Rheological and filtration characteristics of drilling fluids enhanced by nanoparticles with selected additives: an experimental study
Abstract view|705|times PDF download|262|times
Abstract
The suspension properties of drilling fluids containing pure and polymer-treated (partially-hydrolyzed polyacrylamide (PHPA) or Xanthan gum) clay nanoparticles are compared withthose of a conventional water-and-bentonite-based drilling fluid, used as the referencesample. Additionally, the mud weight, plastic viscosity, apparent viscosity, yield point, primary and secondary gelatinization properties, pH, and filtration properties of the various drilling fluids studied are also measured and compared. The performance of each drilling fluid type is evaluated with respect in terms of its ability to reduce mud cake thickness and fluid loss thereby inhibiting differential-pipe-sticking. For that scenario, the mud-cake thickness is varied, and the filtration properties of the drilling fluids are measured as an indicator of potential well-diameter reduction, caused by mud cake, adjacent to permeable formations. The novel results show that nanoparticles do significantly enhance the rheological and filtration characteristics of drilling fluids. A pure-clay-nanoparticle suspension, without any additives, reduced fluid loss to about 42% and reduced mud cake thickness to 30% compared to the reference sample. The xanthan-gum-treated-clay-nanoparticle drilling fluid showed good fluid loss control and reduced fluid loss by 61% compared to the reference sample. The presence of nanofluids also leads to reduced mud-cake thicknesses, directly mitigating the risks of differential pipe sticking.
Cited as: Mohamadian, N., Ghorbani, H., Wood, D., Hormozi, H.K. Rheological and filtration characteristics of drilling fluids enhanced by nanoparticles with selected additives: an experimental study. Advances in Geo-Energy Research, 2018, 2(3): 228-236, doi: 10.26804/ager.2018.03.01
Keywords
Full Text:
PDFReferences
Abdo, J., Haneef, M.D. Clay nanoparticles modified drilling fluids for drilling of deep hydrocarbon wells. Appl. Clay Sci. 2013, 86: 76-82.
Abdou, M.I., Al-Sabagh, A.M., Dardir, M.M. Evaluation of Egyptian bentonite and nano-bentonite as drilling mud. Egypt. J. Pet. 2013, 22(1): 53-59.
Agarwal, S., Phuoc, T.X., Soong, Y., et al. Nanoparticle-stabilised invert emulsion drilling fluids for deep-hole drilling of oil and gas. Can. J. Chem. Eng. 2013, 91(10): 1641-1649.
Amanullah, M., Al-Abdullatif, Z. Preliminary test rresults of a water-based nanofluid. Paper presented at The 8th International Conf. & Exhib. on Chemistry in Industry, Manama, Bahrain, 18-20 October, 2010.
Amanullah, M., Al-Tahini, A.M. Nano-technology-its signif-icance in smart fluid development for oil and gas field application. Paper SPE 126102 presented at SPE Saudi Arabia Section Technical Symposium, Al-Khobar, Saudi Arabia, 9-11 May, 2009.
Amanullah, M., Tan, C.P. A non-destructive method of cake thickness measurement. Paper SPE 64517 presented at SPE Asia Pacific Oil and Gas Conference and Exhibition, Brisbane, Australia, 16-18 October, 2000.
Amin, M., Abu el-Hassan, K. Effect of using different types of nano materials on mechanical properties of high strength concrete. Constr. Build. Mater. 2015, 80: 116-124.
Annis, M.R., Smith, M.V. Drilling Fluids Technology. USA, Revised Edition Exxon Company,1996. API. Recommended Practice for Field Testing Water-based Drilling Fluids. USA, American Petroleum Institute, 2003.
Azar, J.J., Lummus, J.L. The effect of drill fluid pH on drill pipe corrosion fatigue performance. Paper SPE 5516 presented at Fall Meeting of the Society of Petroleum Engineers of AIME, Dallas, Texas, 28 September-1 October, 1975.
Baghbanzadeh, M., Rashidi, A., Soleimanisalim, A.H., et al. Investigating the rheological properties of nanofluids of water/hybrid nanostructure of spherical silica/MWCNT. Thermochim. Acta 2014, 578: 53-58.
Brigatti, M.F., Galan, E., Theng, B.K.G. Developments in Clay Science: Structures and Mineralogy of Clay Minerals. USA, Elsevier, 2006.
Caenn, R., Darley, H.C.H., Gray, G.R. Composition and Properties of Drilling and Completion Fluids. Oxford, United Kingdom, Gulf professional publishing, 2011.
Chang, T., Shih, J., Yang, K., et al. Material properties of Portland cement paste with nano-montmorillonite. J. Mater. Sci. 2007, 42(17): 7478-7487.
Chilingarian, G.V., Vorabutr, P. Drilling and Drilling Fluids. USA, Elsevier scentific publishing company, 1983.
Choi, S.U.S., Eastman, J.A. Enhancing thermal conductivity of fluids with nanoparticles. Paper ANL/MSD/CP-84938, CONF-951135-29 Presented at International Mechanical Engineering Congress and Exhibition, San Francisco, CA (United States), 12-17 November, 1995.
Evdokimov, I.N., Eliseev, N.Y., Losev, A.P., et al. Emerging petroleum-oriented nanotechnologies for reservoir engi-neering. Paper SPE 102060 presented at SPE Russian Oil and Gas Technical Conference and Exhibition, Moscow, Russia, 3-6 October, 2006.
Fakoya, M.F., Shah, S.N. Enhancement of filtration properties in surfactant-based and polymeric fluids by nanoparticles. Paper SPE 171029 presented at SPE Eastern Regional Meeting, Charleston, WV, USA, 21-23 October, 2014.
Godson, L., Raja, B., Lal, D.M., et al. Enhancement of heat transfer using nanofluids-an overview. Renewable Sustainable Energy Rev. 2010, 14(2): 629-641.
Haden, E.L., Welch, G.R. Techniques for preventing differential-pressure sticking of drill pipe a laboratory study. Paper API-61-036 presented at Drilling and Production Practice, New York, 1 January, 1961.
Hoelscher, K.P., Stefano, G.D., Riley, M., et al. Application of nanotechnology in drilling fluids. Paper SPE 157031 presented at SPE International Oilfield Nanotechnology Conference and Exhibition, Noordwijk, The Netherlands, 12-14 June, 2012.
Hoelscher, K.P., Young, S., Friedheim, J., et al. Nanotechnol-ogy application in drilling fluids. Paper OMC-2013-105 presented at Offshore Mediterranean Conference and Exhibition, Ravenna, Italy, 20-22 March, 2013.
Hughes, B. Drilling Fluids Reference Manual. Houston, Texas, 2006.
Ismail, A.R., Rashid, N.M., Jaafar, M.Z., et al. Effect of nanomaterial on the rheology of drilling fluids. J. Appl. Sci. 2014, 14(11): 1192-1197.
Javeri, S.M., Haindade, Z.M.W., Jere, C.B. Mitigating loss circulation and differential sticking problems using silicon nanoparticles. Paper SPE 145840 presented at SPE/IADC Middle East Drilling Technology Conference and Exhibition, Muscat, Oman, 24-26 October, 2011.
Johannes, K.F. Petroleum Engineer’s Guide to Oil Field Chemicals and Fluids. Oxford, United Kingdom, Gulf professional publishing, 2012.
Karthikeyan, N.R., Philip, J., Raj, B. Effect of clustering on the thermal conductivity of nanofluids. Mater. Chem. Phys. 2008, 109(1): 50-55.
Kelessidis, V.C., Tsamantaki, C., Dalamarinis, P. Effect of pH and electrolyte on the rheology of aqueous Wyoming bentonite dispersions. Appl. Clay Sci. 2007, 38(1-2): 86-96.
Kelsall, R., Hamley, I.W., Geoghegan, M. Nanoscale Science and Technology. New York, USA, John Wiley & Sons, 2005.
Kloprogge, J.T., Komarneni, S., Amonette, J.E. Synthesis of smectite clay minerals: A critical review. Clays Clay Miner. 1999, 47(5): 529-554.
Kosuri, D. Polyethylene-layered double hydroxides and montmorillonite nanocomposites: Thermal, mechanical and flame retardance properties. Texas, University of North Texas, 2008.
Lyons, W.C., Plisga, G.J. Standard Handbook of Petroleum and Natural Gas Engineering. Oxford, United Kingdom, Gulf professional publishing, 2011.
Maidla, E.E. Borehole Friction assessment and application to oilfield casing design in directional wells. Louisiana, LSU Historical Dissertations and Theses, 1987.
Michael, K. ˜A., Fritzsche, W. Nanotechnology: An Introduction to Nanostructuring Techniques. New York, USA, John Wiley & Sons, 2008.
Mokhatab, S., Fresky, M.A., Islam, M.R. Applications of nanotechnology in oil and gas E&P. J. Pet. Technol. 2006, 58(4): 48-51.
Ottesen, S., Benaissa, S., Marti, J., et al. Down-hole simulation cell for measurement of lubricity and differential pressure sticking. Paper SPE 52816 presented at SPE/IADC Drilling Conference, Amsterdam, Netherlands, 9-11 March, 1999.
Outmans, H.D. Mechanics of differential pressure sticking of drill collars. Paper SPE 963 Presented at Annual Fall Meeting of Southern California Petroleum Section, Los Angeles, California, 17-18 October, 1957.
Pilgun, S., Aramelev, A. Environmentally compatible drilling fluids. Paper SPE 166847 presented at SPE Arctic and Extreme Environments Technical Conference and Exhibition, Moscow, Russia, 15-17 October, 2013.
Rao, Y. Nanofluids: Stability, phase diagram, rheology and applications. Particuology 2010, 8(6): 549-555.
Riveland, F.A. Investigation of nanoparticles for enhanced fil-tration properties of drilling fluid. Trondheim, Norwegian University of Science and Technology, 2013.
Sarkar, J. A critical review on convective heat transfer correlations of nanofluids. Renewable Sustainable Energy Rev. 2011, 15(6): 3271-3277.
Sarkar, J., Ghosh, P., Adil, A. A review on hybrid nanofluids: recent research, development and applications. Renew-able Sustainable Energy Rev. 2015, 43: 164-177.
Shakib, J.T., Kanani, V., Pourafshary, P. Nano-clays as additives for controlling filtration properties of water-bentonite suspensions. J. Pet. Sci. Eng. 2016, 138: 257-264.
Sharma, M.M., Chenevert, M.E., Guo, Q., et al. A new family of nanoparticle based drilling fluids. Paper SPE 160045 presented at SPE Annual Technical Conference and Exhibition, San Antonio, Texas, 8-10 October, 2012.
Shchukin, D.G., Sukhorukov, G.B. Nanoparticle synthesis in engineered organic nanoscale reactors. Adv. Mater. 2004, 16(8): 671-682.
Uddin, F. Clays, nanoclays, and montmorillonite minerals. Metall. Mater. Trans. A 2008, 39(12): 2804-2814.
Vipulanandan, C., Mohammed, A. Effect of nanoclay on the electrical resistivity and rheological properties of smart and sensing bentonite drilling muds. J. Pet. Sci. Eng. 2015, 130: 86-95.
Vipulanandan, C., Mohammed, A.S. Hyperbolic rheological model with shear stress limit for acrylamide polymer modified bentonite drilling muds. J. Pet. Sci. Eng. 2014, 122: 38-47.
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 The Author(s)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.