초록

A real time road slopes sensing system using acceleration sensor implemented in this study is able to sense the slope and risk conditions along expressways and highways in real time, to detect slope collapse and a dangerous situation on the basis of the sensing data, and thereby to notify the sensing system of the state in real time and give a warning to drivers on road to minimize damage. This study produced a sensor unit to detect the slope state along road and a control unit, and designed a photovoltaic unit to supply power in consideration of difficult power supply situation. To evaluate the performance of the implemented system, the sensor unit connected through RS-485 communication line was fixed at an experimental model slope. In the experiment, an impact was imposed on the sensor unit in various motion directions. As a result, the monitoring system displayed a sensor warning message when there was continuous oscillation more than 5 seconds or an inclination of more than 5 degrees, and displayed a rockfall detection message when there was a upper falling rock impact.

키워드

Slope, Real time, Acceleration sensor, Tilt, RS-485 communication

참고문헌(6)open

  1. [학술지] Jang Chang-Deok / 2016 / Analysis of domestic and foreign monitoring cases for mountainous disaster damage reduction / Journar of Disaster Prevention 18 (1)

  2. [학위논문] Kwak Sang-Woo / 2015 / Improvement of the management system in risk areas with highway landslide

  3. [학위논문] Kim Seung-Hyun / 2013 / Study on Behavior Characteristics and Systematic Maintenance of Road Slopes in Korea

  4. [학위논문] Yoo So-Wol / 2017 / The Design and Implementation of Slope Failure Monitoring System based on Sensor Network

  5. [학위논문] 김현동 / 2014 / RS-485 통신의 실용적 한계에 대한 고찰과 실증적 극복방안 연구

  6. [기타] Campbell, R. H. / 1975 / Soil slips, debris flows, and rainstorms in the Santa Monica Mountains and vicinity, Southern California, U.S. Geol. Surv. Prof. Pap., 851, 51p. Elsen, E