Sponsors, Committees, Preface
Investigation of Curing Process on Melt Spun Polymethylsilsesquioxane Fiber as Precursor for Silicon Oxycarbide Fibers
p.1
p.1
Synthesis of SiC Based Fibers with Continuous Pore Structure by Melt- Spinning and Controlled Curing Method
p.5
p.5
Effect of Nd2O3 and Sm2O3 on the Microstructure and Electrical Properties of WO3 Capacitor-Varistor Ceramics
p.9
p.9
The Effect of Particle Morphology and Particle Size Distribution on the Property of Slip Casting SiC
p.13
p.13
Preparation and Thermoelectric Properties of Bi-Doped Mg2Si Nanocomposites
p.17
p.17
The Effect of Water-Soluble Plasticizer on Barren Raw Material Hard Plastic Extruding Course
p.21
p.21
Stoichiometric Controlling of Spark Plasma Sintered Boron-Carbon Ceramics
p.25
p.25
Optimal Design for Ceramic Radomes with A-Sandwich Structure
p.29
p.29
Investigation of Curing Process on Melt Spun Polymethylsilsesquioxane Fiber as Precursor for Silicon Oxycarbide Fibers
Abstract:
Polymethylsilsesquioxane (PMSQ) fiber was exposed to metal chloride vapors in a controlled atmosphere or electron beam irradiation in air to promote the curing process. The cured fibers were pyrolyzed at 1273K to compare the efficiency of individual curing method. The cured fibers were investigated by FT-IR, an optical microscope and TG analysis. In the case of successful curing, averaged diameter and tensile strength were analyzed on the obtained Si-O-C fibers.
You might also be interested in these eBooks
Info:
Periodical:
Advanced Materials Research (Volume 66)
Pages:
1-4
Citation:
Online since:
April 2009
Permissions: