Comparison of Calculating Algorithms for Logarithmic Decrements Applied to Welded Joints Assessments

1

Gdynia Maritime University, 81-87 Morska St., 81-225 Gdynia, Poland, Faculty of Maritime Engineering, a.szelezinski@wm.umg.edu.pl

2

Gdynia Maritime University, 81-87 Morska St., 81-225 Gdynia, Poland, Faculty of Electrical Engineering, a.muc@we.umg.edu.pl

3

Gdynia Maritime University, 81-87 Morska St., 81-225 Gdynia, Poland, Faculty of Maritime Engineering,
l.murawski@wm.umg.edu.pl

4

Gdynia Maritime University, 81-87 Morska St., 81-225 Gdynia, Poland, Faculty of Maritime Engineering, t.muchowski@wm.umg.edu.pl

5

Polish Naval Academy of the Heroes of Westerplatte, 69 Śmidowicza Street, 81-127 Gdynia, Poland, Faculty of Mechanical and Electrical Engineering, m.kluczyk@amw.gdynia.pl

6

Gdynia Maritime University, 81-87 Morska St., 81-225 Gdynia, Poland, Faculty of Electrical Engineering,
k.jasinski@we.umg.edu.pl

7

WSB University in Gdańsk, 238A Grunwaldzka St., 80-266 Gdańsk, Faculty of Computer Science and New Technologies, rantczak@wsb.gda.pl

Abstract: 

There are numerous non-destructive methods in welded joints investigation, but the most promising, especially in applications with steady monitoring of the structure, is the vibro-diagnostic approach. In the course of the research work, the responses were obtained and detected by accelerometers, providing valuable diagnostic information, which later was mathematically processed in the field of time or frequency. The mathematical processing aimed to distinguish significant characteristics embedded in the processes typical of the investigated joints and allow an assessment of how they were made. For this purpose, two methods were proposed, based on determining the logarithmic decrement as a function of time. Due to the complicated course of the impact responses, the method of calculating the logarithmic decrement has been suggested, involving the approximation of responses with various functions. According to the research, the analysis of changes in the logarithmic decrement as a function of time applied to welded plates was proposed, as it enables the initial assessment of joint quality.

Keywords: 
diagnostics, welded joints, non-destructive research, SHM, vibrations, spectral analysis, logarithmic decrement.
Issue: 
Pages: 
7
19
Accepted: 
25.08.2022
Published: 
31.12.2022
Download full text in pdf: 

This article is an open access article distributed under a Creative Commoms Attribution (CCBY 4.0) licence

References: 

Abrantes, R.F.D., 2014, Electronic System for Non-Destructive Testing using Eddy Currents Array Probes, TECNICO LISBOA.

Aguilar, R., Ramirez, E., Haach, V.G., Pando, M.A., 2016, Vibration-Based Nondestructive Testing as a Practical Tool for Rapid Concrete Quality Control, Construction and Building Materials.

Alencar, D.A., Silva, S.F., Vieira, A., Soares, A., 2009, Eddy Current NDT: A Suitable Tool to Measure Oxide Layer Thickness in PWR Fuel Rods, INAC.

Findeis, D., Gryzagoridis, J., Gerona, L.M., 2013, Vibration Excitation Methods Applied to Digital Shearography and ESPI. Integration Between a Dynamically Growing Crack with Stuff and Compliant Inclusions Using DIC and High-Speed Photography, Conference Proceedings of the Society for Experimental Mechanics Series.

Jalili, M.M., Mousavi, S.Y., Pirayeshfar, A.S., 2014, Flexural Free Vibration as a Non-Destructive Test for Evaluation of Viscoelastic Properties of Polymeric Composites in Bending Direction, Iranian Polymer Journal.

Kah, P., Mvola, B., Suoranta, R., 2014, Real Time Non-Destructive Testing Methods of Welding, Advanced Materials Research.

Keshtgar, A., Modarres, M., 2013, Detecting Crack Initiation Based on Acoustic Emission, Chemical Engineering Transactions.

Knoeller, S.L., Ingold, B.J., 2010, Selecting a Nondestructive Testing Method, Part VII: Acoustic Emission Testing, AMMTIAC.

Kohantorabi, M., Hossein, M.A., Shahverdi, M., Roohnia, M., 2015, Vibration Based NDT Methods to Verify Wood Drying Efficiency, Wood Industry / Drvna Industrija.

Krause, M., Dackermann, U., Jianchun, L., 2015, Elastic Wave Modes for the Assessment of Structural Timber: Ultrasonic Echo for Building Elements and Guided Waves for Pole and Pile Structures, Journal of Civil Structural Health Monitoring.

Lin, Y.B., Lai, J.S., Chang, K.C., Li, L.S., 2006, Flood Scour Monitoring System Using Fibre Bragg Grating Sensors, Smarter Mater. Struct.

Muc, A., Murawski, L., Szeleziński, A., 2018, Methods of Cracks Detection in Marine Structures' Welded Joints Based on Signals' Time Waveform Analysis, Brodogradnja/Shipbilding.

Muravin, B., 2012, Acoustic Emission Method for Diagnostic and Structural Health Monitoring of Critical Structures During Operation, HDKBR INFO Magazine.

Murawski, L., Ostachowicz, W., Opoka, S., Mieloszyk, M., Majewska, K., 2012, Practical Application of Monitoring System Based on Optical Sensors for Marine Constructions, Key Engineering Materials.

Ohtsu, M., 2016, Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures, Springer Netherlands.

Onqpeng, J.M.C., Oreta, A.W.C., Hirose, S., 2018, Monitoring Damage Using Acoustic Emission Source Location and Computational Geometry in Reinforced Concrete Beams, MDPI.

Pincu, R., Kleinberger-Riedrich, O., 2011, Advanced Digital Radiography for Field NDT, International Symposium on Digital Industrial Radiology and Computed Tomography.

Porto, R.W., Brusamarello, V.J., Azambuja, R., 2013, Design and Analysis of a GMR Eddy Current probe for NDT, Seventh International Conference on Sensing Technology.

Runnemalm, A., 2012, Vibration Induced Disturbances in Automatic Non-destructive Testing, 18th World Conference on Nondestructive Testing.

Sanchez, P.S., Negro, P.L., Garcia-Fogeda, P., 2016, Vibration-Based Method for Damage Detection at Welded Beams and Rods, Latin American Journal of Solids and Structures.

Szeleziński, A., Muc, A., Murawski, L., 2017, Analysis Concerning Changes of Structure Damping in Welded Joints Diagnostics, Journal of KONES Powertrain and Transport, European Science Society of Powertrain and Transport Publication.

Szeleziński, A., Murawski, L., Muc, A., 2016, Analysis of Ability to Detect Defects in Welding Structures with Usage of Dynamic Characteristics Spectrums, Journal of KONES Powertrain and Transport, European Science Society of Powertrain and Transport Publication.

Vospernig, M., Reiterer, M., Vill, M., 2013, Simplified Crack Appearance Monitoring at Welded Joints with Strain Gauges, 6th European Workshop on Structural Health Monitoring.

Xin, L., 2012, Eddy Current Techniques for Non-destructive Testing of Carbon Fibre Reinforced Plastic (CFRP), The University of Manchester.

Adam Szeleziński

Citation pattern: Szeleziński A., Muc A., Murawski L., Muchowski T., Kluczyk M., Jasiński K., Antczak-Jarząbska R., Comparison of Calculating Algorithms for Logarithmic Decrements Applied to Welded Joints Assessments, Scientific Journal of Gdynia Maritime University, No. 124, pp. 7-19, 2022

BibTeX     EndNote