[1]
Wang Q, Li X. Effects of Nb, V, and W on microstructure and abrasion resistance of Fe–Cr–C hardfacing alloys. J. Welding. 89 (2010) 133–139.
Google Scholar
[2]
Metlitskii V.A. Flux-cored wires for arc welding and surfacing of cast iron. J. Welding International. 22 (2008) 796-800.
DOI: 10.1080/09507110802593646
Google Scholar
[3]
D.V. Valuev, V.I. Danilov, A. Serikbol, A.V. Valueva, Research into the causes of the cracking of large workpieces low carbon steel by pressure treatment, J. Advanced Materials Research. 1040 (2014) 250-255.
DOI: 10.4028/www.scientific.net/amr.1040.250
Google Scholar
[4]
R. Li. Wear and high temperature oxidation behavior of wire arc sprayed iron based coatings. J. Surface Engineering. 30 (2014) 784-790.
DOI: 10.1179/1743294414y.0000000331
Google Scholar
[5]
A.I. Gusev, I.V. Osetkovskiy, Studying properties of metal deposited by powder wire of system C-Mn-Si-Cr-V-Mo-Со. Progressive technologies and economic in mechanical engineering: Works collection of VII National Scientific-Practical conference for students and young students in 2 volumes. Yurga Technological Institute. –Tomsk: Publishing of Tomsk Polytechnic University, 1 (2016).
DOI: 10.18324/2077-5415-2020-1-47-52
Google Scholar
[6]
A.I. Gusev, N.V. Kibko, N.A. Kozyrev, M.V. Popova, I.V. Osetkovsky, A study on the properties of the deposited metal by flux cored wires 40GMFR and 40H3G2MF. J. IOP Conf. Series: Materials Science and Engineering. 150 (2016) 1-9.
DOI: 10.1088/1757-899x/150/1/012033
Google Scholar
[7]
A.I. Gusev, N.V. Kibko, M.V. Popova, N.A. Kozyrev, I.V. Osetkovskiy, Structure and properties of deposited layers, surfaced by using powder wires 40GMFR and 40H3G2MF, J. Bulletin of mining-metallurgy section in Russian Academy of Natural Science. Metallurgy department, Novokuznetsk: Publishing. SibISU, 36 (2016).
DOI: 10.1088/1757-899x/150/1/012033
Google Scholar
[8]
S.C. Lim, M. Gupta, Y.S. Goh, K.C. Seow, Wear resistant WC–Co composite hard coatings, J. Surface Engineering. 13 (1997) 247-250.
DOI: 10.1179/sur.1997.13.3.247
Google Scholar
[9]
R.E. Kryukov, N.A. Kozyrev, G.V. Galevsky, Y.V. Bendre, V.F. Goryushkin, D.V. Valuev, Some aspects of oxidation-reduction reactions under carbon-bearing flux welding, J. IOP Conference Series: Materials Science and Engineering. 91 (2015) 1-6.
DOI: 10.1088/1757-899x/91/1/012016
Google Scholar
[10]
Yu. Zhuk, Super-Hard Wear-Resistant Coating Systems, J. Materials Technology. 14 (1999) 126-129.
DOI: 10.1080/10667857.1999.11752827
Google Scholar
[11]
G.V. Galevsky, V.V. Rudneva, A.K. Garbuzova, D.V. Valuev, Titanium carbide: nanotechnology, properties, application, J. IOP Conference Series: Materials Science and Engineering. 91 (2015) 1-7.
DOI: 10.1088/1757-899x/91/1/012017
Google Scholar
[12]
N.N. Malushin, V.L. Osetkovsky, D.V. Valuev, A.V. Valueva, A. Serikbol, Selection criteria parameter thermal cycle during surfacing heat resistance high hardness parts of metallurgical equipment, J. Applied Mechanics and Materials. 682 (2014).
DOI: 10.4028/www.scientific.net/amm.682.69
Google Scholar