Paper Titles

Development and Application of a Micro-Honing-Tool
p.189

Investigation of the Wear of the Pad Conditioner in Chemical Mechanical Polishing Process
p.195

Dressing Behaviors of PCD Conditioners on CMP Polishing Pads
p.201

A Study of Thermal-Chemical Polishing for CVD Diamond Thin Films
p.207

A Briefing on the Manufacture of Hip Joint Prostheses
p.212

The Computer-Controlled Chemical Polishing Techniques for Precision Optics
p.217

Anisotropic Analysis on Processed Surface of KDP Single Crystals
p.223

Influence of Abrasive on Planarization Polishing with the Tiny-Grinding Wheel Cluster Based on the Magnetorheological Effect
p.229

Experimental Study on Polishing Characteristics of Ultrasonic- Magnetorheological Compound Finishing
p.235

HomeAdvanced Materials ResearchAdvanced Materials Research Vols. 76-78A Briefing on the Manufacture of Hip Joint...

A Briefing on the Manufacture of Hip Joint Prostheses

Article Preview

Abstract:

To produce lifelong, harmless hip joint prostheses, considerable cross-disciplinary studies have been carried out. The research includes adaptability and sustainability of artificial materials to human body, selection of materials, precision fabrication and efficient replacement operation. This paper provides a brief review of some of these key aspects with some details in abrasive polishing.

You might also be interested in these eBooks

Advances in Abrasive Technology XII

Info:

Periodical:

Advanced Materials Research (Volumes 76-78)

Pages:

212-216

DOI:

https://doi.org/10.4028/www.scientific.net/AMR.76-78.212

Citation:

Cite this paper

Online since:

June 2009

Authors:

Liang Chi Zhang, E.C.S. Kiat, Alokesh Pramanik

Keywords:

Design, Hip Joint Prosthesis, Manufacture, Polishing

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

[1] P. Charlton, L. Blunt: Wear Vol. 264 (2008), p.399.

[2] http: /www. cdc. gov/arthritis/ data_statistics/national_data_nhis. htm.

[3] http: /www. arthritiscare. org. uk/PublicationsandResources/Arthritisbasics /Arthritisstatistics.

[4] http: /www. nevdgp. org. au/info/ArthritisF/ArthritisCosts. pdf.

[5] H. Malchau, P. Herberts, L. Ahnfeit: Acta Orthop Scand Vol. 64 (5) (1993), p.497.

[6] O.A. Nercessian, et al: J. Arthroplasty Vol. 20(2) (2005), p.162.

[7] M.M. Mullins, et al: J. Arthroplasty Vol. 22(6)(2007), p.833.

[8] A. Gandhe, and M. Grover: Current Orthop. Vol. 22 (2008), p.155.

[9] J. Livermore, D. Ilstrup, and F. Morrey: J Bone Joint Surg. Vol. 72(4) (1990), p.518.

[10] JM Kabo et al.: J. Bone Joint Surg. Vol. 75(2)(1993), p.254.

[11] BF Morrey and D. Ilstrup: J. Bone Joint Surg. Vol. 71(1)(1989), p.50.

[12] D. Kluess, et al.: Med. Eng. Phys. Vol. 29(4)(2007), p.471.

[13] A. Reinhardt, et al.: J. Compos. Mater. Vol. 33(9)(1999), p.870.

[14] http: /www. healthpages. org.

[15] S.J. Mulholland and U.R.S.P. Wyss: Int. J. Rehabil. Res. Vol. 24(3) (2001), p.191.

[16] G. Bergmann, et al.: J. Biomech. Vol. 34(7) (2001), p.859.

[17] G. Bergmann, F. Graichen and A. Rohlmann: J. Biomech. Vol. 26(8)(1993), p.969.

[18] J.P. Paul: Proce of the Royal Society of London. Biological Scie Vol. 192(1107) (1976), p.172.

[19] B.J. McGrory, et al.: J. Bone Joint Surg. British Volume Vol. 77(6) (1995), p.869.

[20] A.Z. Senalp, O. Kayabasi and H. Kurtaran: Mater. Design Vol. 28(5) (2007), p.1583.

[21] H.A. McKellop et al.: J. Ame. Aca. Ortho. Surg. Vol. 16 (2008), p.119.

[22] V. Saikko: J. Biomed. Mater. Res. Vol. 41(1)(1998), p.64.

[23] VA González-Mora et al.: Mater. Sci. Eng. C Vol. 29(1)(2009), p.158.

[24] C.C. Hu, et al.: Mater. Sci. Eng. C Vol. 17(1-2) (2001), p.18.

[25] J. Davidson, S. Gir and J.P. Paul: J. Biomed. Mater. Res. Vol. 22(1988), p.309.

[26] M. Jasty, et al.: J. Bone & Joint Surgery, British Vol. 73(4) (1991), p.558.

[27] J.P. Hung, et al.: Comput. Method. Program. Biomed. 76(2) (2004), p.113.

[28] J.R.T. Jeffers, et al.: J. Biomech. Vol. 40(7)(2007), p.1533.

[29] D. Bennett, et al.: Proce of the 22nd Annual International Conference of the IEEE. Vol. 22000.

[30] O. Calonius and V. Saikko: Acta Polytech. Vol. 43(4)(2003), p.54.

[31] J. Breme, et al.: Handbook of Biomaterial Properties. Kluwer Academic Publishers, (1998), p.135.

[32] M. Dietrich: Proceedings 10th International BIOLOX Symposium, Springer, Darmstadt, (2005), p.173.

[33] C.N. Ernsberger: European patent-EP 1 905 387 A1. https: /publications. europeanpatent office. org/PublicationServer/getpdf. jsp?cc=EP&pn=1905387&ki=A1 (2008).

[34] M. Semlitsch, C.H. Winterthur: United States Patent 6126695 (2000).

[35] F. Lin and T. Lu: Proceedings. International Conference on Intelligent Mechatronics and Automation (2004), p.980.

[36] http: /www. faqs. org/patents/app/20080215158.

[37] http: /www. wipo. int/ pctdb/en/wo. jsp?wo=2002004696, (2002).

[38] http: /www. lapmaster. co. uk /machinery/lapping-polishing machinery/spherical/default. html.

[39] J. Sun, L.C. Zhang, Y. -W. Mai, J.A. Gal, M. Hogg, S. Payor: J. Mater. Process. Technol. Vol. 122 (2000), p.134.

[40] J. Sun, L.C. Zhang, Y.W. Mai, J.A. Gal, M. Hogg and S. Payor: J. Mater. Process. Technol. Vol. 103 (2000), p.236.

[41] E.C.S. Kiat: Internal Project Report, School of Aerospace, Mechanical & Mechatronic Engineering, The University of Sydney, Australia (2009).

[42] H.F. Li, R.H. Bao, L.C. Zhang: Adv. Mater. Res. (2009) under review.