Abstract
To implement new process control strategies including Intelligent Processing of Materials, advanced sensors are required to nonintrusively evaluate process and microstructure variables. Researchers increasingly are looking to innovative extensions of traditional nondestructive evaluation technologies, such as ultrasonics, acoustic emission, and eddy current methodologies for this. Here, the nature and characteristics of emerging sensors based upon these new measurement methods are described and examples of their application discussed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
H.N.G. Wadley, J. Metals, 38(10), (1986), pp. 49–53.
F. Förster, In Nondestructive Testing Handbook. Vol. 4, Electromagnetic Testing, edited by R. C. McMaster, P. McIntyre, and M. L. Mester (American Society for Nondestructive Testing, Columbus, Ohio, 1986) pp. 89–110.
H. L. Libby, Introduction to Electromagnetic Nondestructive Test Methods, (John Wiley and Sons, Inc., New York, 1971) pp. 135–150.
A. H. Kahn and R. Spal, in Eddy Current Characterization of Materials and Structures, edited by G. Birnbaum and G. Free (American Society for Testing and Materials, 1981) pp. 298–307.
H.N.G. Wadley, A. H. Kahn, Y. Gefen and M. Mester, in Review of Progress in Quantitative NDE, Vol. 7, (Eds) D. O. Thompson and D. E. Chimenti, Plenum Press (New York). In Press, 1988.
A.H. Kahn and M. Mester, in Review of Progress in Quantitative NDE, Vol. 7 (Eds) D. O. Thompson and D. E. Chimenti, Plenum Press (New York), 1988. In Press.
M. L. Mester, in Nondestructive Testing Handbook, Vol. 4, Electromagnetic Testing, edited by R. C. McMaster, P. McIntyre and M. L. Mester, (American Society for Nondestructive Testing, Columbus, Ohio, 1986) Sec. 13.
F. Förster and H. L. Libby, in Nondestructive Testing Handbook, Vol. 4, Electromagnetic Testing, edited by R. C. McMaster, P. McIntyre and M. L. Mester, (American Society for Nondestructive Testing, Columbus, Ohio, 1986) Sec. 13.
C. V. Dodd and W. E. Deeds, J. Appl. Phys. 39 (1968), Sec. 4, p. 2829.
K. E. Graff, Wave Motion in Elastic Solids, (Ohio State University Press, 1975) Ch. 5.
B. A. Auld, Acoustic Fields and Waves in Solids, (John Wiley and Sons, New York, 1973) pp. 163–190.
H.N.G. Wadley, J. Norton, F. Mauer, and B. Droney, Phil. Trans. R. Soc. London A, 320 (1986) pp. 341–361.
M. Rosen, H. N. G. Wadley, and R. Mehrabian, Scripta Met. 15 (1981), pp. 1231–1236.
H. M. Ledbetter, Met. Trans. A, 11A (1980) pp. 543–544.
R. L. Parker, J. R. Manning and N. C. Peterson, J. Appl. Phys. 58 (1985) pp. 4150–4164.
K. Aki and P. G. Richards, Quantitative Seismology: Theory and Methods (W. H. Freeman, San Francisco, 1980) pp. 123–192.
H. P. Liu, D. L. Anderson and H. Kanamori, Geophys. J. Roy. Astron. Soc., 47 (1976) pp. 41–58.
C. C. Smith (Ed), Internal Friction and Ultrasonic Attenuation in Solids, Pergamon Press (Oxford) 1980.
R. A. Toupin and B. Bernstein, J. Acoust. Soc. Am. 33 (1961), pp. 216–225.
R. N. Thurston and K. Brugger, Phys. Rev. A133 (1964) pp. 1604–1610.
C.M. Sayers, in Solid Mechanics Research for Quantitative Nondestructive Evaluation, edited by J. D. Achenback and Y. Rajapakse, Martinus Nijhoff Publishers, 1987, pp. 319–333.
M. J. P. Musgrave, Crystal Acoustics: Introduction to the Study of Elastic Waves and Vibrations in Crystals (Holden-Day, San Francisco, 1970) pp. 83–93.
F. E. Stanke, in NDE of Microstructure for Process Control, edited by H. N. G. Wadley (American Society for Metals, Metals Park, Ohio 1984) pp. 55–60.
F. E. Stanke and G. Kino, J. Acoust. Soc. Am. 75, (1984) pp. 665–681.
A. Randak, in On-Line Inspection of Steel Products (International Iron and Steel Institute, Brussels, 1983).
A. V. Clark, A. Govada, R. B. Thompson, J. C. Smith, G. V. Blessing, P. P. Delsanto, and R. B. Bignogna, in Review of Progress in Quantitiative Nondestructive Evaluation 6B, edited by D. O. Thompson and D. E. Chimenti (Plenum Press, New York 1986) pp. 1515–1524.
C. M. Sayers, J. Phys. D: Appl. Phys. 15 (1982) pp. 2157–2167.
C.M. Sayers in Solid Mechanics Research for Quantitative Non-Destructive Evaluation (Eds) J. D. Achenbach and Y. Rajapakse, Martinus Nijhoff Publishers (1987) pp. 319–333.
C B. Scruby, H.N.G. Wadley and J. E. Sinclair, Phil. Mag., A44, (1981) pp. 249–274.
J. A. Simmons and R. B. Clough in Dislocation Modelling of Physical Systems (Eds) M. F. Ashby, R. Bullough, C S. Hartley and J. P. Hirth, (Pergamon Press, New York, 1981) pp. 464–497.
H.N.G. Wadley and J. A. Simmons in Nondestructive Handbook, Vol. 5, Acoustic Emission Testing, Edited by R. K. Miller and P. McIntire (American Society for Nondestructive Testing, Columbus, Ohio, 1987) pp. 64–90.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Wadley, H.N.G., Kahn, A.H. & Johnson, W. Advanced Sensing of Materials Processing. MRS Online Proceedings Library 117, 109–118 (1988). https://doi.org/10.1557/PROC-117-109
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-117-109