Abstract
A thorough investigation of the microstructure of single SCS-6 SiC fibers widely used as reinforcements in metal-matrix and ceramic-matrix composites has been made. Various techniques of electron microscopy (EM) including scanning (SEM), conventional transmission (TEM), high resolution (HREM), parallel electron energy loss spectroscopy (PEELS), and scanning Auger microscopy (SAM) have been used to analyze and characterize the microstructure. The fiber is a complicated composite consisting of many different layers of SiC deposited on a carbon core and different carbonaceous coatings covering the SiC layers. The structural and chemical aspects of each layer are characterized and discussed.
Similar content being viewed by others
References
D.B. Marshall, in Ceramic Microstructures ‘86: Role of Interfaces, edited by J. A. Pask and A. G. Evans (Plenum Press, New York, 1986), pp. 859–868.
J. A. DiCarlo, J. Metals 37, 44 (1985).
T-I. Mah, M. G. Mendiratta, A. P. Katz, and K. S. Mazdiyasni, Ceram. Bull. 66, 304 (1987).
P. Pirouz, G. Morscher, and J. Chung, in NATO Advanced Study Institute on Surfaces and Interfaces of Ceramic Materials, edited by L-C. Dufour, C. Monty, and G. Petot-Ervas (Kluwers Academic Publishers, 1989), pp. 737–760.
R.N. Singh, J. Am. Ceram. Soc. 72, 1764 (1989).
J. V. Marzik, in Processing of the Metal and Ceramic Composite Processing Conference, MCMC-1, Metals and Ceramics Information Center, Battelle Laboratories, Columbus, OH, November 1984.
J. A. McElman, in Engineering Materials Handbook: Composites (ASM INTERNATIONAL, 1987), Vol. 1, pp. 858–866.
F.E. Wawner, A.T. Teng, and S.R. Nutt, SAMPE Quarterly 14, 39 (1983).
S. R. Nutt and F. E. Wawner, J. Mater. Sci. 20, 1953 (1985).
M. Lancin, J. Thibault-Desseaux, and J. S. Bour, J. Microsc. Spectrosc. Electron. 13, 503 (1988).
M. Lancin, J. S. Bour, and J. Thibault-Desseaux, in High-Temperature/High-Performance Composites, edited by F. D. Lemkey, A. G. Evans, S. G. Fishman, and J. R. Strife (Mater. Res. Soc. Symp. Proc. 120, Pittsburgh, PA, 1988), p. 351.
M. Lancin, J. S. Bour, J. Thibault-Desseaux, and N. Valignat, in Metal-Ceramic Interfaces, edited by M. Riihle, A. G. Evans, M. F. Ashby, and J. P. Hirth (Pergamon Press, 1990), pp. 121–128.
J. Chung, M. Sc. Thesis, Case Western Reserve University, Cleveland, OH (1990).
R. T. Bhatt, NASA Technical Memorandum 87085, NASA Lewis Research Center, Cleveland, OH (1985).
X.J. Ning, P. Pirouz, K.P.D. Lagerlof, and J. DiCarlo, J. Mater. Res. 5, 2865 (1990).
A. Oberlin, in Chemistry and Physics of Carbon, edited by P. A. Thrower (Marcel Dekker, New York, 1989), Vol. 22.
A. Oberlin, J. Goma, and J. N. Rouzaud, J. Chim. Phys. 81, 701 (1984).
B.E. Warren, Phys. Rev. 59, 693 (1941).
R. E. Franklin, Acta Cryst. 3, 107 (1950).
R.E. Franklin, Acta Cryst. 4, 253 (1951).
J. Mering and J. Maire, in Les Carbones, ed. Group Francaise d’Etudes des Carbones (Masson, Paris, 1965), Vol. 1, p. 129.
G.E. Bacon, Acta Cryst. 4, 558 (1951).
B.A. Lerch, D.R. Hull, and T.A. Leonhardt, NASA Report TM-100938 (1988).
J.I. Eldridge and F.S. Honecy, Proc. 36th National Symposium of the AVS, Boston, MA (1989).
G. Morscher, P. Pirouz, and A. H. Heuer, J. Am. Ceram. Soc. 73, 713 (1990).
X. J. Ning and P. Pirouz, unpublished work (1991).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Ning, X.J., Pirouz, P. The microstructure of SCS-6 SiC fiber. Journal of Materials Research 6, 2234–2248 (1991). https://doi.org/10.1557/JMR.1991.2234
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.1991.2234