Abstract
A two-parameter “area function” characterizing the depth-dependent projected area of an indenter was introduced and applied to a Berkovich tip. The two parameters have physical meaning, corresponding to the effective tip radius and effective cone angle. The indenter tip was calibrated on a commercial load-controlled Nano Indentert® XP (MTS Systems Corp., Eden Prairie, MN). All calibrations were carried out using the procedure of Oliver and Pharr [J. Mater. Res. 7, 1564 (1992)] using several homogeneous materials. Plane-strain modulus and hardness values deconvoluted from indentation load–displacement traces using the calibrated two-parameter area function compared well with the values determined using the empirical eight-parameter area function of Oliver and Pharr.
Similar content being viewed by others
References
W.C. Oliver and G.M. Pharr, J. Mater. Res. 7, 1564 (1992).
S. Enders, P. Grau, and H.M. Hawthorne, in Fundamentals of Nanoindentation and Nanotribology II, edited by S.P. Baker, R.F. Cook, S.G. Corcoran, and N.R. Moody (Mater. Res. Soc. Symp. Proc. 649, Warrendale, PA, 2000), p. Q3.6.
M.F. Doerner and W.D. Nix, J. Mater. Res. 1, 601 (1986).
K. Herrmann, N.M. Jennett, W. Wegener, J. Meneve, K. Hasche, and R. Seemann, Thin Solid Films 377–378, 394 (2000).
G.M. Pharr, W.C. Oliver, and D.R. Clarke, J. Elect. Mater. 19, 881 (1990).
G.M. Pharr, W.C. Oliver, and D.S. Harding, J. Mater. Res. 6, 1129 (1991).
V. Domnich, Y. Gogotsi, and S. Dub, Appl. Phys. Lett. 76, 2214 (2000).
L. Riester, R.J. Bridge, and K. Breder, in Fundamentals of Nanoindentation and Nanotribology, edited by N.R. Moody, W.W. Gerberich, S.P. Baker, and N. Burnham (Mater. Res. Soc. Symp. Proc. 522, Pittsburgh, PA 1998), p. 45.
A. Bolshakov and G.M. Pharr, J. Mater. Res. 13, 1049 (1998).
Y.Y. Lim and M.M. Chaudhri, Philos. Mag. A 79, 2979 (1999).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Thurn, J., Cook, R.F. Simplified Area Function for Sharp Indenter Tips in Depth-sensing Indentation. Journal of Materials Research 17, 1143–1146 (2002). https://doi.org/10.1557/JMR.2002.0169
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2002.0169