The Influence of TIG Welding Technology on the Properties and Quality of Joints Made of Dissimilar Steels

1

Gdynia Maritime University, Morska 81-87, 81-225 Gdynia, Poland, Faculty of Marine Engineering, Department of Marine Maintenance, e-mail: a.wieczorska@wm.umg.edu.pl

2

Gdynia Maritime University, Morska 81-87, 81-225 Gdynia, Poland, Faculty of Marine Engineering, Department of Marine Maintenance, e-mail: t.dyl@wm.umg.edu.pl

Abstract: 

The paper presents a new technology for welding dissimilar steels using the TIG method. Following the welding, the joint was subjected to non-destructive testing, and subsequently a Vickers hardness measurement. The tests were intended to determine whether the newly developed welding technology was properly prepared and if such joints were feasible. This particularly applies to dissimilar materials joined by welding.

Keywords: 
welding technology, 13CrMo4-5 steel, K18 steel
Issue: 
Pages: 
20
30
Accepted: 
10.11.2022
Published: 
31.12.2022
Download full text in pdf: 

This article is an open access article distributed under a Creative Commoms Attribution (CCBY 4.0) licence

References: 

Cicholska, M., Czechowski, M., Materiałoznawstwo okrętowe, Wydawnictwo Akademii Morskiej w Gdyni, Gdynia 2013.

Czuchryj, J., Sikora, S., Badania nieniszczące w praktyce spawalniczej, Agenda Wydawnicza SIMP, Warszawa 2018.

Ferenc, K., Spawalnictwo, WNT, Warszawa 2013.

Gourd, L.M., Podstawy technologii spawalniczych, WNT, Warszawa 1997.

Kamiński, M., Opracowanie technologii spawania stali wysokostopowych metodą TIG, praca dyplomowa inżynierska, 2021 (not published).

Klimpel, A., Podręcznik spawalnictwa. Technologie spawania i cięcia, Wydawnictwo Politechniki Śląskiej, Gliwice 2013.

Łabanowski, J., Stale odporne na korozję i ich spawalność, Wydawnictwo Politechniki Gdańskiej, Gdańsk 2010.

Łomozik, M.E., Metaloznawstwo i spawalność stali, ISP, Gliwice 1997.

Pilarczyk, J., Poradnik inżyniera. Spawalnictwo, WNT, Warszawa 2014.

Tasak, E., Spawalność stali, FOTOBIT, Kraków 2002.

Wieczorska, A., Domżalski, R., The Influence of Submerged ARC Welding Conditions on the Properties of S355JR Structural Steel Joints, 2021, pp. 19–29.

Agata Wieczorska

Citation pattern: Wieczorska A., Dyl T., The Influence of TIG Welding Technology on the Properties and Quality of Joints Made of Dissimilar Steels, Scientific Journal of Gdynia Maritime University, No. 124, pp. 20-30, 2022

BibTeX     EndNote