드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답

@article{ART002604579},
author={ 임채욱 and 최재석 },
title={드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답},
journal={풍력에너지저널},
issn={2093-5099},
year={2020},
volume={11},
number={2},
pages={22-29},
doi={10.33519/kwea.2020.11.2.003},
url={http://dx.doi.org/10.33519/kwea.2020.11.2.003}

TY - JOUR
AU - 임채욱
AU - 최재석
TI - 드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답
T2 - 풍력에너지저널
PY - 2020
VL - 11
IS - 2
PB - 한국풍력에너지학회
SP - 22-29
SN - 2093-5099
AB - It is meaningful to check power output response and load response together using the NREL 5 MW wind turbine, which represents typical onshore and offshore wind turbines. In this paper, the effect of the drive-train damper on shaft load reduction is verified by using the NREL 5 MW wind turbine model. A drive-train damper in the form of a band-pass filter, which is commonly used in industrial MW wind turbines, is applied. The wind turbine controller is mainly divided into a power controller and load controller. When the power controller and the drive-train damper are considered at the same time, the damage equivalent load of the drive-train shaft and power output responses according to the time constant of the first-order low pass filter are examined. In addition, the effects and limitations of the drive-train damper are investigated. The power output responses and damage equivalent loads are presented with practical results using commercially available DNV GL's Bladed software.
KW - 블레이디드, 드라이브-트레인 댐퍼, 등가피로하중, 축 진동, 시상수, 풍력터빈
DO - 10.33519/kwea.2020.11.2.003
UR - http://dx.doi.org/10.33519/kwea.2020.11.2.003
ER -

임채욱 and 최재석 (2020). 드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답. 풍력에너지저널, 11( 2), 22- 29.

임채욱 and 최재석 . 2020, “드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답”, 풍력에너지저널, vol. 11, no. 2, pp. 22-29. Available from: doi:10.33519/kwea.2020.11.2.003

임채욱 최재석 et al. “드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답” 풍력에너지저널 11.2 pp. 22-29 (2020): 22.

임채욱 , 최재석 . 드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답 풍력에너지저널 [Internet]. 2020; 11( 2), : 22-29. Available from: doi:10.33519/kwea.2020.11.2.003

임채욱 and 최재석 . “드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답” 풍력에너지저널 11, no.2 (2020): 22-29. doi: 10.33519/kwea.2020.11.2.003

홈 권호 목록 논문 목록 논문 상세

드라이브-트레인 댐퍼를 적용한 NREL 5 MW 풍력터빈의 응답

풍력에너지저널

약어 : -

2020, vol.11, no.2, pp.22 - 29

DOI : 10.33519/kwea.2020.11.2.003

발행기관 : 한국풍력에너지학회

연구분야 : 기타공학

임채욱¹ , 최재석²

¹한밭대학교

²한밭대학교

인용한 논문 수 : 1 서지 간략 보기

초록

It is meaningful to check power output response and load response together using the NREL 5 MW wind turbine, which represents typical onshore and offshore wind turbines. In this paper, the effect of the drive-train damper on shaft load reduction is verified by using the NREL 5 MW wind turbine model. A drive-train damper in the form of a band-pass filter, which is commonly used in industrial MW wind turbines, is applied. The wind turbine controller is mainly divided into a power controller and load controller. When the power controller and the drive-train damper are considered at the same time, the damage equivalent load of the drive-train shaft and power output responses according to the time constant of the first-order low pass filter are examined. In addition, the effects and limitations of the drive-train damper are investigated. The power output responses and damage equivalent loads are presented with practical results using commercially available DNV GL's Bladed software.

키워드

블레이디드, 드라이브-트레인 댐퍼, 등가피로하중, 축 진동, 시상수, 풍력터빈

참고문헌(13)

[학술지] 김현구 / 2017 / 전력통계정보시스템(EPSIS) 풍력발전자료에 의한 국내 풍력발전 현황 및 이용률 분석 / 풍력에너지저널 8 (2) : 24 ~ 30
[인터넷자료] / DHI Wind Power Brochure
[인터넷자료] / Unison Wind Energy Brochures
[인터넷자료] / Hyosung Wind Turbine
[학술지] 남윤수 / 2011 / MW급 풍력터빈의 출력 제어 / 대한기계학회논문집 A 35 (1) : 11 ~ 15
[학술지] 타이펑주 / 2011 / Study on the Aerodynamics and Control Characteristics of 5 MW Wind Turbine / 신재생에너지 7 (2) : 59 ~ 69
[학술지] 남윤수 / 2012 / NREL 5MW 풍력터빈의 제어시스템 설계 / 한국태양에너지학회 논문집 32 (5) : 31 ~ 40
[학술지] 김철진 / 2018 / 피치 루프 개별 게인 스케줄링 기법을 통한 타워 하중 저감 제어 / 풍력에너지저널 9 (3) : 25 ~ 32
[보고서] Jonkman, J. / 2009 / Definition of a 5-MW Reference Wind Turbine for Offshore System Development
[보고서] Lindenburg, C. / 2002 / Aeroelastic Modelling of the LMH64-5 Blade
[학술지] Bossanyi, E. A. / 2000 / The Design of Closed Loop Controllers for Wind Turbines / Wind Energy 3 : 149 ~ 163
[기타] / 2018 / Bladed User Manual Version 4.9 / DNV GL
[기타] / 2005 / IEC 61400-1, Third Edition, Wind Turbines –Part 1: Design Requirements