Analysis of Forces in Vibro-Impact and Hot Vibro-Impact Turning of Advanced Alloys

Riaz Muhammad; Agostino Maurotto; Anish Roy; Vadim Silberschmidt

doi:10.4028/www.scientific.net/AMM.70.315

Paper Titles

Finite Element Validation of the over-Coring Deep-Hole Drilling Technique
p.291

The Validation of Weld Residual Stresses for Use in Structural Integrity Assessment
p.297

Strain Evolution during Lap Shear Testing of SnCu Solder
p.303

Model Updating of an Enclosure Using Imaginary Elements
p.309

Analysis of Forces in Vibro-Impact and Hot Vibro-Impact Turning of Advanced Alloys
p.315

Measurement of Tangential Contact Stiffness in Frictional Contacts: The Effect of Normal Pressure
p.321

Synchronization between Driving and Illumination Signals in a High Frequency Stroboscopic Imaging System
p.327

Vibratory Analysis of Turning Process
p.333

A Strategy for Delivering High Torsionality in Longitudinal-Torsional Ultrasonic Devices
p.339

HomeApplied Mechanics and MaterialsApplied Mechanics and Materials Vol. 70Analysis of Forces in Vibro-Impact and Hot...

Analysis of Forces in Vibro-Impact and Hot Vibro-Impact Turning of Advanced Alloys

Abstract:

Analysis of the cutting process in machining of advanced alloys, which are typically difficult-to-machine materials, is a challenge that needs to be addressed. In a machining operation, cutting forces causes severe deformations in the proximity of the cutting edge, producing high stresses, strain, strain-rates and temperatures in the workpiece that ultimately affect the quality of the machined surface. In the present work, cutting forces generated in a vibro-impact and hot vibro-impact machining process of Ti-based alloy, using an in-house Ultrasonically Assisted Turning (UAT) setup, are studied. A three-dimensional, thermo-mechanically coupled, finite element model was developed to study the thermal and mechanical processes in the cutting zone for the various machining processes. Several advantages of ultrasonically assisted turning and hot ultrasonically assisted turning are demonstrated when compared to conventional turning.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Applied Mechanics and Materials (Volume 70)

Pages:

315-320

DOI:

https://doi.org/10.4028/www.scientific.net/AMM.70.315

Citation:

Cite this paper

Online since:

August 2011

Authors:

Riaz Muhammad, Agostino Maurotto, Anish Roy, Vadim Silberschmidt

Keywords:

Cutting Force, Finite Element, Ti Alloys, Ultrasonically Assisted Turning (UAT)

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] N. Ahmed, A.V, Mitrofanov, V.I. Babitsky, V.V. Silberschmidt: Applied Mechanics & Materials, Vol. 5-6 (2006), pp.351-358.

Google Scholar

[2] N. Ahmed, A.V, Mitrofanov, V.I. Babitsky, V.V. Silberschmidt: Computational Materials Science, Vol. 39 (2007), pp.149-154.

DOI: 10.1016/j.commatsci.2005.12.045

Google Scholar

[3] N. Ahmed, A.V, Mitrofanov, V.I. Babitsky, V.V. Silberschmidt: Journal of Sound and Vibration, Vol. 308 (2007), pp.845-854.

DOI: 10.1016/j.jsv.2007.04.003

Google Scholar

[4] A.V. Mitrofanov, V.I, Babitsky, V.V. Silberschmidt: Computational Materials Science, Vol. 32 (2005), pp.463-471.

DOI: 10.1016/j.commatsci.2004.09.019

Google Scholar

[5] N. Ahmed, A.V, Mitrofanov, V.I. Babitsky, V.V. Silberschmidt: Materail Processing Technology, Vol. 162-163 (2005), pp.649-654.

DOI: 10.1016/j.jmatprotec.2005.02.170

Google Scholar

[6] MSC.Marc User's Guide Version 2010. MSC Software Corporation LA. In.

Google Scholar

[7] Z. Li, J, Lambros: Computational Science Technology, Vol. 59 (1999), pp.1097-1107.

Google Scholar

[8] M. Demiral, A, Roy, V.V. Silberschmidt: Computational Materials and Continua (2010) Submitted.

Google Scholar

[9] R. Muhammad, N. Ahmed, M. Demiral, A. Roy, V.V. Silberschmidt: Advanced Materials Research. Vol. 223 (2011), pp.30-36.

Google Scholar

[10] R. Muhammad, N. Ahmed, Y.M. Shariff, V.V. Silberschmidt: Advanced Materials Research. Vol. 223 (2011), pp.240-246.

Google Scholar

[11] M. Baker, J, Rosler, C. Siemers: Computers & Structures, Vol. 80 (2002), pp.495-513.

Google Scholar

[12] H. Fassi, L, Bousschine, A. chaaba, Material Processing Technology 2003, Vol. 141 (2003), pp.181-188.

Google Scholar

[13] G. Shi, X, Deng, C. Shet: Finite Elements in Analysis & Design, Vol. 38 (2002), pp.863-883.

Google Scholar