Review of Proposed Stress-dilatancy Relationships and Plastic Potential Functions for Uncemented and Cemented Sands

Authors

  • Mojtaba Rahimi Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr/Isfahan, Iran

DOI:

https://doi.org/10.30564/jgr.v1i2.864

Abstract

Stress-dilatancy relationship or plastic potential function are crucial components of every elastoplastic constitutive model developed for sand or cemented sand. This is because the associated flow rule usually does not produce acceptable outcomes for sand or cemented sand. Many formulas have been introduced based on the experimental observations in conventional and advanced plasticity models in order to capture ratio of plastic volumetric strain increment to plastic deviatoric strain increment (i.e. dilatancy rate). Lack of an article that gathers these formulas is clear in the literature. Thus, this paper is an attempt to summarize plastic potentials and specially stress-dilatancy relations so far proposed for constitutive modelling of cohesionless and cemented sands. Stress-dilatancy relation is usually not the same under compression and extension conditions. Furthermore, it may also be different under loading and unloading conditions. Therefore, the focus in this paper mainly places on the proposed stress-dilatancy relations for compressive monotonic loading. Moreover because plastic potential function can be calculated by integration of stress-dilatancy relationship, more weight is allocated to stress-dilatancy relationship in this research.

Keywords:

Stress-dilatancy, Plastic potential function, Flow rule, Dilatancy rate, Plasticity, Sand, Cemented sand

References

[1] Ajorloo, A. M., Mroueh, H., & Lancelot, L.. Experimental investigation of cement treated sand behavior under triaxial test. Geotechnical and Geological Engineering, 2012, 30(1): 129-143.

[2] Andrade, J. E.. A predictive framework for liquefaction instability. Géotechnique, 2009, 59(8): 673.

[3] Arroyo, M., Castellanza, R., & Nova, R.. Compaction bands and oedometric testing in cemented soils. Soils and foundations, 2005, 45(2): 181-194.

[4] Been, K., & Jefferies, M.. Stress dilatancy in very loose sand. Canadian Geotechnical Journal, 2004, 41(5): 972-989.

[5] Buscarnera, G., & Laverack, R. T.. Path dependence of the potential for compaction banding: Theoretical predictions based on a plasticity model for porous rocks. Journal of Geophysical Research: Solid Earth, 2014, 119(3): 1882-1903.

[6] Chang, C. S., & Yin, Z. Y.. Modeling stress-dilatancy for sand under compression and extension loading conditions. Journal of engineering mechanics, 2009, 136(6): 777-786.

[7] Chu, J., Kim, S. R., Oh, Y. N., Balasubramaniam, A. S., & Bergado, D. T.. An experimental and theoretical study on the dilatancy of sand and clays. In Proceedings of the 9th Australia–New Zealand. Conference on geomechanics, 2004, 2: 654-660.

[8] Cui, Y. J., & Delage, P.. Yeilding and plastic behaviour of an unsaturated compacted silt. Géotechnique, 1996, 46(2): 291-311.

[9] DeSimone, A., & Tamagnini, C.. Stress–dilatancy based modelling of granular materials and extensions to soils with crushable grains. International journal for numerical and analytical methods in geomechanics, 2005, 29(1): 73-101.

[10] Gao, Z., & Zhao, J.. Constitutive modeling of artificially cemented sand by considering fabric anisotropy. Computers and Geotechnics, 2012, 41: 57-69.

[11] Gao, Z., Zhao, J., Li, X. S., & Dafalias, Y. F.. A critical state sand plasticity model accounting for fabric evolution. International journal for numerical and analytical methods in geomechanics, 2014, 38(4): 370-390.

[12] Gutierrez, M., Ishihara, K., & Towhata, I.. Model for the deformation of sand during rotation of principal stress directions. Soils and Foundations, 1993, 33(3), 105-117.

[13] Haeri, S. M., & Hamidi, A.. Constitutive modelling of cemented gravelly sands. Geomechanics and Geoengineering: An International Journal, 2009, 4(2): 123-139.

[14] Hamidi, A., & Yarbakhti, P.. Constitutive modeling of cemented gravely sands including the effects of cement type. Journal of Engineering Geology, 2013, 6(2): 1525-1544.

[15] Imam, S. M. R.. Modeling the constitutive behavior of sand for the analysis of static liquefaction, 1999.

[16] Imam, S. R., Morgenstern, N. R., Robertson, P. K., & Chan, D. H.. A critical-state constitutive model for liquefiable sand. Canadian geotechnical journal, 2005, 42(3): 830-855.

[17] Jefferies, M. G.. Nor-Sand: a simple critical state model for sand. Geotechnique, 1993, 43(1): 91-103.

[18] Jefferies, M., & Been, K.. Soil liquefaction: a critical state approach. CRC press, 2015.

[19] Jefferies, M. G., & Shuttle, D. A.. Dilatancy in general Cambridge-type models. Géotechnique, 2002, 52(9): 625-638.

[20] Jin, Y., Yin, Z., Zhang, D., & Huang, H.. Unified modeling of the monotonic and cyclic behaviors of sand and clay. Acta Mechanica Solida Sinica, 2015, 28(2): 111-132.

[21] Kan, M. E., Taiebat, H. A., & Khalili, N.. Simplified mapping rule for bounding surface simulation of complex loading paths in granular materials. International Journal of Geomechanics, 2013, 14(2): 239-253.

[22] Kandasami, R. K., Singh, S., & Murthy, T. G.. Calibration and validation of Lade's constitutive model for weakly cemented sands, 2016.

[23] Khalili, N., Habte, M. A., & Valliappan, S.. A bounding surface plasticity model for cyclic loading of granular soils. International journal for numerical methods in engineering, 2005, 63(14): 1939-1960.

[24] Kim, M. K., & Lade, P. V.. Single hardening constitutive model for frictional materials: I. Plastic potential function. Computers and Geotechnics, 1988, 5(4): 307-324.

[25] Kong, X., Liu, J., Zou, D., & Liu, H.. Stress-dilatancy relationship of Zipingpu gravel under cyclic loading in triaxial stress states. International Journal of Geomechanics, 2016, 16(4): 04016001.

[26] Lade, P. V., & Kim, M. K.. Single hardening constitutive model for soil, rock and concrete. International Journal of Solids and Structures, 1995, 32(14): 1963-1978.

[27] Lagioia, R., Puzrin, A. M., & Potts, D. M.. A new versatile expression for yield and plastic potential surfaces. Computers and Geotechnics, 1996, 19(3): 171-191.

[28] Li, H. Z., Xiong, G. D., & Zhao, G. P.. An elasto-plastic constitutive model for soft rock considering mobilization of strength. Transactions of Nonferrous Metals Society of China, 2016, 26(3): 822-834.

[29] Li, X. S., & Dafalias, Y. F.. Dilatancy for cohesionless soils. Geotechnique, 2000, 50(4): 449-460.

[30] Ling, H. I., & Yang, S.. Unified sand model based on the critical state and generalized plasticity. Journal of Engineering Mechanics, 2006, 132(12): 1380-1391.

[31] McDowell, G. R.. A simple non-associated flow model for sand. Granular Matter, 2002, 4(2): 65-69.

[32] Liu, J., Zou, D., Kong, X., & Liu, H.. Stress-dilatancy of Zipingpu gravel in triaxial compression tests. Science China Technological Sciences, 2016, 59(2): 214-224.

[33] Manzari, M. T., & Dafalias, Y. F.. A critical state two-surface plasticity model for sands. Geotechnique, 1997, 47(2): 255-272.

[34] Muhunthan, B., & Sasiharan, N.. Fabric dilatancy and the plasticity modeling of granular media. International Journal for Numerical and Analytical Methods in Geomechanics, 2012, 36(9): 1181-1193.

[35] Nova, R., & Wood, D. M.. A constitutive model for sand in triaxial compression. International Journal for Numerical and Analytical Methods in Geomechanics, 1979, 3(3): 255-278.

[36] Nova, R., & Wood, D. M.. A constitutive model for soil under monotonic and cyclic loading. Soil mechanics-transient and cyclic loading, 1982: 343-373.

[37] Pastor, M., Zienkiewicz, O. C., & Leung, K. H.. Simple model for transient soil loading in earthquake analysis. II. Non‐associative models for sands. International Journal for Numerical and Analytical Methods in Geomechanics, 1985, 9(5): 477-498.

[38] Porcino, D. D., & Marcianò, V.. Bonding degradation and stress–dilatancy response of weakly cemented sands. Geomechanics and Geoengineering, 2017, 1-13.

[39] Qu, X., & Huang, M.. Numerical Simulation of Static Liquefaction of Loose Sand. In Soil Behavior and Geomechanics, 2014: 587-595.

[40] Rahimi, M.. Constitutive Modeling of Soft Sandstone Degradation under Cyclic Conditions Doctoral dissertation, University of Alberta, 2014.

[41] Rahimi, M., Chan, D., & Nouri, A.. Bounding surface constitutive model for cemented sand under monotonic loading. International Journal of Geomechanics, 2015, 16(2): 04015049.

[42] Rahimi, M., Chan, D., Nouri, A., & Rasouli, R.. Effects of inherent fabric anisotropy and intermediate principal stress on constitutive behavior of uncemented and cemented sands. Computers and Geotechnics, 2016, 80: 237-247.

[43] Rahimi, M., Chan, D., & Nouri, A.. Constitutive model for cyclic behaviour of cohesionless sands. Geomechanics and Geoengineering, 2017, 12(1): 36-47.

[44] Rahimi, M., Chan, D., & Nouri, A.. Constitutive model for monotonic and cyclic responses of loosely cemented sand formations. Journal of Rock Mechanics and Geotechnical Engineering, ,2018, 10(4): 740-752.

[45] Reddy, K. R., & Saxena, S. K.. Constitutive modeling of cemented sand. Mechanics of materials, 1992, 14(2): 155-178.

[46] Rios, S., Ciantia, M., Gonzalez, N., Arroyo, M., & da Fonseca, A. V.. Simplifying calibration of bonded elasto-plastic models. Computers and Geotechnics, 2016, 73: 100-108.

[47] Rowe, P. W.. The stress-dilatancy relation for static equilibrium of an assembly of particles in contact. In Proceedings of the royal society of London a: mathematical, physical and engineering sciences. The Royal Society, 1962, 269(1339): 500-527.

[48] Russell, A. R., & Khalili, N.. A bounding surface plasticity model for sands exhibiting particle crushing. Canadian Geotechnical Journal, 2004, 41(6): 1179-1192.

[49] Sasiharan, N.. Mechanics of dilatancy and its application to liquefaction problems, 2006, 68(02).

[50] Singh, S., Kandasami, R. K., & Murthy, T. G.. Prediction of mechanical response of geomaterials using an advanced elasto-plastic constitutive model. Procedia Engineering, 2017a， 173: 793-799.

[51] Singh, S., Kandasami, R. K., & Murthy, T. G.. Mechanics and modeling of cohesive frictional granular materials. In Advances in Laboratory Testing and Modelling of Soils and Shales, Springer, Cham, 2017b: 493-500.

[52] Sun, Y., & Xiao, Y.. Fractional order plasticity model for granular soils subjected to monotonic triaxial compression. International Journal of Solids and Structures, 2017.

[53] Sun, Y., Xiao, Y., & Ji, H.. Dilation and breakage dissipation of granular soils subjected to monotonic loading. Acta Mechanica Sinica, 2016, 32(6): 1065-1074.

[54] Szypcio, Z.. Stress-dilatancy for soils. Part I: The frictional state theory. Studia Geotechnica et Mechanica, 2016, 38(4): 51-57.

[55] Tasiopoulou, P., & Gerolymos, N.. Development of a modified elastoplasticity model for sand. In Proceedings of the second international conference on performance–based design in earthquake geotechnical engineering, Taormina (Italy), CD Rom, 2012: 28-30.

[56] Tasiopoulou, P., & Gerolymos, N.. Constitutive modeling of sand: Formulation of a new plasticity approach. Soil Dynamics and Earthquake Engineering, 2016, 82: 205-221.

[57] Taylor, D. W.. Fundamentals of soil mechanics, Wiley, New York, 1948.

[58] Van den Hoek, P. J., & Geilikman, M. B.. Prediction of sand production rate in oil and gas reservoirs. In SPE Annual Technical Conference and Exhibition. Society of Petroleum Engineers, 2003.

[59] Vermeer, P. A., & De Borst, R.. Non-associated plasticity for soils, concrete and rock. HERON, 1984, 29 (3).

[60] Wan, R. G., & Guo, P. J.. A simple constitutive model for granular soils: modified stress-dilatancy approach. Computers and Geotechnics, 1998, 22(2): 109-133.

[61] Wan, R. G., & Guo, P. J.. Effect of microstructure on undrained behaviour of sands. Canadian Geotechnical Journal, 2001, 38(1): 16-28.

[62] Wang, J.. The stress-strain and strength characteristics of Portaway Sand, Doctoral dissertation, University of Nottingham, 2005.

[63] Wang, Y. H., & Leung, S. C.. Characterization of cemented sand by experimental and numerical investigations. Journal of geotechnical and geoenvironmental engineering, 2008, 134(7): 992-1004.

[64] Wang, Z. L., Dafalias, Y. F., Li, X. S., & Makdisi, F. I.. State pressure index for modeling sand behavior. Journal of geotechnical and geoenvironmental engineering, 2002, 128(6): 511-519.

[65] Weng, M. C.. A generalized plasticity-based model for sandstone considering time-dependent behavior and wetting deterioration. Rock Mechanics and Rock Engineering, 2014, 47(4): 1197-1209.

[66] Wood, D. M.. Soil behaviour and critical state soil mechanics. Cambridge university press, 1990.

[67] Yao, Y. P., Sun, D. A., & Luo, T.. A critical state model for sands dependent on stress and density. International Journal for Numerical and Analytical Methods in Geomechanics, 2004, 28(4): 323-337.

[68] Yao, Y. P., Sun, D. A., & Matsuoka, H.. A unified constitutive model for both clay and sand with hardening parameter independent on stress path. Computers and Geotechnics, 2008, 35(2): 210-222.

[69] Yin, Z. Y., & Chang, C. S.. Stress–dilatancy behavior for sand under loading and unloading conditions. International Journal for Numerical and Analytical Methods in Geomechanics, 2013, 37(8): 855-870.

[70] Yin, Z. Y., Hicher, P. Y., Dano, C., & Jin, Y. F.. Modeling mechanical behavior of very coarse granular materials. Journal of Engineering Mechanics, 2016, 143(1): C4016006.

[71] Yu, H. S.. CASM: A unified state parameter model for clay and sand. International Journal for Numerical and Analytical Methods in Geomechanics, 1998, 22(8): 621-653.

[72] Yu, H. S., Khong, C., & Wang, J.. A unified plasticity model for cyclic behaviour of clay and sand. Mechanics research communications, 2007a, 34(2): 97-114.

[73] Yu, H. S., Tan, S. M., & Schnaid, F.. A critical state framework for modelling bonded geomaterials. Geomechanics and Geoengineering, 2007b, 2(1): 61-74.

[74] Zhang, J., & Salgado, R.. Stress-dilatancy relation for Mohr-Coulomb soils following a non-associated flow rule. Geotechnique, 2010.

Downloads

How to Cite

Rahimi, M. (2019). Review of Proposed Stress-dilatancy Relationships and Plastic Potential Functions for Uncemented and Cemented Sands. Journal of Geological Research, 1(2), 19–34. https://doi.org/10.30564/jgr.v1i2.864

Issue

Vol. 1 , Iss. 2 (July 2019)

Article Type

Review

License

Copyright © 2019 Mojtaba Rahimi

Creative Commons License

This is an open access article under the Creative Commons Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) License.

Copyright and Licensing

The authors shall retain the copyright of their work but allow the Publisher to publish, copy, distribute, and convey the work.

Journal of Geological Research publishes accepted manuscripts under Creative Commons Attribution-NonCommercial 4.0 International License (CC BY-NC 4.0). Authors who submit their papers for publication by Journal of Geological Research agree to have the CC BY-NC 4.0 license applied to their work, and that anyone is allowed to reuse the article or part of it free of charge for non-commercial use. As long as you follow the license terms and original source is properly cited, anyone may copy, redistribute the material in any medium or format, remix, transform, and build upon the material.

License Policy for Reuse of Third-Party Materials

If a manuscript submitted to the journal contains the materials which are held in copyright by a third-party, authors are responsible for obtaining permissions from the copyright holder to reuse or republish any previously published figures, illustrations, charts, tables, photographs, and text excerpts, etc. When submitting a manuscript, official written proof of permission must be provided and clearly stated in the cover letter.
The editorial office of the journal has the right to reject/retract articles that reuse third-party materials without permission.

Journal Policies on Data Sharing

We encourage authors to share articles published in our journal to other data platforms, but only if it is noted that it has been published in this journal.