KEPCO Journal on Electric Power and Energy

Korea Electric Power Corporation (한국전력공사)
권호 표지
DOI QR코드

DOI QR Code

Development of Supply Capability Calculation and Prediction Technology for Generator

발전기 공급능력 산정 및 예측 기술개발

  • Kim, Euihwan (KEPCO Research Institute, Korea Electric Power Corporation) ;
  • An, Youngmo (KEPCO Research Institute, Korea Electric Power Corporation) ;
  • Hong, Eunkee (KEPCO Research Institute, Korea Electric Power Corporation)
  • Received : 2016.04.22
  • Accepted : 2016.08.02
  • Published : 2016.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

Supply Capability of the generator, if the maximum demand occurs, refers to the maximum power that can be stably supplied and it is possible to maintain stable power supply to be greater than actual load. However, unexpected power demand and reduction in supply Capability due to stop of unexpected generator in operation can temporarily make a big chaos in power system. In fact, due to a lack of power supply Capability in the country, enforced emergency load adjustment to the September 15, 2011, the circulation power outage has occurred in several cities. As the result, interrupted operation of the elevator and stopped hospital medical equipment led to a great deal of trouble to people's lives, causing a social problem. At that time, it was found that a failed frequency control because of smaller actual supply Capability than that of predicted. The difference was about 1,170 MW with Gas turbine power plant. By accurately calculating the generator supply capability, we can not only grasp the power reserve rate, but also correspond to the time of power supply instability.

Keywords

References

  1. Euihwan kim, "Algorithm Design of supply Capability for Generator," KEPRI TM, 2014.
  2. "Dictionary of Electric Power Transaction," KPX, 2005.
  3. "Guide book of Performance test", KEPRI 2007.
  4. "ASME PTC 22, Gas Turbine," ASME, New York, 2005.
  5. "ASME PTC 4.4, Heat Recovery Steam Generators," ASME, New York, 2008.
  6. "ASME PTC 46, Overall performance Test Code," ASME, New York, 1996.
  7. Euihwan kim, "Report of Ilsan #2 Unit", KEPRI 2013.
  8. Euihwan kim, "Performance test Information book of Thermal Power Plant", 2014.
  9. Jaehoon Chang "Control of Boiler and Turbine," Korea Power Learning Institute, 2010.
  10. Youngchang kim, "Blackout and power system operation," 2015.
  11. Allen J. Wood, Bruce F. Wollenberg, "Power Generation, Operation, and Control," Wiley, 2013.
  12. ASME PTC, "Performance Test Code for Steam Generating Unit"," ASME, New York, 1991.