The Adequacy of Marine Diesel Engine Model Developed for Diagnostic Test

Authors

  • T. Kniaziewicz Akademia Marynarki Wojennej w Gdyni, Śmidowicza 69, 81–103 Gdynia, Wydział Mechaniczno-Elektryczny
  • M. Zacharewicz Akademia Marynarki Wojennej w Gdyni, Śmidowicza 69, 81–103 Gdynia, Wydział Mechaniczno-Elektryczny

DOI:

https://doi.org/10.26408/108.06

Keywords:

diagnostics, modeling, adequacy

Abstract

The paper presents a research program containing basic stages such as: real object (motor–generator set), models: physical and mathematical processes occurring in the engine, development of a computer program, conducting model and empirical tests for an efficient and damaged engine and assessment of the model's adequacy. Next, the selected parameters used to assess the adequacy of the model in relation to the engine were described. The further part describes the test plan for the engine in two states of technical suitability (efficient engine and engine with cylinder 2 powered off). The final part of the article contains the results of model and empirical research as well as their analysis.

References

Hebda, M., Niziński S., Pelc, H., 1980, Podstawy diagnostyki pojazdów mechanicznych, WKiŁ, Warszawa.

[2] Korczewski, Z., Zacharewicz, M., 2007, Diagnostyka symulacyjna układu turbodoładowania okręto¬wego tłokowego silnika spalinowego, Zeszyty Naukowe AMW w Gdyni, nr 2(169).

[3] Lus, T., Łutowicz, M., 2013, Effect of Loss of Cylinder Pressure Indicating Channel Patency on Parameters Values Obtained from Indicating Graph, Hydrographic Institute of the Republic of Croatia, Split, Croatia.

[4] Łutowicz, M., 2013, Reverse IIR Filter as a Tool for Cylinder Indicating Channel Patency Impact Correction on Measured Cylinder Pressure Waveform, Journal of KONES, vol. 20, no. 2.

[5] Mańczak, K., 1976, Planowanie eksperymentu, WNT, Warszawa.

[6] Polański, Z., 1984, Planowanie doświadczeń w technice, PWN, Warszawa.

[7] Zacharewicz, M., 2009, Metoda diagnozowania przestrzeni roboczych silnika okrętowego na podstawie parametrów gazodynamicznych w kanale zasilającym turbosprężarkę, rozprawa doktorska, Akademia Marynarki Wojennej w Gdyni, Gdynia.

[8] Zacharewicz, M., Cwalina, A., 2011a, Preliminary Investigations of a Generating Set of the Ship’s Power Station in the Aspect of Diagnosing Selected Parts of its Construction al Structure, Combustion Engines, PTNSS, 2011, vol. 4.

[9] Zacharewicz, M., Cwalina, A., 2011b, The Conception of Diagnosis in Auxiliary Diesel Engine at Limited Monitoring Susceptibility in Automated Ship Power Plant, Polish Journal of Environmental Studies, Hard Olsztyn, vol. 20, no. 5A.

[10] Zacharewicz, M., Cwalina, A., 2012, Conception and Practical Application of a Measuring Device for Energetic Parameters Measurement of a Mechatronic Object, Solid State Phenomena, Trans. Tech. Publications, vol. 180.

[11] Zacharewicz, M., Cwalina, A., 2013, Research on Energetic Processes in a Marine Diesel Engine Driving a Synchronous Generator for Diagnostic Purposes PART 1. Physical Model of the Processes, Journal of Polish CIMAC, PG, vol. 8, no. 1.

[12] Zacharewicz, M., Cwalina, A., Kniaziewicz, T., 2015a, Assessment of Technical Condition of Marine Auxiliary Diesel Engine on the Basis of Electrical Measurements of Synchronous Generator, Cobustion Engines, R. 54.

[13] Zacharewicz, M., Cwalina, A., Kniaziewicz, T., 2015b, Problems of Mathematical Modeling of the Marine Diesel Engine Working Cycle for the Diagnostic Purposes, Solid State Phenomena, vol. 236.

[14] Zacharewicz, M., Kniaziewicz, T., 2016, Research on Energetic Processes in a Marine Diesel Engine Driving a Synchronous Generator for Diagnostic Purposes. Part 2 – Mathematical Model of the Processes, Journal of Polish CIMEEAC, PG, vol. 11, no. 1.

Published

2018-12-29

How to Cite

Kniaziewicz, T., & Zacharewicz, M. (2018). The Adequacy of Marine Diesel Engine Model Developed for Diagnostic Test. Scientific Journal of Gdynia Maritime University, (108), 67–80. https://doi.org/10.26408/108.06

Issue

Section

Articles