[1]
B.S. Yilbas, A.Z. Sahin, N. Kahraman, A.Z. Al-Garni, Friction welding of Steel-Al and Al-Cu materials, J. Mater. Process. Technol. 49 (1995) 431-443.
DOI: 10.1016/0924-0136(94)01349-6
Google Scholar
[2]
K. Bhanumurthy, G.B. Kale, Reactive diffusion between titanium and stainless steel, J. Mater. Sci. Lett. 12 (1993) 1879-1881.
DOI: 10.1007/bf00540018
Google Scholar
[3]
M. Ghosh, S. Chatterjee, Diffusion bonded transition joints of titanium-stainless steel with improved properties, Mater. Sci. Eng. A. 358 (2003) 152-158.
DOI: 10.1016/s0921-5093(03)00298-3
Google Scholar
[4]
M. Ghosh, S. Das, P.S. Banarjee, S. Chatterjee, Variation in the reaction zone and its effects on the strength of diffusion bonded titanium-stainless steel couple, Mater. Sci. Eng. A. 390 (2005) 217-226.
DOI: 10.1016/j.msea.2004.08.039
Google Scholar
[5]
S.A.A. Akbari Mousavi, P. Farhadi Sartangi, Experimental investigation of explosive welding of cp-titanium/AISI 304 stainless steel, Mater. Des. 30 (2009) 459-468.
DOI: 10.1016/j.matdes.2008.06.016
Google Scholar
[6]
B. Kurt, N. Orhan, E. Evin, A. Calik, Diffusion bonding between Ti-6Al-4V alloy and ferritic stainless steel, Mater. Lett. 61 (2007) 1747-1750.
DOI: 10.1016/j.matlet.2006.07.123
Google Scholar
[7]
A. Shafiei, P. Abachi, K. Dehghani, K. Pourazarang, On the formation of intermetallics during the furnace brazing of pure titanium to 304 stainless steel using Ag (30-50%)-Cu filler metals, Mater. Manuf. Process. 25 (2010) 1333-1340.
DOI: 10.1080/10426914.2010.523911
Google Scholar
[8]
S.A.A. Akbari Mousavi, M. Goharikia, Investigations on the mechanical properties and microstructure of dissimilar cp-titanium and AISI 316L austenitic stainless steel continuous friction welds, Mater. Des. 32 (2011) 3066-3075.
DOI: 10.1016/j.matdes.2010.12.057
Google Scholar
[9]
M. Fazel-Najafabadi, S.F. Kashani-Bozorg, A. Zarei-Hanzaki, Dissimilar lap joining of 304 stainless steel to CP-Ti employing friction stir welding, Mater. Des. 32 (2011) 1824-1832.
DOI: 10.1016/j.matdes.2010.12.026
Google Scholar
[10]
M. Ashfaq, K. Prasad Rao, H. Khalid Rafi, B.S. Murty, H.C. Dey, A.K. Bhaduri, Friction welding of titanium to 304L stainless steel using interlayers, Pract. Metallogr. 48 (2011) 188-207.
DOI: 10.3139/147.110101
Google Scholar
[11]
Murali Mohan Cheepu, V. Muthupandi, S. Loganathan, Friction welding of titanium to 304 stainless steel with electroplated nickel interlayer, Mater. Sci. Forum. 710 (2012) 620-625.
DOI: 10.4028/www.scientific.net/msf.710.620
Google Scholar
[12]
S. Kundu, M. Ghosh, S. Chatterjee, Reactive diffusion bonding between commercially pure titanium and 304 stainless steel using nickel interlayer, ISIJ Int. 44 (2004) 1882-1887.
DOI: 10.2355/isijinternational.44.1882
Google Scholar
[13]
A. Fuji, Y. Horiuchi, K. Yamamoto, Friction welding of pure titanium and pure nickel, Sci. Technol. Weld. Join. 10 (2005) 287-294.
DOI: 10.1179/174329305x40598
Google Scholar
[14]
J.C. Yan, D.S. Zhao, C.W. Wang, L.Y. Wang, Y. Wang, S.Q. Yang, Vacuum hot roll bonding of titanium alloy and stainless steel using nickel interlayer, Mater. Sci. Technol. 25 (2009) 914-918.
DOI: 10.1179/174328408x365766
Google Scholar
[15]
S. Kundu, S. Chatterjee, D. Olson, B. Mishra, Effects of intermetallic phases on the bond strength of diffusion-bonded joints between titanium and 304 stainless steel using nickel interlayer, Metall. Mater. Trans. A. 38 (2007) 2053-(2060).
DOI: 10.1007/s11661-007-9273-8
Google Scholar