[1]
E. Liverani, A.H.A. Lutey, A. Ascari, A. Fortunato, L. Tomesani, A complete residual stress model for laser surface hardening of complex medium carbon steel components, Surface and Coatings Technology. 302 (2016) 100–106.
DOI: 10.1016/j.surfcoat.2016.05.066
Google Scholar
[2]
N.V. Plotnikova, V.Y. Skeeba, N.V. Martyushev, R.A. Miller, N.S. Rubtsova, Formation of high-carbon abrasion-resistant surface layers when high-energy heating by high-frequency currents, IOP Conference Series: Materials Science and Engineering. 156 (2016).
DOI: 10.1088/1757-899x/156/1/012022
Google Scholar
[3]
V.V. Ivancivsky, V.Y. Skeeba, I.A. Bataev, D.V. Lobanov, N.V. Martyushev, O.V. Sakha, I.V. Khlebova, The features of steel surface hardening with high energy heating by high frequency currents and shower cooling, IOP Conference Series: Materials Science and Engineering. 156 (2016).
DOI: 10.1088/1757-899x/156/1/012025
Google Scholar
[4]
V. Yu. Skeeba, V.V. Ivancivsky, N.V. Martyushev, D.V. Lobanov, N.V. Vakhrushev, A.K. Zhigulev, Numerical Simulation of Temperature Field in Steel under Action of Electron Beam Heating Source, Key Engineering Materials. 712 (2016) 105–111.
DOI: 10.4028/www.scientific.net/kem.712.105
Google Scholar
[5]
V. Engelkoa, B. Yatsenkoa, G. Muellerb, H. Bluhmb, Pulsed electron beam facility (GESA) for surface treatment of materials, Vacuum. 2–3 (2001) 211–216.
DOI: 10.1016/s0042-207x(00)00446-2
Google Scholar
[6]
V.V. Ivancivsky, I.A. Bataev, T.G. Martynova, N.V. Vakhrushev, G.O. Cha, The formation of the liquid phase in the surface layer of steel components in the high-energy heat hardening by high frequency currents, Obrabotka metallov (in Russian) 3 (2016).
Google Scholar
[7]
E.E. Kornienko, A.A. Nikulina, A.G. Bannov, V.I. Kuz'min, M. Mildebrath, V.A. Bezrukova, A.A. Zhoidik, The influence of flowing temperature on the structure and properties of the self-fluxing coatings, Obrabotka metallov (in Russian) 4 (2016).
DOI: 10.17212/1994-6309-2016-4-52-62
Google Scholar
[8]
Y.S. Chesov, E.A. Zverev, V.V. Ivancivsky, V. Yu. Skeeba, N.V. Plotnikova, D.V. Lobanov, Structure of wear resistant plasma coatings after high-energy treatment using high-frequency currents, Obrabotka metallov (in Russian) 4 (2014) 11–10.
Google Scholar
[9]
E.E. Kornienko, E.J. Lapushkina, V.I. Kuzmin, S.P. Vaschenko, I.P. Gulyaev, E.V. Kartaev, D.S. Sergachev, N. Kashapov, S. Sharifullin, I. Fayrushin, Air plasma sprayed coatings of self-fluxing powder materials, Journal of Physics: Conference Series. 567 (2014).
DOI: 10.1088/1742-6596/567/1/012010
Google Scholar
[10]
V. Skeeba, V. Pushnin, D. Kornev, Quality improvement of wear-resistant coatings in plasma spraying integrated with high-energy heating by high frequency currents, Applied Mechanics and Materials. 788 (2015) 88-94.
DOI: 10.4028/www.scientific.net/amm.788.88
Google Scholar
[11]
E.E. Kornienko, A.A. Nikulina, N.S. Belousova, D.V. Lazurenko, A.S. Ivashutenko, V.I. Kuz'Min, Structural features of Ni-Cr-Si-B materials obtained by different technologies, IOP Conference Series: Materials Science and Engineering. 156 (2016).
DOI: 10.1088/1757-899x/156/1/012020
Google Scholar
[12]
Y.S. Chesov, E.A. Zverev, P. V. Tregubchak, Technological assurance of quality of plasma coatings, Obrabotka metallov (in Russian) 1 (2012) 10–13.
Google Scholar
[13]
V. Yu. Skeeba, V.V. Ivancivsky, D.V. Lobanov, A.K. Zhigulev, P. Yu. Skeeba, Integrated Processing: Quality Assurance Procedure of the Surface Layer of Machine Parts during the Manufacturing Step Diamond Smoothing, IOP Conference Series: Materials Science and Engineering. 125 (2015).
DOI: 10.1088/1757-899x/125/1/012031
Google Scholar
[14]
D.V. Lobanov, P.V. Arkhipov, A.S. Yanyushkin, V.Y. Skeeba, Research of influence electric conditions combined electrodiamond processing by on specific consumption of wheel, IOP Conference Series: Materials Science and Engineering, 142 (2016).
DOI: 10.1088/1757-899x/142/1/012081
Google Scholar
[15]
V. Yu. Skeeba, V.V. Ivancivsky, A.V. Kutyshkin, K.A. Parts, Hybrid processing: the impact of mechanical and surface thermal treatment integration onto the machine parts quality, IOP Conference Series: Materials Science and Engineering. 126 (2016).
DOI: 10.1088/1757-899x/126/1/012016
Google Scholar