Experimental Study of the High Temperature Mechanical Behaviors of TLP Bonding of Two Ni-Base Single Crystals

T. Li; Qing Yuan Wang; Ai Qin Wang; Z.X. Wen; Zhu Feng Yue

doi:10.4028/www.scientific.net/KEM.297-300.1489

Paper Titles

On the Creep Fracture Toughness of 2¼Cr1Mo Steel
p.1464

Evaluation of DBTT and Creep Properties of Aged Main Valve Casing by Using Small Punch Specimens
p.1470

Elevated Temperature Mechanical Properties of a Directionally Solidified NiAl/Cr(Mo)-Hf Alloy
p.1477

Tensile Behavior of 17-4PH Stainless Steel under Rapid Heating
p.1482

Experimental Study of the High Temperature Mechanical Behaviors of TLP Bonding of Two Ni-Base Single Crystals
p.1489

Characterization of High Temperature Thermomechanical Fatigue Properties for Particle Reinforced Composites
p.1495

Strength Characteristics and Deformation Behavior of Aluminum Honeycomb Sandwich Plates under Three-Point Bending Loads
p.1503

Suggestion of the Delamination Aspect Ratio in GLARE
p.1510

Influence of Material Composition on Mechanical Properties and Fracture Behavior of Ceramic-Metal Composites
p.1516

HomeKey Engineering MaterialsKey Engineering Materials Vols. 297-300Experimental Study of the High Temperature...

Experimental Study of the High Temperature Mechanical Behaviors of TLP Bonding of Two Ni-Base Single Crystals

Abstract:

In this paper, the mechanical behavior of Ni-base single crystals joint created by TLP bonding is presented. Experimental study has been performed on the TLP single crystal under loading conditions of static uniaxial tension, creep and Three-points-bending (T-P-B) at temperature of 850 °C. Specimens made of the base material, Ni-base single crystal specimens without bonding, were also tested under the same loading conditions. The mechanical behaviors of TLP single crystal is compared to the behaviors of base material. It was found that the static strength of the TLP specimens with the boundary normal to the tensile direction was 63% of the strength of the base material. The creep strength and the fracture ductile strength was more than 57% and 55% of that of the single crystal base material, respectively. The macro and micro graphs of fracture surfaces of specimens indicated that the fracture modes of the samples were brittle fracture.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volumes 297-300)

Pages:

1489-1494

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.297-300.1489

Citation:

Cite this paper

Online since:

November 2005

Authors:

T. Li, Qing Yuan Wang, Ai Qin Wang, Z.X. Wen, Zhu Feng Yue

Keywords:

Brittle Fracture, Creep Strength, Fracture Ductile, Ni-Base Single Crystal Super Alloy, Static Tensile Strength, Transient Liquid Phase (TLP) Bonding

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] D.S. Duvall, W.A. Owczarski and D.F. Paulonis: Weld. J. Vol. 53 (1974), pp.203-214.

Google Scholar

[2] X.H. Li, X.P. Zhong and C.X. Cao: Aeronautical Mater. J. Vol. 23 (in Chinese) (2003).

Google Scholar

[3] W.F. Gale, D.A. Butts, M. Di Ruscio and T. Zhou: Metallurgical & Mater. Trans. Vol. 33A (2002), pp.3205-3213.

Google Scholar

[4] Byongho Rhee, Sungjoo Roh and Dohyang Kim: Mater. Trans. Vol. 44 (2003), pp.1014-1023.

Google Scholar

[5] W. Li, T. Jin and X.F. Sun, etc.: Mater. Sci. & Tech. J. Vol. 18 (in Chinese) ( 2002), pp.54-56.

Google Scholar

[6] Yukinobu Natsume, Kenichi Ohsasa and Toshio Narita: Mater. Trans. Vol. 44 (2003), pp.819-823.

Google Scholar

[7] C.E. campbell and W.J. Boettinger: Metallurgical & Mater. Trans. Vol. 31A (2000), pp.2835-2847.

Google Scholar

[8] Y.H. Xie and X.F. Liu, etc: Mater. Eng. J. 6 (in Chinese) (2000), pp.42-44.

Google Scholar

[9] Z.Y. Ying and Z.F. Yue, etc: The Stracture Strength and Life of Ni-Base Single Crystal Super Alloy (National Defense Industry Publications, China 2003).

Google Scholar