[1]
A.B.M.A. Asad, M. Takeshi Masaki, M. Rahman, H.S. Lim, and Y.S. Wong, Tool based micromachining, Journal of Materials Processing Technology, 192-193 (2007) 204-211.
DOI: 10.1016/j.jmatprotec.2007.04.038
Google Scholar
[2]
T. Masuzawa and H.K. Tonshoff, Three dimensional micromachining by machine tool, Annals of CIRP, 46 (1997) 621-628.
DOI: 10.1016/s0007-8506(07)60882-8
Google Scholar
[3]
M. A. Rahman, M. Rahman, A.S. Kumar, and H.S. Lim, CNC microturning an application to miniaturization, International Journal of Machine Tool and Manufacture, 45 (2000) 631-639.
DOI: 10.1016/j.ijmachtools.2004.10.003
Google Scholar
[4]
E. Diniz, J.J. Liu and D.A. Dornfeld, Correlating tool life tool wear and surface roughness by monitoring acoustic emission in finish turning wear, Wear, 152 (1992) 395-407.
DOI: 10.1016/0043-1648(92)90135-u
Google Scholar
[5]
E.O. Ezugwa, and Z.M. Wang, Titanium alloy and their machinability a review, Journal of Materials Processing Technology, 68 (1997) 262-274.
Google Scholar
[6]
Xiaoli Li, A brief review acoustic emission method for tool wear monitoring during turning, International journal of machine tool and manufacture, 42 (2002) 157-165.
DOI: 10.1016/s0890-6955(01)00108-0
Google Scholar
[7]
P.N. Botsaris and J.A. Tsanakas, State of art of method applied to tool condition monitoring (TCM) in unmanned machining operation a review, International Conference of COMADEM, Prague, (2008) 73-87.
Google Scholar
[8]
M. Prakash, and M. Kanthababu, In process tool condition monitoring using acoustic emission sensor in microendmilling, International Journal of Machining Science and Technology, 17 (2013) 209-227.
DOI: 10.1080/10910344.2013.780541
Google Scholar
[9]
Y.B. Guo and S.C. Ammula, Real time acoustic emission monitoring for surface damage in hard machining, International Journal of Machine Tool and Manufacture, 45 (2005) 1622-1627.
DOI: 10.1016/j.ijmachtools.2005.02.007
Google Scholar
[10]
Y. Richard and Y. Steven, Analysis of acoustic emission in chatter vibration with tool wear effect in turning, International Journal of Machine Tool and Manufacture, 40 (2000) 927-941.
DOI: 10.1016/s0890-6955(99)00093-0
Google Scholar
[11]
C. Maradei, R. Piotrkowski, E. Serrano, and J. E. Ruzzante, Acoustic emission signal analysis in machining processes using wavelet packet, UNSAM - CNEA, (2001).
Google Scholar
[12]
M. Kanthababu, M. S. Shunmugam, and M. Singaperumal, Multi sensor based condition monitoring for honing of cylinder liner, International Journal of Manufacturing Research, 7 (2012) 376-396.
DOI: 10.1504/ijmr.2012.050102
Google Scholar
[13]
D.A. Fadare, W.F. Sales, J. Bonney and E.O. Ezugwa, Influence of cutting parameters and tool wear on acoustic emission signal in high speed turning of Ti-6Al-4V alloy, Journal of Emerging Trends in Engineering and Applied Sciences (JETEAS), 68 (2012).
Google Scholar
[14]
Xiaozhi and Beizhi, Acoustic emission method for tool condition monitoring based on wavelet analysis, International Journal of Advance Manufacture Technology, 33 (2007) 968-976.
Google Scholar
[15]
X. Chen, H. Zeng and W. Dietmar, In-process tool monitoring through acoustic emission signal, SIM Tech Technical Report (AT/01/014/AMP), (Automated Material Processing Group, Automation Technology Division).
Google Scholar
[16]
D.E. Lee, I. Hwang, C.M.O. Valente, J.F.G. Oliveira and D.A. Dornfeld, Precision manufacturing process monitoring with acoustic emission. International Journal of Machine Tool and Manufacture, 46 (2006) 176-188.
DOI: 10.1016/j.ijmachtools.2005.04.001
Google Scholar