초록

In this study, we have developed an automatic manufacturing system for functional wood plastic composites(with iron band + embossing + water leaking hole) which are one of spotlighting materials for landscape architecture and residential construction material. In addition to the leading research facilities, this manufacturing system is consist of an automatic vertical pattern embossing device, multi-spindle drill M/C, sanding device, inspection equipment, etc. We have performed the performance tests for the system such as the specific gravity, bending strength, screw holding power, percentage of moisture content, formaldehyde, skid resistance, absorption thickness expansion rate, cold resistance(appearance & bending strength), and shock resistance. As a result, the performance of the prototype system satisfies all the objects of this study with the exception of the skid resistance, absorption thickness expansion rate.

키워드

Wood Plastic Composites(합성목재), Vertical Pattern Embossing Device(세로무 늬 엠보싱장치), Water Leaking Hole(물 빠짐 홀), Multi-spindle Drill M/C(다축 드릴머신), Sanding Device(표면처리장치), Inspection Equipment(검사장치)

참고문헌(9)open

  1. [보고서] B. S. Kim / 2012 / Development of Functional Wood Plastic Composites Manufacturing Technology and Automation Equipment : 1 ~ 84

  2. [학술대회] B. S. Kim / 2013 / Development of Automatic Manufacturing System for Functional Wood Plastic Composites Ⅱ / Proceedings of the KSME 2012 Spring Annual Meeting : 503 ~ 507

  3. [학술지] 신백우 / 2011 / 합성목재의 연기밀도특성 분석에 관한 연구 / 한국화재소방학회 논문지 25 (3) : 119 ~ 124

  4. [학위논문] 임진수 / 2014 / 목분 컴파운드의 배합에 따른 합성목재 제품특성 연구

  5. [학술지] 김철현 / 2008 / 목편의 크기와 함량이 복합재료의 물성에 미치는 영향 / 펄프종이기술 40 (3) : 59 ~ 64

  6. [학술지] 강인애 / 2009 / 목분-폴리프로필렌 복합재의 기계적 특성: 목재수종, 충진제 입자크기 및 상용화제의 영향 / 목재공학 37 (6) : 505 ~ 516

  7. [학술지] Ondrej Grexa / 2001 / Flammability Parameters of Wood Tested on a Cone Calorimeter / Polymer Degradation Stability 74 : 427 ~ 432

  8. [학술지] 김봉석 / 2014 / 중세선 연속 스트레이트 와이어 자동 제조장치 개발 / 한국기계기술학회지 16 (4) : 1759 ~ 1765

  9. [학술지] 오익수 / 2015 / 기능성 합성목재 자동 제조장치 개발(합성목재에 철심을 삽입한 경우) / 한국기계기술학회지 17 (2) : 439 ~ 445