초록

A wind tunnel test for the side-furling device that was used for a horizontal type small wind turbine to reducethe output power in a high wind speed condition was conducted in a 5 m × 3.75 m open-jet test section. Asimple experimental wind turbine model with a “MEXICO blade” and electric motor was used to simulate thesmall wind turbine system. The furling force of the tail was measured by a force sensor installed on the furlingarm and the yawing moment of the turbine was measured by a moment sensor installed on the turbine strut. The turbine power was calculated by using the torque of the rotating axis and the rotational speed of the blade. Force characteristics of the tail system were studied by changing the arm length, wind speed and flow direction. Moment characteristics of the nacelle and blade system were studied by changing the offset distance, wind speedand RPM. Moment equilibrium conditions for the typical wind speed were estimated from those test results andconfirmed by a fixed-tail-angle test. A free-tail-angle test was also conducted to verify the effect of theside-furling device in high wind speed conditions.

키워드

블레이드, 펄링, 풍동시험, 소형풍력발전기

참고문헌(5)open

  1. [학술지] 김정기 / 2010 / MW급PMSG형 풍력 터빈의 제어시스템 설계 / 풍력에너지저널 1 (1) : 44 ~ 50

  2. [학술지] Etienne A / 2010 / Analysis of the furling behavior of small wind turbines / Applied Energy 87 : 2278 ~ 2292

  3. [학술대회] 진영호 / 2015 / 소형풍력발전기 펄링에 관한 연구 / 태양에너지학회 춘계학술대회 : 25

  4. [보고서] J.G. Schepers / 2007 / Mexico, Model experiments in controlled conditions

  5. [학술지] 조태환 / 2013 / 한국항공우주연구원 중형아음속풍동에서 수행된 풍력발전기 블레이드 풍동시험 / 풍력에너지저널 4 (2) : 40 ~ 46