Synthesis and Properties of New Poly( Amide-Imide)s Based on Imide Dicarboxylic Acid

Sheng Chen; Qing Kang Zheng; Zhen Bao Li; Xin Lei Wang; Jian Wu Lan

doi:10.4028/www.scientific.net/AMR.332-334.1722

Paper Titles

Study on the Relationships between Offset Ink Tack Value and its Viscosity, the Separation Velocity
p.1704

Prediction of Lifetime of Nylon 66 as an Airbag Material
p.1709

Synthesis and Properties of a Novel Conducting Hydrogel with Enhanced Mechanical Properties
p.1714

Study on Antheraea Pernyi Silk Fibroin Porous Materials
p.1718

Synthesis and Properties of New Poly( Amide-Imide)s Based on Imide Dicarboxylic Acid
p.1722

Property and Application of Rabbit Protein Powder
p.1727

Discuss on Design of Antibacterial Woven Fabrics Involving Silver-Coated Fibers
p.1731

A New Ultraviolet Filter: Growth and Characterization of Sodium Nickel Sulfate Tetrahydrate Single Crystal
p.1735

Preparation and Characterization of Chitosan/poly( Vinyl Alcohol) Composite Packaging Films
p.1739

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 332-334Synthesis and Properties of New Poly(...

Synthesis and Properties of New Poly( Amide-Imide)s Based on Imide Dicarboxylic Acid

Abstract:

Two kinds of imide dicarboxylic acid monomers, 4,4'-bis(trimellitimido) diphenyl ether Ⅰ and p-trimellitimido-benzoic acid Ⅱ were successfully synthesized from 4,4'-diaminodiphenyl ether and p-aminobenzoic acid with trimellitic anhydride respectively.and used to synthesize a series of new aromatic poly(amide-imide)s (PAIs) by the tri-phenyl phosphite-activated polycondensation method. The preparation of PAIs was carried out using triphenyl phosphate and pyridine symtem. The PAIs had inherent viscosities of 0.55–1.46 dL g-1. PAI films were obtained by casting their N-Methyl-2-pyrrolidone (NMP) solution. Their cast films had tensile strengths ranging from 37.4 to 83.9 MPa. The glass-transition temperatures (measured by differential scanning calorimetry) were in the range of 265-310°C. According to thermogravimetric analysis, the polymers were fairly stable up to temperature around 420°C, and 10% weight losses in the temperature range of 474-550°C in nitrogen, that showed good thermal stabilities of these polymers.