Skip to content
Licensed Unlicensed Requires Authentication Published by De Gruyter June 19, 2013

Dissolution/reprecipitation technique for waste polyolefin recycling using new pure and blend organic solvents

  • Arkan J. Hadi EMAIL logo , Ghazi Faisal Najmuldeen and Kamal Bin Yusoh

Abstract

Restoration of waste polymer based on low-density polyethylene (LDPE), high-density polyethylene (HDPE) and polypropylene (PP) is studied using the dissolution/reprecipitation method. In this technique, pure turpentine, turpentine/petroleum ether (PetE) and turpentine/benzene as solvents with different fractions and PetE and n-hexane as non-solvents were examined. Commercial polymer products (packaging food, bags, laboratory plastic materials, detergent containers) used as raw materials were optimized with model polymers. Polymer recoveries in every case were <94%. Fourier transform infrared (FTIR) spectra and tensile mechanical properties of the samples before and after recycling were measured. Potential recycling-based degradation of the polymer was further investigated by measuring the thermal properties (melting point and crystallinity), before and after recycling, using differential scanning calorimetry (DSC). The blend solvents were seen as good solvents for all polyolefins used and the dissolution temperature was less than the pure solvent at the same time. High reconditioning was observed in most recycled samples, with no significant difference from the virgin materials. The studied technique seems to be viable for waste polyolefin polymer recycling.


Corresponding author: Arkan J. Hadi, Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang, Lebuhraya Tun Razak, 26300 Gambang, Kuantan, Pahang, Malaysia; and Department of Chemical Engineering, College of Engineering, University of Tikrit, Tikrit, Salahaldden, Iraq

The authors acknowledge the support provided by Dr. Kamal Bin Yusoh and the Faculty of Chemical Engineering and Natural Resource (FKKSA), University Malaysia Pahang, for this work.

References

[1] MPMA. Malaysian Plastics Manufacturers Association. 2005.Search in Google Scholar

[2] Williamson. Recycling of Polymers. Personal communication Shrewsbury. Plastics Consultancy Network. http://www.pcn.org. 1995.Search in Google Scholar

[3] Voûte. “Why recycle,” In Proc. Recycling Council Annual SeminarBirmingham, UK, 17 February 1994. Taylor & Francis, 1994.Search in Google Scholar

[4] Hamilton JD, Reinert KH, Hagan JV, Lord WV. J. Air Waste Manage. Assoc. 1995, 45, 247–251.Search in Google Scholar

[5] Achilias DS, Giannoulis A, Papageorgiou GZ. Polym. Bull. 2009, 63, 449–465.Search in Google Scholar

[6] Nauman EB, Lynch JC. US Patent 5,198,471, 1993.Search in Google Scholar

[7] Nauman EB, Lynch JC. US Patent 5,278,282, 1994.Search in Google Scholar

[8] Papaspyrides CD, Poulaki JG, Varelides PC. Resour. Conserv. Recycl. 1994, 12, 177–184.Search in Google Scholar

[9] Poulakis JG, Papaspyrides CD. Adv. Polym. Technol. 1995, 14, 237–242.Search in Google Scholar

[10] Poulakis JG, Papaspyrides CD. Resour. Conserv. Recycl. 1997, 20, 31–41.Search in Google Scholar

[11] Pappa G, Boukouvalas C, Giannaris C, Ntaras N, Zografos V, Magoulas K, Lygeros A. Resour. Conserv. Recycl. 2001, 34, 33–44.Search in Google Scholar

[12] Hadi AJ, Najmuldeen GF, Ahmed I. APCBEE Procedia 2012, 3, 281–286.10.1016/j.apcbee.2012.06.083Search in Google Scholar

[13] Hadi AJ, Najmuldeen GF, Ahmed I. J. Purity, Util. React. Environ. 2012, 1, 373–383.Search in Google Scholar

[14] Hadi AJ, Najmuldeen GF, Ahmed I. J. Polym. Eng. 2012, 32, 585–591.Search in Google Scholar

[15] Hadi AJ, Najmuldeen GF, Kamal Y. Energy Educ. Sci. Technol., Part A 2013, 30, 989–1004.Search in Google Scholar

[16] Bloch D. Polymer Handbook, John Wiley and Sons: New York, 1999.Search in Google Scholar

[17] Hansen CM. Hansen Solubility Parameters: A User’s Handbook.CRC: US, 2007.10.1201/9781420006834Search in Google Scholar

[18] Sanchez IC, Robert HL. Macromolecules 1978, 11, 145–1156.10.1021/ma60066a017Search in Google Scholar

[19] Blanks RF, Prausnitz JM. Ind. Eng. Chem. Fundam. 1964, 3, 1–8.Search in Google Scholar

[20] Hildebrand JH. The Solubility of Non-Electrolytes, Reinhold: New York, 1936.Search in Google Scholar

[21] Hildebrand JH, Scott LR. The Solubility of Nonelectrolytes. Dover Publications: New York, 1964.Search in Google Scholar

[22] Hildebrand JH, Prausnitz JM, Scott RL. Regular and Related Solutions: The Solubility of Gases, Liquids, and Solids. Van Nostrand Reinhold: New York, 1970.Search in Google Scholar

[23] Feller RL. Conservation and Restoration of Pictorial Art. Butterworths: London, 1976, 158–161.Search in Google Scholar

[24] Koenhen DM, Smolders CA. J. Appl. Polym. Sci. 1975, 19, 1163–1179.Search in Google Scholar

[25] TN 48. Polymer Heats of Fusion. TA Instruments: New Castle, DE, 1990.Search in Google Scholar

[26] Wunderlich B. Thermal Analysis, Academic Press: Boston, 1990; pp. 417–431.10.1016/B978-0-12-765605-2.50008-XSearch in Google Scholar

Received: 2013-2-5
Accepted: 2013-5-16
Published Online: 2013-06-19
Published in Print: 2013-08-01

©2013 by Walter de Gruyter Berlin Boston

Downloaded on 21.5.2024 from https://www.degruyter.com/document/doi/10.1515/polyeng-2013-0027/html
Scroll to top button