초록

As CFRP with only a single material shows the various fracture properties, it has been applied to the many areas through the whole industry. The method bonding with adhesive has been recommended toapply the CFRP to structure. But it is inevitable that the mechanical joints with bolt, nut and rivet have been used sometimes. This study investigates the effect that these joints influence the CFRP panelthrough the analysis result. The analysis models as CFRP panels with the thickness of 5 mm have four kinds of layer angles which are 30°, 45°, 60° and 75°. The fracture property is examined when thepressure by the mechanical joint is applied to the upper panel. As the joint pressure is distributed most effectively in case of the layer angle of 60°, it is shown that this pressure becomes lower and the deformation of panel becomes lowest. On the basis of this study result, it is thought that the foundation data for the design of CFRP structure can be provided and contributed to the safety design of structure.

키워드

CFRP(탄소섬유강화플라스틱), Fracture property(파괴 특성), Mechanical joint(기계적 체결), Pressure(압력), Layer angle(적층)

참고문헌(6)open

  1. [학술지] 최해규 / 2012 / 알루미늄 폼으로 된 DCB 모델의 피로해석에 관한 연구 / 한국기계기술학회지 14 (6) : 39 ~ 43

  2. [학술지] O. T. Thomsen / 1996 / PLY DROP-OFF EFFECTS IN CFRP/HONEYCOMB SANDWICH PANELS-THEORY / Composites Science and Technology 56 : 407 ~ 422

  3. [학술지] Martin Rinker / 2011 / Face sheet debonding in CFRP/PMI sandwich structures under quasi-static and fatigue loading considering residual thermal stress / Engineering Fracture Mechanics 78 : 2835 ~ 2847

  4. [학술지] M. Mohamed / 2015 / Manufacturing and characterization of polyurethane based sandwich composite structures / Composite Structures 123 : 169 ~ 179

  5. [학술지] 양현수 / 2012 / CF/Epoxy 복합재 적층쉘의 항공기 부재 충격특성에 관한 연구 / 한국기계기술학회지 14 (6) : 17 ~ 24

  6. [학술지] V. N. Pilipchuk / 2013 / Low temperature brittle debond damage under normal compression of sandwich plates : Analytical modeling and experimental validation / Composite Structures 98 : 24 ~ 33