Abstract
The interfacial zone between cement paste and embedded steel is a porous one, to which the rust can easily diffuse and where it can be deposited. Strengthening the zone makes the passive oxide film more complete, and harder to rupture; the rate of corrosion decreases, the initiation stage of pitting corrosion is delayed, the effect of self–catalysis is weakened, and the acceleration of corrosion is greatly decreased. Therefore, a strengthened interfacial zone can improve the anti–corrosion properties greatly, with less cost than other methods of inhibiting corrosion.
Similar content being viewed by others
References
D.J. Pinchin and D. Tabor, Cem. Conc. Res., 8, 15–24 (1978).
D.J. Pinchin and D. Tabor, Fibre Reinforced Cem. and Conc. 2, 521–526 RILEM Symposium, (1975).
M.N. Al–Khalaf and C.L. Page, Cem. Conc. Res. 8, 481–490, (1978).
Chen Zhi Yuan and Zhang Xio Zhong: “The Structure of the Interfacial Zone Between Copper, Iron and Cement Paste and Its Modification” (1985 unpublished).
M. Stern and A.L. Gearg J. Electrochem. Soc. 104, 56 (1957).
J.A. Gonzalez and C. Andrde, Br. Corros. J. 17, 23–28 (1982).
Tian Zhao Wu, in “Research Methods for Electrochemistry”, China Scientific Publishers (1984) (in Chinese).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yuan, C.Z., Zhi, W.N. The Effect of the Cement Paste–Steel Interfacial Zone on the Electrochemical Properties of Reinforcing Rods. MRS Online Proceedings Library 114, 277 (1987). https://doi.org/10.1557/PROC-114-277
Published:
DOI: https://doi.org/10.1557/PROC-114-277