[1]
K. Osakada, K. Mori, T. Altan, P. Groche , Mechanical Servo Press Technology for Metal Forming, CIRP Annals – Manufacturing Technology 60 (2011) 651-672.
DOI: 10.1016/j.cirp.2011.05.007
Google Scholar
[2]
T. Altan, et al., Determination of Sheet Material Properties using Biaxial Bulge Tests, Proceedings of the 2nd Int. Conference on Accuracy in Forming Technology, Nov (2006). 13-15, Chemnitz, Germany.
Google Scholar
[3]
A. Nasser, A. Yadaj, P. Pathak, T. Altan, Determination of the flow stress of five AHSS sheet materials (DP 600, DP 780, DP 780-CR, DP 780-HY and TRIP 780) using the uniaxial tensile and the biaxial Viscous Pressure Bulge (VPB) tests, Journal of Materials Processing Technology 210 (2010).
DOI: 10.1016/j.jmatprotec.2009.10.003
Google Scholar
[4]
E. Billur, T. Altan, Determining material properties and batch-to-batch variations with bulge testing, Stamping Journal, Sep/Oct (2013) 16-17.
Google Scholar
[5]
T. Mao, X. Li, T. Altan, Evaluation of Lubricants for Stamping of Al5182-O Aluminum Sheet Using Cup Drawing Test, CPF report 2. 2/13/04, Columbus, Ohio, July (2013).
Google Scholar
[6]
A. Groseclose, G. Srinivasan, A. Fallahiarezoodar, T. Altan, Forming of AHSS Using Servo Press, CPF Report 1. 4/14/01, Columbus, Ohio, August (2014).
Google Scholar
[7]
Information on http: /www. matweb. com [November, 2014].
Google Scholar
[8]
A. Groseclose, J.Y. Yoon, E. Billur, T. Altan, Optimization of Ram Velocity for Deep Drawing with Servo-Drive Presses using Gas Spring Cushion System, (2013) CPF Report 5. 6/12/01.
Google Scholar
[9]
M. P. Pereira, B. F. Rolfe, Temperature conditions during 'Cold' sheet metal stamping, Journal of Materials Processing Technology, 214 (2014) 1749-1758.
DOI: 10.1016/j.jmatprotec.2014.03.020
Google Scholar
[10]
J. H. Kim, J. H. Sung, K. Piao, R. H. Wagoner, The shear fracture of dual- phase steel, International Journal of Plasticity, 27 (2011) 1658-1676.
DOI: 10.1016/j.ijplas.2011.02.009
Google Scholar