Recent developments of an advanced numerical model for Continuous Casting of steel unveiled at the previous 2010 CSSCR Conference in Sapporo, Japan are presented. These include coupling of the existing multiphase, heat transfer and solidification model to argon injection for tracking bubble trajectories in the SEN, metal bulk and across the slag bed after passing through the metal surface. Hence, description of a method for adding gas injection in combination with a multiphase model for tracking metal/slag interfaces (Discrete Phase Model + Volume Of Fluid, DPM+VOF) is given.
Validation is supported by tests on a revamped Continuous Casting Simulator (CCS-1) based on a low melting point alloy, which can realistically replicate the flow conditions in the caster. Metal-slag-argon flow predictions were compared to observations in the physical model showing good agreement on features such as discharging jets, rolls, standing waves and argon distribution measured through a variety of techniques such as ultrasound, electromagnetic probes and video sequences.
Ultimately, the model makes possible the prediction of stable or unstable flows within the mould as a function of different argon flow-rates and bubble sizes. Application to industrial practice is an ongoing task and preliminary results are illustrated. The robustness of the model combined with direct observations in CCS-1 make possible the description of phenomena difficult to observe in the caster (e.g. argon injection and metal flow), but critical for the stability of the process and the quality of cast products.