Paper Titles

Research and Application Status of Arc Welding Heat Source Model for T-Joint Numerical Simulation
p.1423

The Steel Joint Life of the Single-Wheeled Cycle Using FEM Analysis
p.1427

A Heat Transfer and Solidification Model of Continuous Cast
p.1431

Effect of Chromium Nitride on Microstructure and Properties of Fe-Based Coating by Laser Cladding
p.1435

Review of Materials and Process Modeling Techniques for Creep Age Forming
p.1439

Comparable Study on Water Cavitation Peening and Traditional Shot Peening of Almen Strips
p.1446

Influences of Variable Friction Coefficient on the Hot Formability of Ultra High Strength Steel Sheet
p.1450

Finite Element Thermal-Mechanical Coupled Analysis of Strand Bulging Deformation in Continuous Casting
p.1456

Effects of Heat Treatment on the Interfacial Structure of Nickel-Aluminum Coating Composites
p.1462

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 154-155Review of Materials and Process Modeling...

Review of Materials and Process Modeling Techniques for Creep Age Forming

Article Preview

Abstract:

The Creep Age Forming (CAF) technique has been recently developed and used to manufacture aircraft and aerospace panel components with improved mechanical properties, increased shape stability and reduced fabrication cost. Precipitation hardening, stress relaxation and creep phenomena take place synchronously in the forming process. Significant research work has been carried out over the last two decades and the applications have been expanded. This paper reviews the most recent development of materials and process modeling techniques for this new forming process. Some challenges for future modeling investigation about the novel process are also discussed.

You might also be interested in these eBooks

Materials Processing Technologies

Info:

Periodical:

Advanced Materials Research (Volumes 154-155)

Pages:

1439-1445

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.154-155.1439

Citation:

Cite this paper

Online since:

October 2010

Authors:

Li Hua Zhan, Jian Guo Lin, Daniel S. Balint

Keywords:

Aluminium Alloy, Creep, Creep Age Forming, Materials Modelling, Precipitation Hardening, Process Modeling, Stress Relaxation

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

[1] M. C. Holman: Journal of Mechanical Working Technology, Vol. 20 (1989), p.477-488l. 83-87 (1992), p.119.

[2] Z.L. Kowalewski, D.R. Hayhurst, B.F. Dyson: J. Strain Analysis, Vol. 29 (1994), pp.309-316.

[3] B. Li, J. Lin, X. Yao: Int. J Mech. Sciences, Vol. 44 (2002), pp.987-1002.

[4] Q. Xu, S. Barrans: JSME International Journal. Series A, Mechanics and Material Engineering, Vol. 46(1) (2003), pp.51-59.

[5] P. Xue, T.X. Yu, E. Chu: Int. J. Mech. Sci., Vol. 43 (2001a), p.1914–(1983).

[6] N. Asnaﬁ: Int. J. Mech. Sci., Vol. 43(1) (2001), pp.5-37.

[7] M. Sallah, J. Peddieson, S. Foroudastan: Journal of Materials Processing Technology, Vol. 28 (1991), pp.211-219.

DOI: 10.1016/0924-0136(91)90220-9

[8] K. Idem, J. Peddieson: Journal of Manufacturing Science and Engineering, Vol. 127 (2005), pp.165-172.

[9] D. Guines, A. Gavrus, E. Ragneau: Int J. Mater. Form, Suppl 1 (2008), p.1071 –1074.

[10] M.J. Jackson, J. Peddieson, S. Foroudastan: Proc. ImechE Vol. 219 Part L:J. Materials: Design and Applications (2005), pp.17-24.

[11] K. C. Ho, J. Lin, T. A. Dean: International Journal of Plasticity, Vol. 20 (2004), p.733–751.

[12] L. Huang, M. Wan, S. Huang: Aviation manufacturing technique, Supplement (2007), pp.484-487 (In Chinese).

[13] S. Huang, Y.S. Zeng, X. Huang: Journal of Plasticity Engineering, Vol. 16(4) (2009), pp.129-133.

[14] K.C. Ho, J. Lin, T.A. Dean: Journal of Materials Processing Technology, Vol. 153–154 (2004), p.122–127.

[15] P. -P. Jeunechamps, K.C. Ho, J. Lin, J. -P. Ponthot, T.A. Dean: International Journal of Mechanical Sciences, Vol. 48 (2006), p.621–629.

DOI: 10.1016/j.ijmecsci.2006.01.005

[16] S. P. Narimetia, J. Peddieson, Jr., G. R. Buchanan, S. Foroudastan: Transactions of the ASME, Vol. 120 (1998), pp.183-190.

[17] J. Lin, K.C. Ho, T.A. Dean: International Journal of Machine Tools & Manufacture, Vol. 46 (2006), p.1266–1270.

[18] A.W. Zhu, E.A. Starke, Jr. : Acta mater., Vol. 49 (2001), p.2285–2295.

[19] D. Bakavos P.B. Prangnell, R. Dif: Proceedings of the 9th international conference on aluminum alloy (ICAA9), Brisbane, Australia (2004), pp.124-131.