@article{ART002301701},
author={ 안현정 and 김준배 and 신현경 },
title={12 MW급 풍력발전기 블레이드의 초기 형상 설계},
journal={풍력에너지저널},
issn={2093-5099},
year={2017},
volume={8},
number={2},
pages={19-23},
doi={10.33519/kwea.2017.8.2.003},
url={http://dx.doi.org/10.33519/kwea.2017.8.2.003}

TY - JOUR
AU - 안현정
AU - 김준배
AU - 신현경
TI - 12 MW급 풍력발전기 블레이드의 초기 형상 설계
T2 - 풍력에너지저널
PY - 2017
VL - 8
IS - 2
PB - 한국풍력에너지학회
SP - 19-23
SN - 2093-5099
AB - Nowadays, interest in renewable energy is increasing. Electricity demand is steadily increasing due toindustrialization; however, it is not possible to continue to use nuclear power plants and coal-fired power plantsthat are vulnerable to earthquakes and the main cause of fine dust, respectively. Wind power generation is arepresentative renewable energy source that generates electricity using the kinetic energy of wind, and is alsoa representative countermeasure against climate change that does not emit greenhouse gases. In this study, a 12MW wind turbine blade was designed based on the NREL 5 MW standard wind turbine. Most of the bladeinformation was extended using a scale ratio, and other blade information was adjusted to its characteristics.
KW - 풍력발전기, 상사비, 최대출력계수, 날개끝단속도비, 비틀림각, FAST V8
DO - 10.33519/kwea.2017.8.2.003
UR - http://dx.doi.org/10.33519/kwea.2017.8.2.003
ER -

안현정 , 김준배 and 신현경 . 2017, “12 MW급 풍력발전기 블레이드의 초기 형상 설계”, 풍력에너지저널, vol. 8, no. 2, pp. 19-23. Available from: doi:10.33519/kwea.2017.8.2.003

안현정 김준배 et al. 신현경 “12 MW급 풍력발전기 블레이드의 초기 형상 설계” 풍력에너지저널 8.2 pp. 19-23 (2017): 19.

안현정 , 김준배 , 신현경 . 12 MW급 풍력발전기 블레이드의 초기 형상 설계 풍력에너지저널 [Internet]. 2017; 8( 2), : 19-23. Available from: doi:10.33519/kwea.2017.8.2.003

안현정 , 김준배 and 신현경 . “12 MW급 풍력발전기 블레이드의 초기 형상 설계” 풍력에너지저널 8, no.2 (2017): 19-23. doi: 10.33519/kwea.2017.8.2.003