Izvorni znanstveni članak

https://doi.org/10.21278/TOF.41307

Corrosion Resistance of AISI 316Ti Stainless Steel Subjected to Shot Peening with and without Pickling in Various Chloride Environments

Tatiana Liptáková orcid.org/0000-0001-7251-8667 ; University of Žilina, Faculty of Mechanical Engineering, Department of Material Engineering, Žilina, Slovakia
Ayman Alaskari ; Department of Mechanical Manufacturing Engineering Technology, College of Technological Studies, PAAET, Kuwait
Libor Trško ; Research Centre of the University of Žilina, Žilina, Slovakia
Sylvia Dundeková ; Research Centre of the University of Žilina, Žilina, Slovakia

Sažetak

Surface conditions of materials affect the chemical, physical and mechanical properties of stainless steels. The main interest of this paper is to focus on corrosion properties of the AISI 316Ti stainless steel treated by shot peening and shot peening and pickling. In the last years shot peening has been widely used as a method improving fatigue properties of components under cyclical load. Because surface finishing has strong effect on corrosion susceptibility of stainless steels, e. g. pitting and created pits can initialize cracks, it is important to analyse corrosion behaviour of the material in question. In this study, the tested surfaces were characterized by SEM, EDX analyses, measurement of surface free energy and roughness. Corrosion properties were investigated in various environments by exposure, potentiodynamic cyclic and EIS tests.

Ključne riječi

shot peening; stainless steel; corrosion; pitting

Hrčak ID:

187776

URI

https://hrcak.srce.hr/187776

Datum izdavanja:

18.10.2017.

Posjeta: 2.805 *