One of the important features of flanging process is elastic recovery during unloading leading to springback. The elastic recovery is associated with various tool and material parameters. It is difficult to analytically predict the elastic recovery accurately owing to the complex material deformation behavior. In this investigation, a commercially available Finite Element software is used for elasto-plastic analysis of flanging process. The springback is studied varying geometrical, material and friction parameters. The results of the simulation are validated with a few published experimental results.
Cite This Article
APA Style
Panthi, S.K., Ramakrishnan, N., Pathak, K.K., Chouhan, J.S. (2007). Prediction of springback in straight flanging using finite element method. Computers, Materials & Continua, 6(1), 13-20. https://doi.org/10.3970/cmc.2007.006.013
Vancouver Style
Panthi SK, Ramakrishnan N, Pathak KK, Chouhan JS. Prediction of springback in straight flanging using finite element method. Comput Mater Contin. 2007;6(1):13-20 https://doi.org/10.3970/cmc.2007.006.013
IEEE Style
S.K. Panthi, N. Ramakrishnan, K.K. Pathak, and J.S. Chouhan "Prediction of Springback in Straight Flanging using Finite Element Method," Comput. Mater. Contin., vol. 6, no. 1, pp. 13-20. 2007. https://doi.org/10.3970/cmc.2007.006.013
This work is licensed under a Creative Commons Attribution 4.0 International License , which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.