초록

The waste casting sands generated from foundry is about 4,000 tons/day and the great part of them is handled by the method of reclamation and just 10% of them is recycled as a sand. This study is to produce the iron lump of high quality material through melting iron particle which is obtained from thewaste casting sands. By using the high frequency inductive melting furnace after separating iron particle from casting sand by collision and vibrating classifier, iron lump is produced from melting iron particles. The iron lump of iron content of 96.95% is produced from iron particle of 68.05% through this process. It was investigated that the cost of iron lump is four times higher than the one of iron particle and to produce iron lump is worth to 325 won per kg against iron particle with considering the consumed power(electric energy). Therefore, to produce iron lump from waste casting sands is not only to be economical worth but also to strengthen the ground resources system.

키워드

Waste Foundry Sand(폐주물사), Iron Particle(철 입자), Iron Lump(철 괴), Iron content(철 함유량), High Frequency Inductive Melting Furnace(고주파유도용유로), Recycling(재자원화)

참고문헌(12)open

  1. [학술지] C. O. Choi / 2010 / The Trend of Development for Recycling and Re-use of Foundry Waste / Journal of Korea Foundry Society 30 (1) : 14 ~ 21

  2. [학술지] 김영준 / 2010 / 폐주물사의 재활용 활성화 방안에 관한 연구 / 유기물자원화 18 (4) : 38 ~ 44

  3. [학술지] H. Gi / 2009 / An analysis of the properties of mortar according to the change of the replacement rate waste foundry sands / Journal of Recycled Construction Resources Institute 4 (4) : 99 ~ 104

  4. [학술지] R. Siddique / 2011 / Utilization of waste foundry sand(WFS)in concrete manufacturing / Resources Conservation and Recycling 55 (11) : 885 ~ 892

  5. [학술지] M. Zanetti / 2006 / Recovery of foundry sands and iron fractions from an industrial waste landfill / Resources Conservation and Recycling 48 (4) : 396 ~ 411

  6. [학술지] Y. Guney / 2010 / Re-usage of waste foundry sand in high-strength concrete / Waste Management 30 (8) : 1705 ~ 1713

  7. [학술지] W. S. Chung / 1996 / Analysis of Energy and Material Balance in Smelting Process of Waste Sand / Journal of Korea Foundry Society 15 (5) : 477 ~ 482

  8. [학술지] 권오경 / 2007 / 고주파 유도가열을 사용한 급속 금형가열에 관한 연구 / 대한기계학회논문집 A 31 (5) : 594 ~ 600

  9. [학술지] M. Kranjc / 2010 / Numerical analysis and thermographic investigation of induction heating / International Journal of Heat and Mass Transfer 53 (17) : 3585 ~ 3591

  10. [학술지] D. Erach / 1976 / Fluid Velocities in Induction Melting Furnaces-Part I. Theory and Laboratory Experiments / Metallurgical Transactions B 7 (3) : 343 ~ 351

  11. [학술지] J. W. Kim / 2000 / A Study on the Shape Memory Effect by Heating Conditions of the Shape Memory Alloy in Iron Base as Vehicle Sheet Plate / Jou. of Korean Soc. of Mechanical Technology 2 (2) : 1 ~ 8

  12. [학술지] 박명호 / 2011 / 열분해 소각시설에서의 일반폐기물의 연소특성 / 한국기계기술학회지 13 (4) : 149 ~ 156