Flexural Strength and Dynamic Mechanical Behavior of Rice Husk Ash Silica Filled Acrylic Resin Denture Base Material

Panjaporn Wongwitthayakool; Tanittha Sintunon; Wichaya Tanagetanasombat; Pongkarn Soonthornchai; Ahmed A. Abbas

doi:10.4028/www.scientific.net/KEM.824.94

Paper Titles

Optimization of Mixing Conditions on the Physical and Tribological Properties of Brake Pads
p.67

Development of a Cold-Pressing Process for the Production of Brake Pads with Uniform Density
p.73

Post-Harvest Shelf Life Extension of Mango Using Chitosan and Carboxymethyl Cellulose-Based Coatings
p.81

The Physical and Mechanical Properties of Biocomposite Films Composed of Poly(Lactic Acid) with Spent Coffee Grounds
p.87

Flexural Strength and Dynamic Mechanical Behavior of Rice Husk Ash Silica Filled Acrylic Resin Denture Base Material
p.94

Effect of Mastication Time on the Properties of Stearic Acid Coated Pineapple Leaf Fiber Reinforced Natural Rubber
p.100

Improving the Adhesion between Pineapple Leaf Fiber and Natural Rubber by Using Urea Formaldehyde Resin
p.107

Effect of Preparation Conditions on Heavy Metal Adsorption Characteristics of Activated Carbon Prepared from Non-Fibrous Material of Pineapple Leaves
p.114

Studies on the Preparation and Application of Tetramethylsilylcellulose from Rain Tree Sawdust
p.121

HomeKey Engineering MaterialsKey Engineering Materials Vol. 824Flexural Strength and Dynamic Mechanical Behavior...

Flexural Strength and Dynamic Mechanical Behavior of Rice Husk Ash Silica Filled Acrylic Resin Denture Base Material

Abstract:

Silica extracted from rice husk ash (RHA-Si) by pretreatment with hydrochloric acid followed by calcination at 700°C, was prepared. It was investigated with regard to its chemical composition and structure using X-Ray Fluorescence spectroscopy (XRF) and X-Ray Diffractometry (XRD). RHA-Si (0, 0.25, 0.5 and 1% w/w) was incorporated into poly(methyl methacrylate) (PMMA) or acrylic resin powder. Microhardness, flexural strength and dynamic mechanical properties of RHA-Si filled PMMA were then determined. The chemical composition analysis showed that RHA-Si contains a large amount of silica with an amorphous structure. The microhardness of acrylic resin filled with RHA-Si does not change significantly with increasing RHA-Si loading. Flexural strength of filled acrylic resin increases with increasing RHA-Si loadings up to 0.25% w/w. It then decreases with increasing RHA-Si loadings. Dynamic mechanical behavior illustrates that polymer-filler interactions play an important role in reinforcement.

You might also be interested in these eBooks

Green Convergence on Materials Frontiers II

View Preview

Info:

Periodical:

Key Engineering Materials (Volume 824)

Pages:

94-99

DOI:

https://doi.org/10.4028/www.scientific.net/KEM.824.94

Citation:

Cite this paper

Online since:

October 2019

Authors:

Panjaporn Wongwitthayakool*, Tanittha Sintunon, Wichaya Tanagetanasombat, Pongkarn Soonthornchai, Ahmed A. Abbas

Keywords:

Denture Base, Dynamic Mechanical Properties, Flexural Strength, Rice Husk Ash, Silica

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

References

[1] K. Anusavice, C. Shen, H.R. Rawls, Phillips' Science of Dental Materials, 12th ed., Elsevier, Saunders, (2012).

Google Scholar

[2] R.K. Alla, K.N.R. Swamy, R. Vyas, A. Konakanchi, Conventional and contemporary polymers for the fabrication of denture prosthesis: Part i - Overview, composition and properties, Int. J. App. Dent. Sci. 1(4) (2015) 82-89.

Google Scholar

[3] M.M. Gad, S.M. Fouda, F.A. Al-Harbi, R. Näpänkangas, A. Raustia, PMMA denture base material enhancement: a review of fiber, filler, and nanofiller addition, Int. J. Nanomed. 12 (2017) 3801-3812.

DOI: 10.2147/ijn.s130722

Google Scholar

[4] I.N. Safi, Evaluation the effect of nano-fillers (TiO2, Al2O3, SiO2) addition on glass transition temperature, E-Moudulus and coefficient of thermal expansion of acrylic denture base material, J. Baghdad Coll. Dent. 26(1) (2014) 37-41.

DOI: 10.12816/0015162

Google Scholar

[5] H.A. Alnamel, M. Mudhaffer, The effect of silicon di oxide nano-fillers reinforcement on some properties of heat cure polymethyl methacrylate denture base material, J. Baghdad Coll. Dent. 26(1) (2014) 32-36.

DOI: 10.12816/0015142

Google Scholar

[6] S. Balos, B. Pilic, D. Markovic, J. Pavlicevic, O. Luzanin, Poly(methyl-methacrylate) nanocomposites with low silica addition, J. Prosthet. Dent. 111(4) (2014) 327-334.

DOI: 10.1016/j.prosdent.2013.06.021

Google Scholar

[7] E.L. Foletto, E. Gratieri, L.H. de Oliveira, S.L. Jahn, Conversion of rice hull ash into soluble sodium silicate, Mater. Res. 9(3) (2006) 335-338.

DOI: 10.1590/s1516-14392006000300014

Google Scholar

[8] C. Real, M.D. Alcalá, J.M. Criado, Preparation of silica from rice husks, J. Am. Ceram. Soc. 79(8) (1996) 2012-2016.

Google Scholar

[9] M.Y. Ahmad Fuad, M. Jamaludin, Rice husk ash as fillers in polypropylene a preliminary Study, Int. J. Polym. Mater. Po. 19(1-2) (1993) 75-92.

DOI: 10.1080/00914039308012019

Google Scholar

[10] S. Siriwardena, H. Ismail, U.S. Ishiaku, A comparison of white rice husk ash and silica as fillers in ethylene–propylene–diene terpolymer vulcanizates, Polym. Int. 50(6) (2001) 707-713.

DOI: 10.1002/pi.691

Google Scholar

[11] T. Saowapark, U. Amphaiphan, E. Chaichana, P. Wongwitthayakool, Enhancing properties of deproteinized natural rubber with rice husk ash silica for use as a dental material, Key Eng. Mater. 675-676 (2016) 564-568.

DOI: 10.4028/www.scientific.net/kem.675-676.564

Google Scholar

[12] Y.E. Şimşek, Preparation and characterization of high purity silica obtained from rice husks, Acta Phys. Pol. B. 132(3) (2017) 1002-1005.

DOI: 10.12693/aphyspola.132.1002

Google Scholar

[13] P. Sae-oui, C. Sirisinha, U. Thepsuwan, K. Hatthapanit, Comparison of reinforcing efficiency between Si-69 and Si-264 in a conventional vulcanization system, Polym. Test. 23 (2004) 871-879.

DOI: 10.1016/j.polymertesting.2004.05.008

Google Scholar