Abstract
This paper describes a study of the effect of partial replacement of ordinary Portland cement (OPC) by various mineral additives in the screed mixtures. Ceramic powder, blast furnace slag and fly ash were gradually employed in increments of 12.5 wt.% up to 50 wt.% to replace OPC. The mixtures were designed to a constant consistency. The influence of mineral additives was evaluated in terms of the air content in the fresh mixtures, the compressive strength, the flexural strength and the freeze-thaw resistance and using non-destructive measurements after 28 and 90 days. The accompanied paste sampleswere analysed using thermogravimetry to monitor the hydration process by means of total bound water content. The decrease in the mechanical properties and the frost resistance of the mixtures with the mineral additives were recorded, because of the necessity for a larger addition of water. According to the valid standards for concrete screed related to the frost resistance, it could be concluded that maximal suitable cement replacement contents are 12.5, 37.5 and 50 wt.% for ceramic powder, fly ash and blast furnace slag, respectively. The freeze-thaw resistance of the studied materials was found to be strongly related to the content of CSH and CAH hydrates.
References
[1] C. Meyer, Cement and Concrete Composites, 31 (2009) 601–605.Search in Google Scholar
[2] M. Uysal, K. Yilmaz, and M. Ipek, Construction and Building Materials, 27 (2012) 263–27010.1016/j.conbuildmat.2011.07.049Search in Google Scholar
[3] M. Keppert, M. Urbanová, J. Brus, M. Čáchová, J. Fořt, A. Trník, et al., Construction and Building Materials,148 (2017) 411–418.Search in Google Scholar
[4] K. De Weerdt, K.O. Kjellsen, E. Sellevold, and H. Justnes, Cement and Concrete Composites,33 (2011) 30–38.10.1016/j.cemconcomp.2010.09.006Search in Google Scholar
[5] H. Yazıcı, Construction and Building Materials, 22 (2008) 456–462.10.1016/j.conbuildmat.2007.01.002Search in Google Scholar
[6] D. Wang, X. Zhou, Y. Meng, and Z. Chen, Construction and Building Materials, 147 (2017) 398–406.Search in Google Scholar
[7] C.-W. Chung, C.-S. Shon, and Y.-S. Kim, Construction and Building Materials, 24 (2010) 1739–1745.10.1016/j.conbuildmat.2010.02.015Search in Google Scholar
[8] E. Özbay, M. Erdemir, and H.İ. Durmuş, Construction and Building Materials,105 (2016) 423–434.Search in Google Scholar
[9] Z. Giergiczny, M.A. Glinicki, M. Sokołowski, and M. Zielinski, Construction and Building Materials, 23 (2009) 2451–2456.10.1016/j.conbuildmat.2008.10.001Search in Google Scholar
[10] J. Deja, Cement and Concrete Composites, 25 (2003) 357–361.Search in Google Scholar
[11] G.J. Osborne, Cement and Concrete Composites, 21 (1999) 11–21.10.1016/S0958-9465(98)00032-8Search in Google Scholar
[12] M. Drdácký, F. Fratini, D. Frankeová, and Z. Slížková, Construction and Building Materials, 38 (2013) 1117–1128.10.1016/j.conbuildmat.2012.09.044Search in Google Scholar
[13] G. Baronio and L. Binda, Construction and Building Materials, 11 (1997) 41–46.10.1016/S0950-0618(96)00032-3Search in Google Scholar
[14] Z. Pavlík, A. Trník, T. Kulovaná, L. Scheinherrová, V. Rahhal, E. Irassar, et al., International Journal of Thermophysics, 37 (2016).10.1007/s10765-016-2043-3Search in Google Scholar
[15] F. Pacheco-Torgal and S. Jalali, Construction and Building Materials, 24 (2010) 832–838.Search in Google Scholar
[16] E. Navrátilová and P. Rovnaníková, Construction and Building Materials, 120 (2016) 530–539.Search in Google Scholar
[17] B. Ercikdi, G. Külekci, T. Yılmaz, Construction and Building Materials, 93 (2015) 573–583.Search in Google Scholar
[18] D.M. Kannan, S.H. Aboubakr, A.S. EL-Dieb, and M.M. Reda Taha, Construction and Building Materials, 144 (2017) 35–41.Search in Google Scholar
[19] M.A. Glinicki, R. Jaskulski, and M. Dabrowski, Roads and Bridges - Drogi I Mosty, (2016) 21–43.10.21005/pif.2016.27.B-02Search in Google Scholar
[20] CSN 73 1325: Determination of frost resistance of concrete using accelerated tests, Czech Republic (1972).Search in Google Scholar
[21] R. Černý and P. Rovnaniková, Transport Processes in Concrete, Spon Press, London, (2002).10.1201/9781482289107Search in Google Scholar
[22] P. A. Claisse, Transport Properties of Concrete, Woodhead Publishing, Cambridge, (2014).Search in Google Scholar
[23] T.C. Powers, The air requirement of frost-resistant concrete, Highway Research Board Proceedings 184 (1949).Search in Google Scholar
[24] K.A. Jackson and B. Chalmers, Journal of Applied Physics, 29 (1958) 1178–1181.10.1063/1.1723397Search in Google Scholar
[25] Z. Sun and G.W. Scherer, Cement and Concrete Research,40 (2010) 260–270.10.1016/j.cemconres.2009.09.027Search in Google Scholar
[26] L. Liu, D. Shen, H. Chen, W. Sun, Z. Qian, H. Zhao, et al., Cement and Concrete Composites, 53 (2014) 1–9.Search in Google Scholar
[27] Z. P. Bazant, J. C. Chern, A. M. Rosenberg, and J. M. Gaidis, Journal of the American Ceramic Society, 71 (1988) 776–783.Search in Google Scholar
[28] O. Coussy and P.J.M. Monteiro, Cement and Concrete Research, 38 (2008) 40–48.10.1016/j.cemconres.2007.06.006Search in Google Scholar
[29] L. Liu, S. Wu, H. Chen, and Z. Haitao, Cold Regions Science and Technology, 106–107 (2014) 141–152.Search in Google Scholar
[30] M.J. Setzer, Journal of Colloid and Interface Science,235 (2001) 170–182.Search in Google Scholar
[31] J. Zhou and D. Li, Cold Regions Science and Technology, 72 (2012) 43–49.10.1016/j.coldregions.2011.11.006Search in Google Scholar
[32] M.J. Setzer and R. Auberg,Damages caused by freeze-thawcycles with de-icing salt Topical results - Recommendations for practice, Concrete Precasting Plant and Technology, 72 (2006) 96-97.Search in Google Scholar
[33] M. Balapour, A. Joshaghani, and F. Althoey, Construction and Building Materials,181 (2018) 27–41.Search in Google Scholar
[34] K. Behfarnia and N. Salemi, Construction and Building Materials, 48 (2013) 580–584.10.1016/j.conbuildmat.2013.07.088Search in Google Scholar
[35] P. Reiterman, European Journal of Environmental and Civil Engineering, (2018) 1–14.Search in Google Scholar
[36] E. Özbay, O. Karahan, M. Lachemi, K.M.A. Hossain, and C.D. Atis, Composites Part B: Engineering,45 (2013) 1384–1390.10.1016/j.compositesb.2012.07.038Search in Google Scholar
[37] CSN EN 1015-3: Methods of test for mortars for masonry - Determination of consistence of fresh mortar (by flow table), Czech Republic (2000).Search in Google Scholar
[38] CSN EN 12350-7: Testing fresh concrete – Part 7: Air content - Pressure methods, Czech Republic (2009).Search in Google Scholar
[39] CSN 731322 – Determination of frost resistance of concrete, Czech Republic (2003).Search in Google Scholar
[40] M. Hora and P. Reiterman, Revista Romana de Materiale, 46 (2016) 327.Search in Google Scholar
[41] CSN 73 1371: Testing of hardened concrete – Determination of ultrasonic pulse velocity, Czech Republic (2005).Search in Google Scholar
[42] K. De Weerdt, M.B. Haha, G. Le Saout, K.O. Kjellsen, H. Justnes, and B. Lothenbach, Cement and Concrete Research, 41 (2011) 279–291.10.1016/j.cemconres.2010.11.014Search in Google Scholar
[43] V. Bílek, P.Mec, L. Zidek, and T. Moravec, Cement Wapno Beton, 2015 (2015) 72-78.Search in Google Scholar
[44] K. Polozhiy, J.A. Siddique, and P. Reiterman, Materials Science Forum, 824 (2015) 61–64.Search in Google Scholar
[45] M. Sahmaran, G. Yildirim, and T.K. Erdem, Cement and Concrete Composites, 35 (2013) 89–101.10.1016/j.cemconcomp.2012.08.013Search in Google Scholar
[46] L. Soriano, J. Monzó, M. Bonilla, M.M. Tashima, J. Payá, and M.V. Borrachero, Cement and Concrete Composites, 42 (2013) 41–48.10.1016/j.cemconcomp.2013.05.007Search in Google Scholar
[47] P. Zhang, F.H. Wittmann, M. Vogel, H.S. Müller, and T. Zhao, Cement and Concrete Research, 100 (2017) 60–67.10.1016/j.cemconres.2017.05.018Search in Google Scholar
[48] G.-F. Peng, Q. Ma, H.-M. Hu, R. Gao, Q.-F. Yao, and Y.-F. Liu, Construction and Building Materials, 21 (2007) 1034–1039.10.1016/j.conbuildmat.2006.02.002Search in Google Scholar
[49] G.W. Scherer, Cement and Concrete Research,29 (1999) 1347–1358.Search in Google Scholar
© 2019 Pavel Reiterman et al., published by De Gruyter Open
This work is licensed under the Creative Commons Attribution 4.0 Public License.
