Distribution & Access For Publication Downloads News About Us Contact Us
Paper Titles
Anomaly Detection during Thermoplastic Composite Infusion: Monitoring Strategy through Thermal Sensors
p.1423
Defects Reduction in the Robotic Layup Process
p.1437
Offline Robot-Path-Planning and Process Simulation for the Structural Analysis of Coreless Wound Fibre-Polymer Composite Structures
p.1445
In-Mold-Assembly of Hybrid Bending Structures by Compression Molding
p.1457
Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints
p.1468
Realtime Prediction of Self-Pierce Riveting Joints - Prognosis and Visualization Based on Simulation and Machine Learning
p.1479
Investigations on Combined In Situ CT and Acoustic Analysis during Clinching
p.1489
The Effect of the Setting Force on the Fatigue Resistance of a Blind Rivet Nut Set in CFRP
p.1498
Influence of the Surrounding Sheet Geometry on a Clinched Joint
p.1505

Further Development of an Adaptive Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints

Article Preview

Abstract:

Mechanical joining processes are an essential part of modern lightweight construction. They permit materials of different types to be joined in a way that is suitable for the loads involved. These processes reach their limits, however, as soon as the boundary conditions change. In most cases, these elements are specially adapted to the joining point and cannot be used universally. Changes require cost-intensive adaptation of both the element and the process control, thus making production more complex. This results in high costs due to the increased number of auxiliary joining element variants required and reduces the economic efficiency of mechanical joining. One approach to overcoming this issue is the use of adaptive auxiliary joining elements formed by friction spinning. This article presents the current state of research on pre-hole-free joining with adaptive joining elements. The overall process chain is illustrated, explained and analyzed. Special attention is paid to demonstrating the feasibility of pre-hole-free joining with adaptive joining elements. The chosen mechanical parameters are subsequently listed. Finally, a comprehensive outlook of the future development potential is derived.

By email Full Text Pdf
You have full access to the following eBook
Achievements and Trends in Material Forming Read eBook

Info:

Periodical:

Key Engineering Materials (Volume 926)

Pages:

1468-1478

DOI:

https://doi.org/10.4028/p-1n6741

Citation:

Cite this paper

Online since:

July 2022

Authors:

Christian Wischer*, Werner Homberg

Keywords:

Friction Riveting, Friction Spinning, Mechanical Joining, Versatile Process Chain

Export:

RIS, BibTeX

Permissions:

Creative Commons CC BY 4.0

* - Corresponding Author

References

[1] Lambiase, F.; Scipioni, S.I.; Lee, C.-J.; Ko, D.-C.; Liu, F. A State-of-the-Art Review on Advanced Joining Processes for Metal-Composite and Metal-Polymer Hybrid Structures. Materials 2021, 14, 1890, https://doi.org/10.3390/ma14081890.

DOI: 10.3390/ma14081890

Google Scholar

[2] K. Mallick, Advanced materials for automotive applications: an overview J. Rowe (Ed.), Advanced materials in automotive engineering, Woodhead Publishing, Oxford (2012), pp.5-27, https://doi.org/10.1533/9780857095466.5.

DOI: 10.1533/9780857095466.5

Google Scholar

[3] Geoffrey, D.: Materials for Automobile Bodies, Kap.2: Design and material utilization, Elsevier, S. 17-91 (2012), https://doi.org/10.1016/B978-0-08-096979-4.00002-5.

Google Scholar

[4] Geoffrey, D.: Materials for Automobile Bodies, Kap.6: Component assembly: materials joining technology, Elsevier, S. 17-91 (2012), https://doi.org/10.1016/B978-0-08-096979-4.00006-2.

Google Scholar

[5] Merklein, M.; Johannes, M.; Lechner, M.; Kuppert, A.: A review on tailored blanks-Production, applications and evaluation. In: Journal of Materials Processing Technology 214 (2), S. 151-164, 2014, https://doi.org/10.1016/j.jmatprotec.2013.08.015.

DOI: 10.1016/j.jmatprotec.2013.08.015

Google Scholar

[6] Martinsen, K., Hu, S. J., & Carlson, B. E. (2015). Joining of dissimilar materials. CIRP Annals, 64(2), 679–699, https://doi.org/10.1016/j.cirp.2015.05.006.

DOI: 10.1016/j.cirp.2015.05.006

Google Scholar

[7] Junying Min, Jingjing Li, Yongqiang Li, Blair E. Carlson, Jianping Lin, Wei-Ming Wang, Friction stir blind riveting for aluminum alloy sheets, Journal of Materials Processing Technology, Volume 215, 2015, Pages 20-29, ISSN 0924-0136, https://doi.org/10.1016/ j.jmatprotec.2014.08.005.

DOI: 10.1016/j.jmatprotec.2014.08.005

Google Scholar

[8] Li, Yongbing & Wei, ZeYu & Wang, Jiao & Li, YaTing. (2013). Friction Self-Piercing Riveting of Aluminum Alloy AA6061-T6 to Magnesium Alloy AZ31B. Journal of Manufacturing Science and Engineering, https://doi.org/10.1115/1.4025421.

DOI: 10.1115/1.4025421

Google Scholar

[9] Yunwu Ma, Sizhe Niu, Huihong Liu, Yongbing Li, Ninshu Ma, Microstructural evolution in friction self-piercing riveted aluminum alloy AA7075 T6 joints, Journal of Materials Science & Technology, Volume 82, 2021, Pages 80-95, https://doi.org/10.1016/j.jmst.2020.12.023.

DOI: 10.1016/j.jmst.2020.12.023

Google Scholar

[10] K. Mori, N. Bay, L. Fratini, F. Micari, A.E. Tekkaya, Joining by Plastic Deformation CIRP Annals - Manufacturing Technology, 62 (2013), pp.673-694, https://doi.org/10.1016/j.cirp. 2013.05.004.

DOI: 10.1016/j.cirp.2013.05.004

Google Scholar

[11] Pina Cipriano, G., Ahiya, A., dos Santos, J.F. et al. Single-phase friction riveting: metallic rivet deformation, temperature evolution, and joint mechanical performance. Weld World 64, 47–58 (2020), https://doi.org/10.1007/s40194-019-00803-3.

DOI: 10.1007/s40194-019-00803-3

Google Scholar

[12] Miguel Costas, David Morin, Johan Kolstø Sønstabø, Magnus Langseth, On the effect of pilot holes on the mechanical behaviour of flow-drill screw joints. Experimental tests and mesoscale numerical simulations, Journal of Materials Processing Technology, Volume 294, 2021, 117133, https://doi.org/10.1016/j.jmatprotec.2021.117133.

DOI: 10.1016/j.jmatprotec.2021.117133

Google Scholar

[13] Johan Kolstø Sønstabø, David Morin, Magnus Langseth, Testing and modelling of flow-drill screw connections under quasi-static loadings, Journal of Materials Processing Technology, Volume 255, 2018, Pages 724-738, https://doi.org/10.1016/j.jmatprotec. 2018.01.007.

DOI: 10.1016/j.jmatprotec.2018.01.007

Google Scholar

[14] Meschut G, Janzen V, Olfermann T. Innovative and highly productive joining technologies for multi-material lightweight car body structures. J Mater Eng Perform 2014; 23(5): 1515–23, https://doi.org/10.1007/s11665-014-0962-3.

DOI: 10.1007/s11665-014-0962-3

Google Scholar

[15] Pragana, J. P. M., Silva, C. M. A., Bragança, I. M. F., Alves, L. M., & Martins, P. A. F. (2018). A new joining by forming process to produce lap joints in metal sheets. CIRP Annals, 67(1), 301–304, https://doi.org/10.1016/j.cirp.2018.04.121.

DOI: 10.1016/j.cirp.2018.04.121

Google Scholar

[16] Lossen, Benjamin & Homberg, Werner. (2016). Friction spinning – Twist phenomena and the capability of influencing them. 1769. 070001. 10.1063/1.4963454., 2016 https://doi.org/10.1063/1.4963454.

DOI: 10.1063/1.4963454

Google Scholar

[17] C. Wischer, E. Wiens, W. Homberg. Joining with versatile joining elements formed by friction spinning, Journal of Advanced Joining Processes, Volume 3, 2021, https://doi.org/10.1016/ j.jajp.2021.100060.

DOI: 10.1016/j.jajp.2021.100060

Google Scholar

[18] Wiens E, Wischer C, Homberg W, eds. Development of a Novel Adaptive Joining Technology Employing Friction-Spun Joint Connectors (FSJC).; 2021, https://doi.org/10.25518/esaform21.4682.

DOI: 10.3390/met12050869

Google Scholar

Scientific.Net is a registered brand of Trans Tech Publications Ltd
© 2024 by Trans Tech Publications Ltd. All Rights Reserved