Estimation of Coating Materials Contribution to the TVOCs Emissions of Wood Flooring in Indoor Environment

Aliaa Abass Mahmoud (1)
(1) Teaching assistant, Architecture Department, Mansoura College Academy, Dakahlia, Egypt, Egypt
https://doi.org/10.21625/essd.v4i2.557

Article Sidebar

Issue
Vol. 4 Issue 2 (2019): Innovative Approaches Towards Preserving the Environment
Submitted
June 30, 2019
Published
June 30, 2019
Keywords:
    Wood coating materials, volatile organic compounds, Simulation software, Finishing materials, Interior spaces
PDF

Abstract

Based on the increasing concern about the exposure to volatile organic compounds () from indoor finishing materials, industrial companies are called to meet the growing demand for more sustainable products. Recently, most designers and consumers have more environmental considerations while selecting the finishing materials. These considerations are related to thecontent of the finishing material itself regardless of its coating layers. Nowadays, interior wood coatings are commonly applied to large surfaces (ceilings, walls, floors) and many types of furnishing, leading to a high loading factor (surface-to-volume ratio). These coatings might contribute significantly to theemissions due to repeatedly and periodically use during maintenance, remodeling, and renovation of interior spaces.The aim of this study is to estimate the wood coating materials contribution to theemissions of wood product in the indoor environment to shed light on the importance of comprehensive analysis of wood material with all treatment coatings. So, a small interior space with controlled temperature, relative humidity, and air exchange rate was simulated using IA-Quest program to investigate the influence of three wood coating materials; stain, wax, and varnish which were applied to an area of natural hardwood Oak floor. Theemission data resulted from the different coated wood floor was compared withemissions caused by the natural wood floor to find out the coating material contribution inemissions of a wood flooring material.

Full text article

Generated from XML file

References

Bacaloni, A., Insogna, S., & Zoccolillo, L. (2011). Indoor Air Quality. Volatile Organic Compounds: Sources, Sampling and Analysis. In Chemistry, Emission Control, Radioactive Pollution and Indoor Air Quality. Italy: InTech.

Black, M., Pearson, W., & Work, L. (1991). A methodology for determining VOC emissions from new SBR latex-backed carpet, adhesives, cushions, and installed systems and predicting their impact on indoor air quality. In (p. 267-72). Atlanta, USA.

Bluyssen, M. P. . (2009). The Indoor Environment Handbook: How to make buildings healthy and comfortable. (3th edition ed.). Routledge)

Bodalal, A. (1999). Fundamental mass transfer modeling of emission of volatile organic compounds from building materials.

Daisey, J., M., Angell, W. J., & Apte, M. G. (2003). Indoor air quality, ventilation and health symptoms in schools: an analysis of existing information. Indoor, 13(1), 53-64.

Flexner, B. (1993). Understanding Wood Finishing. Pan Macmillan. Retrieved, 9, 24.

Haghighat, F., & Huang, H. (2003). Integrated IAQ model for prediction of VOC emissions from building material. Building and. Environment, 38(8), 1007-1017. Retrieved from https://sciencedirect.com/science/article/ pii/s0360132303000647

Hussain, M., He, Y. L., Mohamad, A., & Tao, W. Q. (2015). A new hybrid algorithm for numerical simulation of VOC emissions using single-layer and multilayer approaches. Numerical Heat Transfer, Part B: Fundamentals, 67(3), 211- 230.

Kim, S. (2010). The reduction of formaldehyde and VOCs emission from wood-based flooring by green adhesive using cashew nut shell liquid (CNSL). Journal of Hazardous Materials, 182, 919-922. Retrieved from https://sciencedirect.com/science/article/pii/s0304389410003092

Low, J., Zhang, J., Plett, E., & Shaw, C. (1998). Effects of airflow on emissions of volatile organic compounds from carpet adhesive assemblies. ASHRAE Transactions, 104(2), 1281-1288.

Rowell, R. (2012). Handbook of wood chemistry and wood composites. CRC press.

Santamouris, M., & Allard, F. (2000). Natural ventilation in buildings: a design handbook. Earthscan.

Shupe, T. F., Lebow, S., & Ring, D. (2008). Causes and control of wood decay, degradation. Retrieved from from https:// fpl.fs.fed.us/documnts/pdf2008/fpl 2008 shupe001.pdf

Willem, H., & Hult, E. (2013). Ventilation control of volatile organic compounds in new US homes: results of a controlled field study in nine residential units. LBNL.

Won, D., Magee, R., Yang, W., Lusztyk, E., Nong, G., & Shaw, C. (2005). A material emission database for 90 target VOCs. Indoor air.

Xu, J., & Zhang, J. S. (2009). Modeling Emissions from a Multi-layer Furniture Material Assembly.

Xu, Y., & Zhang, Y. (2003). An improved mass transfer based model for analyzing VOC emissions from building materials. Atmospheric Environment, 37(18), 2497-2505. Retrieved from https://sciencedirect.com/science/ article/pii/s1352231003001602

Yang, X., Chen, Q., Zeng, J., Zhang, J., & Shaw, C. (2001). A mass transfer model for simulating volatile organic com- pound emissions from ‘wet’ coating materials applied to absorptive substrates. International Journal of Heat and Mass Transfer, 44(9), 1803-1815. Retrieved from https://engineering.purdue.edu/

Yang, X., Chen, Q., Zhang, J., Magee, R. J., Zeng, J., & Shaw, C. (2001). Numerical simulation of VOC Emissions from Dry Materials. Building and. Environment, 36(10), 1099-1107. Retrieved from https://engineering.purdue.edu/

Authors

Aliaa Abass Mahmoud
Teaching assistant, Architecture Department, Mansoura College Academy, Dakahlia, Egypt
[email protected] (Primary Contact)
Mahmoud, A. A. (2019). Estimation of Coating Materials Contribution to the TVOCs Emissions of Wood Flooring in Indoor Environment. Environmental Science & Sustainable Development, 4(2), 75–84. https://doi.org/10.21625/essd.v4i2.557
Download Citation
Endnote/Zotero/Mendeley (RIS) BibTeX

Copyright (c) 2019 International Journal of Environmental Science & Sustainable Development

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Creative Commons License

  • The Author shall grant to the Publisher and its agents the nonexclusive perpetual right and license to publish, archive, and make accessible the Work in whole or in part in all forms of media now or hereafter known under a Creative Commons Attribution 4.0 License or its equivalent, which, for the avoidance of doubt, allows others to copy, distribute, and transmit the Work under the following conditions:
  • Attribution: other users must attribute the Work in the manner specified by the author as indicated on the journal Web site;

With the understanding that the above condition can be waived with permission from the Author and that where the Work or any of its elements is in the public domain under applicable law, that status is in no way affected by the license.

  • The Author is able to enter into separate, additional contractual arrangements for the nonexclusive distribution of the journal's published version of the Work (e.g., post it to an institutional repository or publish it in a book), as long as there is provided in the document an acknowledgement of its initial publication in this journal.
  • Authors are permitted and encouraged to post online a pre-publication manuscript (but not the Publisher's final formatted PDF version of the Work) in institutional repositories or on their Websites prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (see The Effect of Open Access). Any such posting made before acceptance and publication of the Work shall be updated upon publication to include a reference to the Publisher-assigned DOI (Digital Object Identifier) and a link to the online abstract for the final published Work in the Journal.
  • Upon Publisher's request, the Author agrees to furnish promptly to Publisher, at the Author's own expense, written evidence of the permissions, licenses, and consents for use of third-party material included within the Work, except as determined by Publisher to be covered by the principles of Fair Use.
  • The Author represents and warrants that:
  • The Work is the Author's original work;
  • The Author has not transferred, and will not transfer, exclusive rights in the Work to any third party;
  • The Work is not pending review or under consideration by another publisher;
  • The Work has not previously been published;
  • The Work contains no misrepresentation or infringement of the Work or property of other authors or third parties; and
  • The Work contains no libel, invasion of privacy, or other unlawful matter.
  • The Author agrees to indemnify and hold Publisher harmless from Author's breach of the representations and warranties contained in Paragraph 7 above, as well as any claim or proceeding relating to Publisher's use and publication of any content contained in the Work, including third-party content.

This work is licensed under a Creative Commons Attribution 4.0 International License.


Article Details