520–526.Search in Google Scholar
Resch, H. (1968) Microwaves for the drying of wood products. Holz Roh Werkst.26:317–324.10.1007/BF02612806Search in Google Scholar
Rowell, R.M. (1991) Chemical modification of wood. In: Wood and Cellulosic Chemistry. Eds. Hon, D.N., Shiraishi, N. Marcel Dekker Inc., New York. pp. 703–756.Search in Google Scholar
Rowell, R.M., Youngquist, J.A., Montrey, H.M. (1988) Chemical modification: adding value through new FPL composite processing technology. For. Prod. J.38:67–70.Search in Google Scholar
Saito, Y., Nakano, K., Shida, S., Soma, S., Arima, T. (2004) Microwave-enhanced release of formaldehyde from plywood. Holzforschung58:548–551.10.1515/HF.2004.083Search in Google Scholar
Schramm, C., Rinderer, B. (1999a) Influence of additives on the formation of saturated PCA produced during durable-press curing with citric acid. J. Soc. Dyers Colourists115:306–311.10.1111/j.1478-4408.1999.tb00384.xSearch in Google Scholar
Schramm, C., Rinderer, B. (1999b) Optimizing citric acid durable press finishing to minimize fabric yellowing. Textile Chem. Colorist31:23–27.Search in Google Scholar
Schramm, C., Bischof Vukusic, S., Katovic, D. (2002) Non-formaldehyde durable press finishing of dyed fabrics: evaluation of cotton-bound polycarboxylic acids. Color. Technol.118:244–249.10.1111/j.1478-4408.2002.tb00107.xSearch in Google Scholar
Torgovnikov, G.I. (1993) Interactions between the electromagnetic field and wood. In: Dielectric Properties of Wood-based Materials, Springer-Verlag, Berlin. pp. 1–14.Search in Google Scholar
Welch, C.M., Andrews, K.A. (1988) Tetracarboxylic acids as formaldehyde-free durable press finishing agents. Textile Res. J.58:480–486.10.1177/004051758805800809Search in Google Scholar
Xie, Y., Krause, A., Mai, C., Militz, H., Richter, K., Urban, K., Evans, P.D. (2005) Weathering of wood modified with the N-methylol compound 1,3-dymethylol-4,5-dihydroxy-ethyleneurea. Polym. Degrad. Stability89:189–199.10.1016/j.polymdegradstab.2004.08.017Search in Google Scholar
Yang, C.Q. (1991) FT-IR spectroscopy study of the ester cross-linking mechanism of cotton cellulose. Textile Res. J.61:433–440.10.1177/004051759106100801Search in Google Scholar
Yang, C.Q., Wang, X., Kang, I.S. (1997) Ester cross-linking of cotton fabric by polymeric carboxylic acids and citric acid. Textile Res. J.67:334–342.10.1177/004051759706700505Search in Google Scholar
Yang, C.Q., Wei, W., Lickfield, G.C. (2000) Mechanical strength of durable press-finished cotton fabrics. Textile Res. J.70:910–915.10.1177/004051750007001010Search in Google Scholar
Yasuda, R., Minato, K. (1994) Chemical modification of wood by non-formaldehyde cross-linking reagents. Wood Sci. Technol.28:101–110.Search in Google Scholar
©2006 by Walter de Gruyter Berlin New York
