Abstract
Void formation in tensile test under hydrostatic pressure is characterized through quantitative metallography, and the fracture mechanism under pressure is analyzed by fractography. Transition of the fracture surface from the cup-and-cone under atmospheric pressure to a slant structure under high pressure is explained on the basis of the void development leading to fracture and the concomitant change in fracture mechanism. The concept of “shear blocks” is introduced to illustrate the features observed on the fracture surface of specimens tested under high pressure. It is postulated that shear blocks evolve to connect the central crack regions with the shear crack initiated on neck surface due to the severe necking deformation under applied pressure.
Similar content being viewed by others
References
W. A. Spitzig, Acta Metall. 27, 523 (1979).
W. A. Spitzig, R. J. Sober, and O. Richmond, Metall. Trans. A 7A, 1703 (1976).
A. Brownrigg, W. A. Spitzig, O. Richmond, D. Teirlinck, and J. D. Embury, Acta Metall. 31, 1141 (1983).
A. S. Argon and J. Im, Metall. Trans. A 6A, 839 (1975).
A. S. Argon, J. Im, and A. Needleman, Metall. Trans. A 6A, 815 (1975).
G. LeRoy, J. D. Embury, G. Edward, and M. F. Ashby, Acta Metall. 29, 1509 (1981).
H. C. Rogers, Acta Metall. 7, 7507 (1959).
A. S. Argon and F. A. McClintock, Mechanical Behavior of Materials (Addison Wesley Publ., 1966), p. 309.
P. W. Bridgman, Studies in Large Plastic Flow and Fracture (Harvard University Press, 1964), p. 38.
I. E. French and P. F. Weinrich, Scripta Metall. 8, 87 (1974).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Kao, A.S., Kuhn, H.A., Richmond, O. et al. Tensile fracture and fractographic analysis of 1045 spheroidized steel under hydrostatic pressure. Journal of Materials Research 5, 83–91 (1990). https://doi.org/10.1557/JMR.1990.0089
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1990.0089