The Formation of Surface Roughness of Piston Rings for the Purpose of Improving the Adhesion of Wear-Resistant Coatings

Vyacheslav V. Maksarov; V.A. Krasnyy

doi:10.4028/www.scientific.net/KEM.736.73

Paper Titles

Determination of Parameters of Endurance Limit Distribution Law of Material by the Methods of Nonparametric Statistics and Kinetic Theory of High-Cycle Fatigue
p.52

Thermal Properties and Phase Composition of Full-Scale Corium of Fast Energy Reactor
p.58

Influence of the Cobalt Additive on the Flux Cored Wire of System Fe-C-Si-Mn-Cr-Ni-Mo-V
p.63

Mathematical Models for Calculation of Crack Resistance of Composite Materials
p.68

The Formation of Surface Roughness of Piston Rings for the Purpose of Improving the Adhesion of Wear-Resistant Coatings
p.73

The Research into the Effect of Conditions of Combined Electric Powered Diamond Processing on Cutting Power
p.81

Forecasting Performance of Ceramic Cutting Tool
p.86

Technology of Selective Laser Melting Formation of Heterogeneous Powder Structures
p.91

Improving Dimensional Accuracy of Turning on CNC Equipment
p.95

HomeKey Engineering MaterialsKey Engineering Materials Vol. 736The Formation of Surface Roughness of Piston Rings...

The Formation of Surface Roughness of Piston Rings for the Purpose of Improving the Adhesion of Wear-Resistant Coatings

Abstract:

The paper considers the application of wear resistant coatings by methods of gas thermal and flame spraying. It demonstrates the relationship between adhesion strength of the sprayed coating and surface roughness after abrasive jet machining using piston rings with steel-molybdenum coating as an example. The authors consider the results of studies aimed defining the relationship between surface roughness and of jet-abrasive machining conditions: the distance between the nozzle exit and the workpiece, the number of passages, the operating air pressure and frequency of the shot swapping.

You might also be interested in these eBooks

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 736)

Pages:

73-78

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.736.73

Citation:

Cite this paper

Online since:

June 2017

Authors:

Vyacheslav V. Maksarov*, V.A. Krasnyy

Keywords:

Abrasive Jet Machining, Adhesion Strength, Flame Spraying, Piston Rings, Surface Roughness, Thermal, Wear-Resistant Deposited Coating

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] V.A. Kudinov, G.V. Bobrov, The coating deposition. Theory, technology and equipment. Metallurgy, Moscow, (1992).

Google Scholar

[2] A.G. Suslov, B.N. Fedorov, O. A. Gorlenko, Technological support and enhance the operational properties of parts and their connections. Mechanical Engineering, Moscow. (2006).

Google Scholar

[3] K. Holmberg, A. Matthews, Coatings Tribology – Properties, Mechanisms, Techniques and Applications in Surface Engineering, Tribology and Interface Engineering Series 56, Elsevier, Amsterdam, (2009).

DOI: 10.1016/s0167-8922(08)70748-x

Google Scholar

[4] Kamo, Lloyd et al. Diesel Engine Cylinder Bore Coating for Extreme Operating Conditions, SAE Technical Paper (2007).

DOI: 10.4271/2007-01-1439

Google Scholar

[5] S.J. Shaffer, M.J. Rogers, Tribological performance of various coatings in unlubricated sliding for use in small arms action components - A case study. Wear, 263 (2007) 1281–1290.

DOI: 10.1016/j.wear.2007.01.115

Google Scholar

[6] M.B. Myakonkov, Comparative study of methods of applying coatings on piston rings for reduction of wear, J. Processing of metals. 3(2010) 36 – 39.

Google Scholar

[7] I.N. Kravchenko, E.M. Bobryshev, A.F. Puzrykov, Ensuring the reliability of the adhesive bond of plasma coatings on piston rings in internal combustion engines with regard to their thermal and thermostress state, J. International journal of experimental education, 10 (2013).

Google Scholar