Characterization of Glass Forming Alloy Fe43.2Co28.8B19.2Si4.8Nb4 Processed by Spray Forming and Wedge Mold Casting Techniques

C. Triveño Rios; Conrado R. M. Afonso; Claudemiro Bolfarini; Walter José Botta Filho; Claudio Shyinti Kiminami

doi:10.4028/www.scientific.net/MSF.691.23

Paper Titles

2Mg-Fe Alloy Processed by Hot Extrusion: Influence of Particle Size and Extrusion Reduction Ratio on Hydrogenation Properties
p.3

Effect of Nickel Addition on Microstructure and Mechanical Properties of Aluminum-Based Alloys
p.10

Microstructural Characterization of Al-Cu-Fe Alloys in the Quasicrystalline Composition Range
p.15

Characterization of Glass Forming Alloy Fe_43.2Co_28.8B_19.2Si_4.8Nb₄ Processed by Spray Forming and Wedge Mold Casting Techniques
p.23

Dispersion of CNTs in Aluminum 2024 Alloy by Milling Process
p.27

Titanium Effect on Microstructure and Fracture toughness of Al₂O₃-BASED Composites
p.32

Mechanical Study on Al-based Composites Synthesized by Mechanical Milling and Hot Extrusion
p.37

Synthesis and Annealing Effects on the Structure of Alumina by Polyol Mediated Process
p.44

HomeMaterials Science ForumMaterials Science Forum Vol. 691Characterization of Glass Forming Alloy...

Characterization of Glass Forming Alloy Fe_43.2Co_28.8B_19.2Si_4.8Nb₄ Processed by Spray Forming and Wedge Mold Casting Techniques

Abstract:

Bulk glassy alloys based on the Fe-Co-B-Si-Nb system have already achieved high levels of mechanical strength. The present work investigated the microstructural evolution of Fe_43.2Co_28.8B_19.2Si_4.8Nb₄ alloy during the spray forming and wedge mold casting processes, with emphasis on the formation of amorphous phase. The microstructure was evaluated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffraction (XRD). The region outer the spray deposit showed the formation of an amorphous structure with a thickness of ~2.5 mm, while that of the wedge-shaped sample exhibited a thickness of up to ~1.5 mm, suggesting that both processes show a promising potential for the production of bulk glass alloys.

You might also be interested in these eBooks

Metastable and Nanostructured Materials IV

View Preview

Info:

Periodical:

Materials Science Forum (Volume 691)

Pages:

23-26

DOI:

https://doi.org/10.4028/www.scientific.net/MSF.691.23

Citation:

Cite this paper

Online since:

June 2011

Authors:

C. Triveño Rios, Conrado R. M. Afonso, Claudemiro Bolfarini, Walter José Botta Filho, Claudio Shyinti Kiminami

Keywords:

Amorphous Alloy, Fe-Co-B-Si-Nb System, Rapid Solidification, Spray Forming

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

References

[1] A. Inoue, B. L. Shen, C. T. Chang, Acta Materialia, Vol. 52 (2004), p.4093.

Google Scholar

[2] C. Triveño Rios, J. B. Fogagnolo, C. Bolfarini, W. J. Botta, C. S. Kiminami, Rev. Adv. Mater. Sci., Vol. 18 (2008), p.408.

Google Scholar

[3] P. S. Grant, Progr. in Mater. Sci., Vol. 39 (1995), p.495.

Google Scholar

[4] C. R. M. Afonso, C. Bolfarini, W. J. Botta, C. S. Kiminami, Mat. Sci. Eng. A, Vols. 449-451 (2007), p.884.

Google Scholar

[5] C. R. M. Afonso, C. Bolfarini, C. S. Kiminami, N. D. Bassim, M. J. Kaufman, M. F. Amateau, T. J. Éden, J. M. Galbraith, J. Non-Cryst. Solids, Vol. 284, (2001), p.134.

DOI: 10.1016/s0022-3093(01)00392-1

Google Scholar

[6] T. B. Massalski, Binary Alloy Phase Diagrams, American Society for Metals, Metals Park, OH, 1986, p.761.

Google Scholar

[7] T. Gloriant, S. Suriñach, M.D. Baró, Journal of Non-Crystalline Solids, Vol. 333 (2004), p.320.

Google Scholar

[8] J. M. Gorría, J. S. Garitaonandia, P. Barandiarán, J. Phys. Condens. Mater., V. 8 (1996) p.5925.

Google Scholar

[9] A. Hirata, Y. Hirotsu, K. Amiya, N. Nishiyama, A. Inoue, Intermetallics, Vol. 16 (2008), p.491.

Google Scholar