Paper Titles

Varying of Oil Consumption of Fluid-Film Bearing’s Surface Layer by Means of Application of Anti-Friction Coatings
p.1263

Laser-Spark Modification of the Surfaces of Structural Materials by the Example of St3
p.1268

Accelerated Forming on the Sol-Silicate Binder in Precision Casting
p.1273

Accelerated Tests of Protective Properties of Packaging Materials for Cold-Rolled Steel
p.1278

Application of Gas-Thermal Coatings on Low-Alloyed Steel Surfaces
p.1284

Features of Steel Tape Deformation-Strength Properties Formation by Plasma-Cavitating Treatment
p.1291

Gas Corrosion of Pyrolysis Furnace Coils
p.1297

Investigation of the Hydrogen Stratification of the Metal of the Active Gas Pipeline
p.1302

Methods for Determining the Quality of Galvanic Chromium Coating
p.1307

HomeSolid State PhenomenaSolid State Phenomena Vol. 284Application of Gas-Thermal Coatings on Low-Alloyed...

Application of Gas-Thermal Coatings on Low-Alloyed Steel Surfaces

Article Preview

Abstract:

In the present scientific work a thickness calculation procedure of an aluminum gas-thermal coating, sprayed on the low-alloyed steel surfaces, in order to provide its effective protection at high temperatures, has been developed. The method is based on the calculations of the diffusion layer thickness with consideration the temperature change on the blank`s surface and on the dependence of the parameter (directly proportional to the diffusion coefficient) on the temperature over the range 700 to 1200 °C.

You might also be interested in these eBooks

Materials Engineering and Technologies for Production and Processing IV

Info:

Periodical:

Solid State Phenomena (Volume 284)

Pages:

1284-1290

DOI:

https://doi.org/10.4028/www.scientific.net/SSP.284.1284

Citation:

Cite this paper

Online since:

October 2018

Authors:

Alla A. Gerasimova*, Sergey Gorbatyuk, Victoria V. Devyatiarova

Keywords:

Diffusion Layer, Draw, Gas-Thermal Coating, Heat Treatment, Oxidation, Plate Slab, Porosity, Thickness

Export:

RIS, BibTeX

Price:

Permissions:

Request Permissions

* - Corresponding Author

[1] S.S. Solntsev, Protective coating of metals when heated, Librokom, (2009).

[2] L.P. Kondratov, N.N. Bozhko, Technology of materials and coatings, Moscow, MGUP, (2008).

[3] Ye.N. Grishina, S.S. Buynovich, V.G. Mangush, Manufacture of heavy-gauge steel, Collection of research papers, Moscow, Metallurgiya. 4 (1979) 74-76.

[4] A.V. Golovanov, Structure and phase composition of the surface layer on steel after aluminizing, Moscow, Metallography and heat treatment of metals. 6 (2008) 42-45.

[5] A.G. Radyuk, The effect of aluminizing of the slabs on the structure and phase composition of surface layer of hot rolled sheets, Production of rolled products. 8 (2007) 15-19.

[6] T.L. Lukanina, I.S. Mikhaylova, M.A. Radin, Chemical resistance of materials and corrosion protection, SPbGTURP, Saint Petersburg, (2014).

[7] A.A. Gerasimova, A.G. Radyuk, The improvement of the surface quality of workpieces by coating, CIS Iron and Steel, Review (2014) 33-35.

[8] M.L. Labanov, N.I. Kardonina, N.G. Rossina, A.S. Yurovskih, Protective coating, Ekaterinburg, Publishing house Ural, (2014).

[9] S.M. Gorbatyuk, A.A. Gerasimova, N.N. Belkina, Applying Thermal Coatings to Narrow Walls of the Continuous-Casting Molds, Materials Science Forum. 870 (2016) 564-567.

DOI: 10.4028/www.scientific.net/msf.870.564

[10] S.M. Gorbatyuk, S.M Pavlov, A.N. Shapoval, S.M. Gorbatyuk, Experience in application of screw rolling mill for deforming the billets of refractory metals, Metallurg. 5 (1998) 32-35.

[11] V.R. Ryabov, Litrovaya steel, Moscow, Metallurgiya, (1973).

[12] A.G. Radjuk, A.E. Titlianov, Investigation of temperature field during heating the steel strip with aluminum coating, Moscow, MISIS,(1987).

[13] A.A. Gerasimova, A.G. Radyuk, A.E. Titlianov, Creation of a diffusional aluminum layer on the narrow walls of continuous-casting molds, Steel in Translation. 45 (2015) 3 185-187. (DOI): 10.3103/S0967091215030079.

DOI: 10.3103/s0967091215030079

[14] Information on http://e.lanbook.com/book/(2025).

[15] S.S. Kutateladze, V.M. Borishanskiy, Handbook of heat transfer, Moscow, (2012).

[16] A.E. Titlyanov, A.G. Radyuk, S.I. Pedos, Improving the quality of aluminum thermal spray coating by heat treatment and rolling, Moscow, МГМА. (1994) 100-106.

[17] F.D. Kazyyev F.D, A.E. Titlyanov, M.V. Fetisova, Protective aluminum cover when the hot rolling, Moscow, MISIS. 140 (1992) 136-140.

[18] P.T. Gorodnov, The increase in heat resistance of steel products method of aluminizing, Moscow, Mashgiz, (1962).