The Effect of Nitrogen on Flame Characteristics in Biogas External Premixed Combustion

Article Preview

Abstract:

Biogas contains more than 50% methane (CH4), is a renewable and eco-friendly fuel produced by bacterial action. Not only is biogas flammable but it also contains inhibitors like carbon dioxide and nitrogen, as well as small amounts of H2, O2, H2S and others. Several associated studies have been conducted in order to examine biogas combustion characteristics in external combustion and flame angle, flame height and dimensionless flame height are the important characteristics in external premixed combustion. This research’s aims were to discover the influences of N2 as it is the second most prevalent inhibitor in biogas by burning stoichiometric fuel mixtures (CH4 and N2 (0%-50% of fuel)) and oxygen in an experimental external premixed combustion burner whose nozzle tip diameter was 5 mm. The burner was connected to a hose from the oxygen tank and another hose from the fuel tank. Two regulators and flowmeters were placed on each tank to monitor the flow supplied to the mixer and burner. The valves were used to stop or open the fluid supply. The outcome flame propagation is then recorded by a high speed camera and then processed through a computer system. The results indicate that N2 influenced the flame angle, flame height and dimensionless flame height. The higher the N2 content inside the fuel, the shorter the flame height and the lower the dimensionless flame height. Moreover, increasing the N2 content created larger the flame angle.

You might also be interested in these eBooks

Info:

Periodical:

Pages:

265-270

Citation:

Online since:

June 2016

Export:

Price:

[1] H. Kobayashi, H. Hagiwara, H. Kaneko, Y. Ogami, Effects of CO2 dilution on turbulent premixed flames at high pressure and high temperature, Proceedings of the Combustion Institute. 31 (2007) 1451–1458.

DOI: 10.1016/j.proci.2006.07.159

Google Scholar

[2] H. Kobayashi, K. Seyama, H. Hagiwara, Y. Ogami, Burning velocity correlation of methane/air turbulent premixed flames at high temperature and high pressure, Proceedings of the Combustion Institute. 30 (2005) 827–834.

DOI: 10.1016/j.proci.2004.08.098

Google Scholar

[3] H. Kobayashi, Experimental study of high pressure turbulent premixed flames, Experimental Thermal and Fluid Science. 26 (2002) 375-387.

DOI: 10.1016/s0894-1777(02)00149-8

Google Scholar

[4] X. Chen, Y. Zhang, Y. Zhang, Effects of CH4-Air ratios on gas explosion flame microstructure and propagation behaviour, Energies. 5 (2012) 4132-4146.

DOI: 10.3390/en5104132

Google Scholar

[5] C. César, A. Amell, H. Burbano, Laminar burning velocity of natural gas/syngas-air mixture, Dyna. 80 (2013) 136-143.

Google Scholar

[6] H. Saroso, I.N.G. Wardana, R. Soenoko, N. Hamidi, Burning characteristics of coconut vapor-air mixtures at premixed combustion, Advanced Studies in Theoretical Physics. 7 (2013) 941.

DOI: 10.12988/astp.2013.3884

Google Scholar

[7] P. Muthukumar, P. Anand, P. Sachdeva, Performance analysis of porous radiant burner used in LPG cooking stove, International Journal of Energy and Environment. 2 (2011) 367-374.

Google Scholar

[8] Y. Liang, W. Zeng, E. Hu, Experimental study of the effect of nitrogen addition on gas explotion, Journal of Prevention in The Process Industries. 26 (2013) 1-9.

Google Scholar

[9] B. Kashir et al., Experimental study on propane/oxygen and natural gas/oxygen laminar diffusion flames in diluting and preheating conditions, Thermal Science. 16 (2012) 1043-1053.

DOI: 10.2298/tsci110524122k

Google Scholar

[10] F. Migliorini, S. De Iuliis, F. Cignoli, G. Zizak, How flat, is the rich premixed flame produced by your McKenna burner, Combustion and Flame. 153 (2008) 384–393.

DOI: 10.1016/j.combustflame.2008.01.007

Google Scholar

[11] C.Y. Wu, K.H. Chen, S.Y. Yang, Experimental study of porous metal burners for domestic stove applications, Energy Conversion and Management. 77 (2014) 380-388.

DOI: 10.1016/j.enconman.2013.10.002

Google Scholar

[12] S. Osami, K. Sakai, Flame length and width produced by ejected propane gas fuel from a pipe, Fire Science and Technology. 1 (1997) 55-63.

DOI: 10.3210/fst.17.55

Google Scholar

[13] W. Anggono, I.N.G. Wardana, M. Lawes, K.J. Hughes, S. Wahyudi, N. Hamidi, Laminar burning characteristics of biogas-air mixtures in spark ignited premix combustion, Journal of Applied Sciences Research. 8 (2012) 4126-4132.

DOI: 10.4028/www.scientific.net/amm.376.79

Google Scholar

[14] W. Anggono, I.N.G. Wardana, M. Lawes, K.J. Hughes, S. Wahyudi, N. Hamidi, A. Hayakawa, Laminar burning velocity and flammability characteristics of biogas-air mixtures in spark ignited premix combustion, Journal of Physics Conference Series. 423 (2013).

DOI: 10.1088/1742-6596/423/1/012015

Google Scholar

[15] W. Anggono, I.N.G. Wardana, N. Lawes, K.J. Hughes, S. Wahyudi, N. Hamidi, Laminar burning velocity and flammability characteristics of biogas in spark ignited premix combustion at reduced pressure, Applied Mechanics and Materials. 376 (2013).

DOI: 10.4028/www.scientific.net/amm.376.79

Google Scholar

[16] W. Anggono, F.D. Suprianto, T.P. Wijaya, M.S. Tanoto, Behavior of flame propagation in biogas spark ignited premix combustion with carbon dioxide inhibitor, Advanced Materials Research. 1044-1045 (2014) 251-254.

DOI: 10.4028/www.scientific.net/amr.1044-1045.251

Google Scholar

[17] W. Anggono, I.N.G. Wardana, M. Lawes, K.J. Hughes, Effect of Inhibitors on biogas laminar burning velocity and flammability limits in spark ignited premix combustion, International Journal of Engineering and Technology. 5 (2014) 4980-4987.

DOI: 10.4028/www.scientific.net/amm.376.79

Google Scholar

[18] J.J. Alston, N.A. Dembsey, Evaluation of dimensionless flame height parameters to account for fuel source effects, Fire Safety Science-Proceedings of the Seventh International Symposium. 1 (2003) 569-580.

DOI: 10.3801/iafss.fss.7-569

Google Scholar