Change language
English Deutsch
Change currency
€ EUR £ GBP $ USD
Licensed Unlicensed Requires Authentication Published by De Gruyter December 1, 2002

Simulation of Contact Interaction of Nanometer Objects Pushing Using AFM Cantilever as Manipulator

  • Xiaopeng Yu, and Andrew A. Goldenberg,
From the journal International Journal of Nonlinear Sciences and Numerical Simulation
https://doi.org/10.1515/IJNSNS.2002.3.3-4.621
Published Online: 2002-12

©2011 by Walter de Gruyter GmbH & Co.

From the journal
International Journal of Nonlinear Sciences and Numerical Simulation
International Journal of Nonlinear Sciences and Numerical Simulation
Volume 3 Issue 3-4

Journal and Issue

Articles in the same Issue

CONTENTS
Endothelial Cells: The Living Sensors and Actuators
Bio-Electrochemical Characterization of Micromachined Two- Electrode Cell Sensors
Micro Flow Cytometers with Buried SU-8/SOG Optical Waveguides for On-line Cell Counting
Enhanceing Antitumor Effect of Adriamycin Nanoparticle - Lipiodol Emulsion by Pretreating Tumor Cells with Diethyldithiocarbamate
Α Model of Directed Binding to Microtubules by Kinesin and Ned Motor Proteins
Micro-systems for Optical Protein-Chip
Design and Fabrication of a Micro Controller Based Glucose Sensor
A Micropipet Aspiration System to Measure the Kinetics of Selectin/Ligand Interactions
Driven by Electroosmotic Flow (EOF) in Poly(dimethylsiloxane) ( PDMS )/Glass Microchip
Fabrication of Microfluidic Electrocontrolled Chip in Polydimethylsiloxane (PDMS)
Development and Characterization of DNA Hybridization Reaction on PDMS Microchip
MEMS-based Temperature Control Systems for DNA Amplification
Design and Microfabrication of Biochemical Reaction Chip
The Construction of Layered Architectures of Dendrimers — Adsorption Layers of Amino-terminated Dendrimers on 3-Mercaptopropionic Acid Self-assembled Monolayer Formed on Au
Perylene Derivative Based Self-Assembled Monolayer on ITO Electrode Surfaces
Analysis of Thermal Cycling in Micro-PCR Chip
Design and CFD Analysis of the Flow in A Micro-Fabricated PCR-Chip for Leukemia Diagnosis
Medical Image Compression Using Tree-Structured Vector Quantization and Fuzzy C-Means
A Two-State Model for the Transport of Molecular Motors
Effective Potential and Efficiency for a Single Brownian Motor
Nanostructure of Nacre and Its Mechanical Effects
An Experimental Investigation of Hollow Fiber Flow in Dialyzer
Design and Rapid Fabrication of a Microfluidic Fraction Collector
A MEMS Flowmeter for Measuring Very Small Flow Rates
Electrostatic MEMS Planar Fan for Enhancement of Fluid Mixing
Preparation of ultra-fine calcium silicate powders
A Circular-Type Thermal Flow Direction Sensor with an Integrated Interface Circuit
Research on a Novel Integrated Pressure Sensor for High Temperature
Fabrication of Thin Film Vanadium Oxide for Microbolometer
An Uncooled Microbolometer Infrared Detector Based on Polycrystalline Silicon Germanium Thin Film
A Micromachined Piezoresistive High-g Accelerometer with High Sensitivity and Wide Frequency-Band: Design and Modeling
Structural Failure Analysis and Numerical Simulation of Microaccelerometers under Impulsive Loading
A Novel Structure of Passive Ring Resonator on Silicon Substrate
Phase and Vibration Analysis for a CMOS-MEMS Gyroscope
A New Z-axis Silicon Micromachined Vibrating Gyroscope
Micro-machined Rate Gyroscope
Simulation of Vibratory Micromachined Gyroscope with Fence Structure
Symmetrica! Design and Analysis of a Novel MEMS-based 1×2 Optical Switch
Simulation, Optimization and Measurement of MEMS Torsion Micro Mirrors for Optical MEMS Application
Optical Alignment Applied for Solving Axis-Misaligned Errors in Micro Electro-Mechanical Systems
Electromechanical Studies on Micro Torsion-Mirror Actuators with Monolithically Integrated Fiber Self-Holding Structures
Failure Modes of Doubly Supported Capacitive RF MEMS Switches
Numerical Simulation of a Bulk Micromachined Relay with Lateral Contact
Failure Mechanisms of a Micro Fabricated Relay
An Analytical Model for High Performance Capacitive RF MEMS Switch Design
Design of A Novel Bulk Micro-machined RF MEMS Switch
Design and Analysis of A Micromachined Capacitive RF Shunt Switch with Composite Membrane
Fabrication and Characterization of Nickel Titanium Shape memory Thin Films by RF Magnetron Sputtering for MEMS Applications
Design and Modeling of a New Thermocouple Structure for Microwave Power Measurements
Design of S-band TT&C Transponder for Pico-Satellites
Comparison Between the System Identification and the Neural Network Methods in Identifying a Model Helicopter's Yaw Movement
System Identification of a Model Helicopter's Yaw Movement Based on an Operator's Control
Micro-machined Conformal Silicon Molds for Wafer Bumping and Probing
Fabrication and Experimental Results of Lateral Trench Electrode IGBT
Micromachined Multilevel Silicon Structure by Anisotropie Wet Etching
Annealing Effect on the Adhesion of Stacked Films for MEMS
Measurement of Adhesive Force between Micro Surfaces with a Novel Micro Leverage Structure
The Fabrcation of Large Area Si3N4 Membrane Mounted with NiCr/Ni Thermocouples
Investigation of Laser-assisted Bonding for MEMS Packaging
Flip Chip Technologies and Their Applications in MEMS Packaging
Image-Based Calibration for Micromanipulators
Effect of Microchannel on Improving the Photoelectro- chemical Performance of Nanostructured TiO2 Electrodes Sensitized by Ru Complex
Surface Finish and Performances of Read/Write Heads by Using Ultra-Fine Diamond Slurry in Polishing Process
Chemical Mechanical Polishing of Computer Hard Disk Substrate in Colloidal SiO2 Slurry
Optical Sensing of Volatile Organic Compounds Using Metalloporphyrins Langmuir-Blodgett Films
Nanotubes of Conducting Polyaniline and Polypyrrole
Molecular Dynamics and Quantum Mechanics Investigation on Mechanic-electric Behaviors of Nanotubes
Fabrication of Nanorollers
POSITIONING TABLES FOR NANOFABRICATION
Lubrication Theory for Thin Film Lubrication Accounting for the Ordered Film Model
Nano-microscale Characterizations to Al2O3/SiCnano Ceramic Composites
Study on Mechanical Properties of Nanocrystal Surface Layer of an Aluminum Alloy
The Effects of Experimental Parameters on the Orientation of AlN Nano Films
Surface Roughness Effect on the Tensile Strength of Micromachined Polysilicon Films
Electrical Field Induced Effect in Nanocrystalline Gold Film during Deposition
Study of Double-Base Thick Film Ceramic Material
Nanometer Scale Interfacial Lubrication of PFPE Lubricants Z-DOL and AWA at Hard Disk Interface
Preparation and Tribological Behavior of Perfluoropolyether Lubricant Film on ZrO2 Thin Film
The Initial Sliding Microfriction Properties of Polysilicon Films
Nano-frictional Behaviors on Etched Silicon (100) Surfaces
Fabricating Nano-structured Surface of Si-based Materials and Their Properties
Effects Analysis on the Mechanical Properties of Nanocrystalline Materials
Depth dependence of nanohardness in a CuAlNi single crystal shape memory alloy
Phase Transformations of Micromachined Polysilicon Films under Nanoindentations
Theoretical Methods for Nanoindentation
Theoretical Study on Effect of the Size of Silver Nanoparticles on the Localized Surface Plasmon Resonance Spectrum of Silver Nanoparticles Embedded in BaO Thin Film
Preparation of Ultra-Fine Calcium Silicate Powders
Preparation of VOP Ultra-fine Particles by Supercritical Fluid Drying
Lyapunov Exponents of a Micro Chaotic Mixer
The Pumping Effect of Traveling Phase Transition in Microtubes
Fiber Ring Laser Intra-cavity Absorption Spectroscopy for Gas Sensing
Discussion about the Similarity of Micro-scale Gas Flows
Proceeding of Experiments about Liquid Flow through Microtubes
Characteristics of the Localized Interface Optical-phonon Modes in Triple-constitution Superlattices with Defect Layers
The Simulation on the Microelectromechanical Tunable F-P Optical Filter
Topology Optimization for Stable Non-linear Structures
Improvement of Micro End Milling Tools through Variation of Tool Manufacturing Method and Geometry
Α Model of Computation of Elastic and Plastic Contact Considering Adhesion Effect
Characterization and Modeling of a Curved Electrostatic Actuator
Method for Reducing Reactive Ion Etching Lag in MEMS Process
Relative Importance of Natural Convection and Surface Radiation in a Square Enclosure
Characterization of Electronic Transients by an Ultrafast Scanning Tunneling Microscope
Simulation of Contact Interaction of Nanometer Objects Pushing Using AFM Cantilever as Manipulator
Optical Module for a Near-Field Hybrid Recording System Using the Diffractive Optical Element (DOE)
M-Test Method for Measuring Mechanical Property of Multi-layer in MEMS
Rotor Manipulation Mechanism for Micro Unmanned Helicopter
Mechanical Model of Laterally Driven Polysilicon Microresonant
Microstructure, Mechanical and Magnetic Properties of FeTiN Thin Films by IBAD
Micromechanical Characterization of TiN Films on 9Cr18 Steels
Deformation Measurement of a Small Component and a Thin Film Using Time Sequence Speckle Pattern Interferometry
Evaluation of Mechanical Properties and Strain Criterion for Realibility Design of Micromachined Polysilicon Thin Films
Properties and Structure of High Coercivity Sm(Co, Al, Si)/Cr Sputtered Thin Films
Reliability of Electrostatic MEMS: Charge Accumulation in Dielectric Layer
Electrical Properties of Multilayer-Chip ZnO Varistors
Electrical Properties of Boron and Phosphorus Doped Polycrystalline Silicon Germanium Films
Study of Fracture Behavior of Piezoelectric Ceramics with Defects
Onset of Adiabatic Shear Instability in Strain Gradient Dependent Metal Matrix Composites
Crack Tip Fields with Strain Gradient Effects
3D Simulation of the Micro Indentation Process and Relative Problems Research
Size Effects in Micro-bending Deformation of MEMS Devices Based on the Discrete Dislocation Theory
Reflection of Magneto-thermoelastic Waves under Thermoelasticity without Energy Dissipation
Morphological Dynamic Simulation of Cluster of Atoms Deposition Process
Atomic Stick-Slip Friction Between Commensurate Self- Assembled Monolayers
Freezing Atom Method in Molecular Dynamics Simulation
The Infrared Absorption's Phonon Model of the Nanometer Powder
The Inner Pressure of the Atoms in a Solid in Refined TFD Theory
Analysis of Residual Stress Gradient in MEMS Multi-layer Structure
Fabrication, Characterization and Property of Aligned Multi – walled Carbon nanotubes
Nanostructuring Based on Scanning Probe Microscopy and Bottom Up Assembly for Future Nanoelectronic Devices
Intrinsic Vibration of Multiwalled Carbon Nanotubes
Paths Linking Micro and Nano Sciences and Technologies
Integrated Micro/Nano Fluidics for Mass-spectrometry Protein Analysis
Autonomous Multi-robot Sensor-Based Cooperation for Nanomedicine
Surface Functionalisation, Orientation, Conformation and Positioning of Macromolecules at the Nanometer Scale
Advances in Quantum Computing and Control
Fabrication and Property Analysis of MWNT Junctions through Nanorobotic Manipulations
Applications of Oriented Batch-CNT
FABRICATION OF SUBMICRO CHANNELS IN QUARTZ CUBES USING LASER-INDUCED SPLITTING
DEPENDENCE OF AC ELECTROPHORESIS CARBON NANOTUBE MANIPULATION ON MICROELECTRODE GEOMETRY
A POLYMER-BASED MICRO THERMAL ACTUATOR FOR MICROMANIPULATIONS IN AQUEOUS ENVIRONMENT
Simulation of Thin Metal Film Bonding for MEMS Applications Inside a Microwave Cavity
Morphology Correlation to the Superhydrophobicity in an Organic Thin Film on Rough Al
Fabrication of an Electrothermally Actuated Electrostatic Microgripper
Downloaded on 14.5.2024 from https://www.degruyter.com/document/doi/10.1515/IJNSNS.2002.3.3-4.621/html
Scroll to top button