Modification of the System for Measuring Combustion Pressure in the Ship Piston Engine Sulzer AL25/30

Authors

  • J. Wysocki Uniwersytet Morski w Gdyni, Morska 81-87, 81–225 Gdynia, Wydział Mechaniczny, Katedra Siłowni Okrętowych

DOI:

https://doi.org/10.26408/108.14

Keywords:

indication, indicator diagrams, average indicated pressure, maximum combustion pressure, cylinder pressure, diagnostics, marine piston engines

Abstract

The article presents selected problems regarding the correct analysis of cylinder pressures in ship piston engines. Correctly prepared and the analyzed indicator diagram helps in formulating appropriate diagnostic conclusions, with the help of which it is possible to achieve the optimal, in economic and environmental terms, regulation of the ship's engine. Cylinder pressure measurements are classified as difficult and also burdened with many errors. Therefore, the main topic of the article is to present a new concept for cylinder pressure measurements.

References

Cupiał, K., Dużyński, A., Gruca, M., Grzelka, J., 2001, Some Errors of Gas Engine Indication, Journal of Kones, vol. 8, no. 1–2.

[2] Gałecki, W., Tomczak, L., 2002, Indykowanie okrętowych silników spalinowych, Wydawnictwo Akademii Morskiej w Gdyni, Gdynia.

[3] H. Cegielski, Zakład Przemysłu Metalowego, Instrukcja techniczno-ruchowa silnika okrętowego Sulzer – H. Cegielski typ 3Al25, Poznań.

[4] Instrukcja obsługi programu Unitest, 2008, Gdynia.

[5] KISTLER, materiały informacyjno-reklamowe firmy, https://www.kistler.com/en/.

[6] Piotrowski, I., Witkowski, K., 2003, Okrętowe silniki spalinowe, Trademar, wydanie 3a, Gdynia.

[7] Polanowski, S., 2007, Studium metod analizy wykresów indykatorowych w aspekcie diagnostyki silników okrętowych, Zeszyty Naukowe Akademii Marynarki Wojennej w Gdyni, nr 169A.

[8] Polanowski, S., Pawletko, R., Witkowski, K., 2013, Influence of Pressure Sensor Location on the Quality of Thermodynamic Parameters Calculated from the Marine Engine Indicator Diagram, Combustion Engines, vol. 154, no. 3, s. 319–323.

[9] Tomczak, L., 2001, Wykorzystanie pośredniej metody określania położenia wału korbowego w indykatorze elektronicznym, praca doktorska, Politechnika Gdańska, Wydział Mechaniczny.

[10] UNITEST, materiały informacyjno-reklamowe firmy, http://www.unitest.pl/.

[11] Wajand, J., 1974, Pomiary szybkozmiennych ciśnień w maszynach tłokowych, WNT, Warszawa.

Downloads

Published

2018-12-29

How to Cite

Wysocki, J. (2018). Modification of the System for Measuring Combustion Pressure in the Ship Piston Engine Sulzer AL25/30. Scientific Journal of Gdynia Maritime University, (108), 168–180. https://doi.org/10.26408/108.14

Issue

No. 108 (2018)

Section

Articles

License

Copyright (c) 2018 The Author(s)

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Authors retain the copyright to their work, licensing it under the Creative Commons Attribution License Attribution 4.0 International licence (CC BY 4.0) which allows articles to be re-used and re-distributed without restriction, as long as the original work is correctly cited. The author retains unlimited copyright and publishing rights.