Abstract
High-strength sparingly doped steel possessing high hardenability has been studied. The degree of mechanical characteristics after continuous cooling with various intensities in the range of 0.02–20°C/s has been determined. Industrial heat treatment of large parts from the steel under study has been implemented using air as the quenching medium. Successful isothermal treatment using air media, as well as preliminary cementation aimed at the increase in the surface’s wear resistance, has been demonstrated.
Similar content being viewed by others
REFERENCES
Bhadeshia, H. and Honeycombe, R., Steels: Microstructure and Properties, Amsterdam: Elsevier, 2017.
Bryson, W.E., Heat Treatment: Master Control Manual, Munich: Carl Hanser Verlag, 2015.
Steel Heat Treatment. Metallurgy and Technologies, Totten, G.E., Boca Raton, FL: CRC Press, 2006.
Maisuradze, M.V., Ryzhkov, M.A., and Yudin, Yu.V., Rapid evaluation of the cooling capacity of quenching media, Met. Sci. Heat Treat., 2015, vol. 57, nos. 7–8, pp. 515–518.
Failure Analysis of Heat Treated Steel Components, Totten, G.E., Canale, L.C.F., and Mesquita, R.A., Eds., Cleveland, OH: ASM Int., 2008.
Handbook of Residual Stress and Deformation of Steel, Totten, G.E., Howes, M., and Inoue, T., Eds., Cleveland, OH: ASM Int., 2002.
Lee, S. and Lee, Y., Finite element simulation of quench distortion in a low-alloy steel incorporating transformation kinetics, Acta Mater., 2008, vol. 56, no. 7, pp. 1482–1490.
Entin, R.I., Pankova, M.N., Uspenskaya, S.V., et al., Structure and properties of some low-carbon alloyed weldable steels, Met. Sci. Heat Treat., 1991, vol. 33, pp. 463–466.
Kleiner, L.M. and Simonov, Yu.N., Structure and properties of low-carbon martensitic steels, Met. Sci. Heat Treat., 1999, vol. 41, pp. 366–368.
Kleiner, L.M., Shatsov, A.A., and Larinin, D.M., Low-carbon martensitic steels. Alloying and properties, Met. Sci. Heat Treat., 2011, vol. 52, pp. 540–544.
Simonov, Yu.N., Panov, O.D., Simonov, M.Yu., et al., Principles of design of the chemical composition of steels for forming a structure of lower carbide-free bainite under delayed cooling, Met. Sci. Heat Treat., 2015, vol. 57, pp. 386–394.
Yurchenko, A.N., Simonov, Yu.N., Panov, D.O., and Zhitenev, A.I., Transformations, structure and properties of steel 22Kh2G2S2MF under continuous cooling, Met. Sci. Heat Treat., 2020, vol. 61, nos. 9–10, pp. 617–621.
Maisuradze, M.V., Ryzhkov, M.A., and Surnaeva, O.A., Phase transformations in novel medium carbon high hardenability steels, Solid State Phenom., 2017, vol. 265, pp. 717–722.
Maisuradze, M.V. and Ryzhkov, M.A., Phase transformations and microstructure of advanced engineering steels, Mater. Today, 2019, vol. 19, no. 5, pp. 1985–1989.
Maisuradze, M.V., Ryzhkov, M.A., and Surnaeva, O.A., Transformations of supercooled austenite in promising high-hardenability machine steels, Met. Sci. Heat Treat., 2018, vol. 60, nos. 5–6, pp. 339–347.
Ryzhkov, M.A. and Popov, A.A., Methodological aspects of plotting of thermokinetic diagrams of transformation of supercooled austenite in low-alloy steels, Met. Sci. Heat Treat., 2011, vol. 52, pp. 612–616.
Maisuradze, M.V., Yudin, Yu.V., and Ryzhkov, M.A., Numerical simulation of pearlitic transformation in steel 45Kh5MF, Met. Sci. Heat Treat., 2015, vol. 56, nos. 9–10, pp. 512–516.
Navarro-López, A., Sietsma, J., and Santofimia, M.J., Effect of prior athermal martensite on the isothermal transformation kinetics below MS in a low-C high-Si steel, Metall. Mater. Trans. A, 2016, vol. 47, pp. 1028–1039.
Maisuradze, M.V. and Ryzhkov, M.A., Thermal stabilization of austenite during quenching and partitioning of austenite for automotive steels, Metallurgist, 2018, vol. 62, nos. 3–4, pp. 337–347.
Speer, J.G., Phase transformations in quenched and partitioned steels, in Phase Transformations in Steels, Pereloma, E. and Edmonds, D.V., Eds., Cambridge: Woodhead, 2012, pp. 247–270.
Yudin, Y.V., Maisuradze, M.V., Ryzhkov, M.A., et al., Simplified simulation method of round steel bar cooling, ISIJ Int., 2015, vol. 55, no. 7, pp. 1538–1540.
Capdevila, C., Caballero, F.G., and García de Andrés, C., Determination of MS temperature in steels: a Bayesian neural network model, ISIJ Int., 2002, vol. 42, no. 8, pp. 894–902.
Funding
The work was supported by the Directive no. 211 of the Government of Russian Federation, Contract no. 02.A03.21.0006, the State Assignment of the Ministry of Education and Science of Russia (project no. 11.1465.2014/K), and State Assignment of the Institute of Physics of Metals of the Ural Branch of the Russian Academy of Sciences, “Laser” topic.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by A. Muravev
About this article
Cite this article
Maisuradze, M.V., Yudin, Y.V. & Lebedev, D.I. Thermal Strengthening of Large Parts Made from High-Strength Sparingly Doped Steel in Air. Steel Transl. 50, 356–362 (2020). https://doi.org/10.3103/S0967091220050083
Received:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S0967091220050083