Abstract
Substrate curvature and submicron indentation measurements have been used recently to study plastic deformation in thin films on substrates. In the present work both of these techniques have been employed to study the strength of aluminum and tungsten thin films on silicon substrates. In the case of aluminum films on silicon substrates, the film strength is found to increase with decreasing thickness. Grain size variations with film thickness do not account for the variations in strength. Wafer curvature measurements give strengths higher than those predicted from hardness measurements suggesting the substrate plays a role in strengthening the film. The observed strengthening effect with decreased thickness may be due to image forces on dislocations in the film due to the elastically stiffer silicon substrate. For sputtered tungsten films, where the substrate is less stiff than the film, the film strength decreases with decreasing film thickness.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
A. K. Sinha, H. J. Levinstein, and T. E. Smith, J. Appl. Phys. 49, 2423 (1978).
A. K. Sinha and T. T. Sheng, Thin Solid Films 48, 117 (1978).
P. H. Townsend and H. A. Vanderplas, Mater. Res. Soc. Proc. 47, 121 (1985).
M. Hershkovitz, I. A. Blech, and Y. Komem, Thin Solid Films 130, 87 (1985).
H. Hieber and T. Simon, Proceedings of the International Reliability Physics Symposium, IEEE Electron Devices and Reliability Societies, 1986, p. 253.
C. K. Hu, D. Gupta, and P. S. Ho, Proceedings of the 2nd International IEEE VLSI Multilevel Interconnect Conference, 1985, p. 187.
H. M. Pollock, D. Maugis, and M. Barquins in Microindentation Techniques in Materials Science and Engineering, edited by P.J. Blau and B. R. Lawn (American Society for Testing and Materials, Philadelphia, PA, 1985), p. 47.
A. G. Dirks, J. J. Van den Broek, and P. E. Wierenga, J. Appl. Phys. 55, 4248 (1984).
D. Stone, W. La Fontaine, S. Ruoff, and C. Y. Li, Mater. Res. Soc. Proc. 72, 43 (1986).
M. F. Doerner and W. D. Nix, J. Mater. Res. 1, 601 (1986).
J. Pethica, R. Hutchings, and W. C. Oliver, Philos. Mag A. 48, 593 (1983).
E. J. Mclnerney and P. A. Flinn, International Reliability Physics Symposium, IEEE Electron Devices and Reliability Societies, 1982, p. 264.
D. Lebouvier, P. Gilormini, and E. Felder, J. Phys. D 18, 199 (1985).
J. C. Bravman (private communication).
J. A. Thornton, J. Tabock, and D. W. Hoffman, Thin Solid Films 64, 111 (1979).
D. Tabor, The Hardness of Metals (Clarendon, Oxford, 1951).
T. R. Simes, S. G. Mellor, and D. A. Hills, J. Strain Anal. 19, 135 (1984).
N. Hansen, Acta Metall. 25, 863 (1977).
R. W. Armstrong in Advances in Materials Research, edited by H. Herman (Interscience, New York, 1970), Vol. 4.
M. Ronay and C. F. Aliotta, Philos. Mag. A 42, 161 (1980).
P. Chaudhari, J. Appl. Phys. 45, 4339 (1974).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Doerner, M.F., Gardner, D.S. & Nix, W.D. Plastic properties of thin films on substrates as measured by submicron indentation hardness and substrate curvature techniques. Journal of Materials Research 1, 845–851 (1986). https://doi.org/10.1557/JMR.1986.0845
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1986.0845