[1]
N.V. David, X.L. Gao, and J.Q. Zheng: Applied Mechanics Reviews vol. 62 no. 5 p.050802, (2009).
Google Scholar
[2]
K. Bilisik: Textile Research Journal vol. 81 no. 5 pp.520-537, (2010).
Google Scholar
[3]
A.K. Bilisik and Y. Turhan: Textile Research Journal vol. 79 no. 14 pp.1331-1343, (2009).
Google Scholar
[4]
P. Wambua, B. Vangrimde, S. Lomov, and I. Verpoest: Composite Structures vol. 77 no. 2 pp.232-240, (2007).
DOI: 10.1016/j.compstruct.2005.07.006
Google Scholar
[5]
A. Tabiei and G. Nilakantan: Applied Mechanics Reviews vol. 61 no. 1 p.010801, (2008).
Google Scholar
[6]
M. Colakoglu, O. Soykasap, and T. Özek: Applied Composite Materials vol. 14 no. 1 pp.47-58, (2007).
Google Scholar
[7]
M.S. Risby, S.V. Wong, A.M. S. Hamouda, A.R. Khairul, and M. Elsadig: Defense Science Journal vol. 58 no. 2 pp.248-263, (2008).
Google Scholar
[8]
National Institute of Justice Standard-0101. 04 (2001).
Google Scholar
[9]
B.L. Lee, T.F. Walsh, S.T. Won, H.M. Patts, J.W. Song, and A.H. Mayer: Journal of Composite Materials vol. 35 no. 18 pp.1605-1633, (2001).
Google Scholar
[10]
R. Clegg, C. Hayhurst, J. Leahy, and M. Deutekom: 18th Int Symposium & Exhibition on Ballistics San Antonio, Texas USA, November 15-19 (1999).
Google Scholar
[11]
H. B Kocer: Masters Thesis, Auburn University, Alabama, (2007).
Google Scholar
[12]
H.L. Gower, D.S. Cronin, and A. Plumtree: Int Journal of Impact Engineering vol. 35 no. 9 pp.1000-1008, (2008).
Google Scholar
[13]
A. R Azrin Hani, A. Roslan, J. Mariatti, R. Mohd Nazrul, and A. Saparudin: Advanced Materials Research vol. 277 pp.36-42, (2011).
Google Scholar
[14]
F.J. Guild, M. El-habti, and P.J. Hogg: 16th Int Conference on Composite Materials pp.1-4, (2007).
Google Scholar
[15]
N. K. Naik: Proc. of the Int. Conf. on Aerospace Science & Tech., Bangalore, 26-28 June (2008).
Google Scholar
[16]
Y.C. Wong, D. Ruan, M.L. Sesso, and S.Y. Kim: Incorporating Sustainable Practice in Mechanics of Structures and Materials pp.615-618, (2011).
Google Scholar
[17]
A. H Ali, Y. L. Nimir, and R. J. Mustafa: Jordan Journal of Mechanical and Industrial Engineering vol. 4 no. 5 pp.605-614, (2010).
Google Scholar
[18]
M. Grujicic, W.C. Bell, S.B. Biggers, K.L. Koudela, J.F. Tarter, and B. A Cheeseman: Part L: Journal of Materials: Design and Applications vol. 222 no. 1 pp.15-28, (2008).
Google Scholar
[19]
M. Grujicic, W. Bell, L. Thompson, K. Koudela, and B. Cheeseman: Materials Science and Engineering: A vol. 479 no. 1-2 pp.10-22, (2008).
Google Scholar
[20]
K. Mcdaniels, R J. Downs, H. Meldner, C. Beach, and C. Adams: Cubic Tech Corp. pp.1-9, (2009).
Google Scholar
[21]
M. Karahan: Textile Research Journal vol. 78 no. 8 pp.718-730, (2008).
Google Scholar
[22]
J. Heinecke: Law Enforcement Technology Magazine, (2007).
Google Scholar
[23]
E. Thostenson, C. Li, and T. Chou: Composites Science and Technology vol. 65 no. 3-4 pp.491-516, (2005).
Google Scholar
[24]
Y.S. Lee, E.D. Wetzel, and N.J. Wagner: Journal of Materials Science vol. 8 pp.2825-2833, (2003).
Google Scholar
[25]
M.R. Ahmad, W.Y. Wan Ahmad, J. Salleh, and A. Samsuri: Polymer Journal vol. 2 no. 1 pp.39-51, (2007).
Google Scholar
[26]
V. Mcconnell: Reinforced Plastics vol. 50 no. 11 pp.20-25, (2006).
Google Scholar
[27]
K. Mylvaganam and L.C. Zhang: Nanotechnology vol. 18 no. 47 p.475701, (2007).
Google Scholar
[28]
A.J. Kinloch, R. D. Mohammed, A.C. Taylor, C. Eger, S. Sprenger, and D. Egan: Journal of Materials Science vol. 40 no. 18 pp.5083-5086, (2005).
DOI: 10.1007/s10853-005-1716-2
Google Scholar