Ultrasonic welding of dissimilar materials: A review
Abstract
Full Text:
PDFReferences
Annoni M, Carboni M. Ultrasonic metal welding of AA6022/T4 lap joints: Part I-Technological characterization and mechanical behavior. Sci Technol Weld joining 2011; 16(2):107-15
Weare NE, Monroe RE. Ultrasonic welding of heat-resistant metals. Weld Res Suppl 1961:35s-7s
Bakavos D, Prangell PB. Mechanism of joint and microstructure formation in high power ultrasonic welding 6111 aluminum automotive sheet. Mater Sci Eng A 2010: 527: 6320-34
Patel VK, Bhole SD, Chen DL, Influence of ultrasonic welding on microstructure in a magnesium alloy. Scr Mater 2011; 659:11-914
Kim J. Weldability of Cu54Zr22Ti18Ni6 bulk metallic glass by ultrasonic welding processing. Mater 2014; 130: 160-163
Kim J. Weldability of Cu54Zr22Ti18Ni6 bulk metallic glass by ultrasonic welding processing. Mater 2014; 130: 160-163
Ahmad M, Akhter J. I, Babu S.S, Choudary M.A, Tariq N.H, Shakil M. Effect of ultrasonic welding parameters on microstructure and mechanical properties of dissimilar joints. Mater 2014; 55: 263-273
Ahmad M, Akhter J. I, Babu S.S, Choudary M.A, Tariq N.H, Shakil M. Effect of ultrasonic welding parameters on microstructure and mechanical properties of dissimilar joints. Mater 2014; 55: 263-273
Ahmad M, Akhter J. I, Babu S.S, Choudary M.A, Tariq N.H, Shakil M. Effect of ultrasonic welding parameters on microstructure and mechanical properties of dissimilar joints. Mater 2014; 55: 263-273
Ahmad M, Akhter J. I, Babu S.S, Choudary M.A, Tariq N.H, Shakil M. Effect of ultrasonic welding parameters on microstructure and mechanical properties of dissimilar joints. Mater 2014; 55: 263-273
Pollock TM. Weight loss with magnesium alloys. Science 2010;328:986–7.
Nie JF, Zhu YM, Liu JZ, Fang XY. Periodic segregation of solute atoms in fully coherent twin boundaries. Science 2013;340(6135):957–60.
McNutt M. Climate change impacts. Science 2013;341(6145):435.
Ash C, Culotta E, Fahrenkamp-Uppenbrink J, Malakoff D, Smith J, Sugden A, et al. Once and future climate change. Science 2013;341:472–3.
Murray J, King D. Climate policy: oil’s tipping point has passed. Nature 2012;481(7382):433–5.
Shakun JD, Clark PU, He F, Marcott SA, Mix AC, Liu ZY, et al. Global warming preceded by increasing carbon dioxide concentrations during the last deglaciation. Nature 2012;484(7392):49–54.
Joost WJ. Reducing vehicle weight and improving U.S. energy efficiency using integrated computational materials engineering. JOM 2012;64:1032–8
Ghali E, Dietzel W, Kainer KU. General and localized corrosion of magnesium alloys: a critical review. J Mater Eng Perf 2013;22(10):2875–91.
Fang DQ, Ma N, Cai KL, Cai XC, Chai YS, Peng QM. Age hardening behaviors, mechanical and corrosion properties of deformed Mg–Mn–Sn sheets by prerolled treatment. Mater Des 2014;54:72–8
Gu YH, Cai XJ, Guo YJ, Ning CY. Effect of chloride ion level on the corrosion performance of MAO modified AZ31 alloy in NaCl solutions. Mater Des 2013;43:542–8.
Hütsch LL, Hütsch J, Herzberg K, dos Santos JF, Huber N. Increased room temperature formability of Mg AZ31 by high speed friction stir processing. Mater Des 2014;54:380–8.
Wu XX, Yang XY, Ma JJ, Huo QH, Wang J, Sun H. Enhanced stretch formability and mechanical properties of a magnesium alloy processed by cold forging and subsequent annealing. Mater Des 2013;43:206–12.
Zhang H, Huang GS, Roven HJ, Wang LF, Pan FS. Influence of different rolling routes on the microstructure evolution and properties of AZ31 magnesium alloy sheets. Mater Des 2013;50:667–73.
Macwan A, Jiang XQ, Li C, Chen DL. Effect of annealing on interface microstructures and tensile properties of rolled Al/Mg/Al tri-layer clad sheets. Mater Sci Eng A 2013;587:344–51. [25] Zhang XP, Castagne S, Yang TH, Gu CF, Wang JT. Entrance analysis of 7075 Al/ Mg–Gd–Y–Zr/7075 Al laminated composite prepared by hot rolling and its mechanical properties. Mater Des 2011;32:1152–8.
Kim IK, Hong SI. Effect of component layer thickness on the bending behaviors of roll-bonded tri-layered Mg/Al/STS clad composites. Mater Des 2013;49:935–44.
Zhang XP, Yang TH, Castagne S, Gu CF, Wang JT. Proposal of bond criterion for hot roll bonding and its application. Mater Des 2011;32(4):2239–45.
Lee KS, Yoon DH, Kim HK, Kwon YN, Lee YS. Effect of annealing on the interface microstructure and mechanical properties of a STS–Al–Mg 3-ply clad sheet. Mater Sci Eng A 2012;556:319–30.
Lee KS, Kim JS, Jo YM, Lee SE, Heo J, Chang YW, et al. Interface-correlated deformation behavior of a stainless steel–Al–Mg 3-ply composite. Mater Charact 2013;75:138–49.
Chang H, Zheng MY, Gan WM, Xu C, Brokmeier HG. Texture evolution of the Mg/Al laminated composite by accumulative roll bonding at ambient temperature. Rare Metal Mater Eng 2013;42(3):441–6.
Luo CZ, Liang W, Chen ZQ, Zhang JJ, Chi CZ, Yang FQ. Effect of high temperature annealing and subsequent hot rolling on microstructural evolution at the bond-interface of Al/Mg/Al alloy laminated composites. Mater Charact 2013;84:34–40.
Matsumoto H, Watanabe S, Hanada S. Fabrication of pure Al/Mg–Li alloy clad plate and its mechanical properties. J Mater Process Technol 2005;169:9–15
Yingwei Yang, Biao Cao. Investigation of resistance heat assissted ultrasonic welding of 6061 Aluminum alloys to pure copper. Materials and Design 74 (2015) 19-24
Patel V.K, Bhole S.D, Chen D.L, Ni D.R, Xiao B.L, Ma Z.Y, Solid-state ultrasonic spot welding of SiCp/2009Al composite sheets. Materials and Design 65 (2015) 489–495
DOI: http://dx.doi.org/10.21533/pen.v3i1.44
Refbacks
- There are currently no refbacks.
Copyright (c) 2015 Periodicals of Engineering and Natural Sciences (PEN)
ISSN: 2303-4521
Digital Object Identifier DOI: 10.21533/pen
This work is licensed under a Creative Commons Attribution 4.0 International License