[1]
T. Mabrouki, J.-F. Rigal: A contribution to a qualitative understanding of thermo-mechanical effects during chip formation in hard turning, J. of Mat. Proc. Tech. 176 (2006), pp.214-221.
DOI: 10.1016/j.jmatprotec.2006.03.159
Google Scholar
[2]
L. Filice, F. Micari, S. Rizzuti, D. Umbrello: A critical analysis of the friction modeling in orthogonal machining, Int. J. of Machine Tools & Manufacture 47 (2007), pp.709-714.
DOI: 10.1016/j.ijmachtools.2006.05.007
Google Scholar
[3]
P. Arrazola, D. Ugante, X. Dominguez: A new approach for the friction identification during machining through the use of finite element modeling, International Journal of Machine Tools & Manufacture 48 (2008), pp.173-183.
DOI: 10.1016/j.ijmachtools.2007.08.022
Google Scholar
[4]
G. Vieregge: Zerspanung der Eisenwerkstoffe, Verlag Stahleisen M.B.H./ Düsseldorf (1970).
Google Scholar
[5]
I. Lazoglu, Y. Altintas: Prediction of tool and chip temperature in continuous and interrupted machining, Int. Journal of Machine Tools & Manufacture 42 (2002), pp.1011-1022.
DOI: 10.1016/s0890-6955(02)00039-1
Google Scholar
[6]
R. Pabst: Mathematische Modellierung der Wärmestromdichte zur Simulation des thermischen Bauteilverhaltens bei der Trockenbearbeitung, Dissertation, Universität Karlsruhe (TH) (2008).
Google Scholar
[7]
H.-J. Bargel, G. Schulze: Werkstoffkunde, Springer-Verlag Berlin Heidelberg, ISBN 3-540-26107-0 (2005).
Google Scholar
[8]
G.V. Kurdjomov, A.G. Khachaturyan: Nature of axial ratio anomalies of the martensite lattice and mechanism of diffusion less g à a transformation, Acta Metallurgica. 23 (1975), pp.1077-1088.
DOI: 10.1016/0001-6160(75)90112-1
Google Scholar
[9]
Y.K. Chou, C.J. Evans: White layers and thermal modeling of hard turned surfaces, Int. Journal of Machine Tools and Manufacture, 39/12 (1999), pp.1863-1881.
DOI: 10.1016/s0890-6955(99)00036-x
Google Scholar
[10]
J. Barry, G. Byrne: TEM study on the surface white layer in two turned hardened steels, Materials Science and Engineering A, 325, Issues 1-2 (2002), pp.356-364.
DOI: 10.1016/s0921-5093(01)01447-2
Google Scholar
[11]
D. Umbrello, A.D. Jayal, S. Caruso, O.W. Dillon, I.S. Jawahir: Modeling of white and dark layer formation in hard machining of AISI 52100 bearing steel, Machining Sc. and Tech., 14/1 (2010), pp.128-147.
DOI: 10.1080/10910340903586525
Google Scholar
[12]
K.O. Lee, J.M. Kim, M.H. Chin, S.S. Kang: A study on the mechanical properties for developing a computer simulation model for heat treatment process, Journal of Materials Processing Technology, 182/ 1-3 (2007), pp.65-72.
DOI: 10.1016/j.jmatprotec.2006.07.011
Google Scholar
[13]
T. Miokovic, V. Schulze, O. Vöhringer, D. Löhe: Influence of cyclic temperature changes on the microstructure of AISI 4140 after laser surface hardening, Acta Mat. 55/2 (2007), pp.589-599.
DOI: 10.1016/j.actamat.2006.08.052
Google Scholar
[14]
T. Miokovic: Analyse des Umwandlungsverhaltens bei ein- und mehrfacher Kurzzeithärtung bzw. Laserstrahlhärtung des Stahls 42CrMo4, Dissertation, Universität Karlsruhe (TH) (2005).
Google Scholar
[15]
P.T. Rajeev, L. Jin, T.N. Farris, S. Chandrasekar: Modeling of quenching and tempering induced phase transformations in steels, J. of ASTM Int. 6 (5) (2009).
DOI: 10.1520/jai102095
Google Scholar
[16]
S. Serajzadeh, H. Mirbagheri, A. Karimi Taheri: Modelling the temperature distribution and microstructural changes during hot rod rolling of a low carbon steel, Journal of Materials Processing Technology, Volumes 125-126 (2002), pp.89-96.
DOI: 10.1016/s0924-0136(02)00322-9
Google Scholar
[17]
J. Sölter: Ursachen und Wirkmechanismen der Entstehung von Verzug infolge spanender Bearbeitung, Dissertation, Universität Bremen (2009).
Google Scholar
[18]
J.-D. Oh: Modellierung und Simulation des mechanischen und thermischen Beanspruchungsverhaltens metallischer Werkstoffe bei der Spanbildung, Dissertation, Technische Universität Kaiserlautern (2004).
Google Scholar
[19]
F. Biesinger: Experimentelle und numerische Untersuchung zur Randschichtausbildung und Spanbildung beim Hochgeschwindigkeitsfräsen von Ck45, Dissertation, Universität Karlsruhe (TH) (2005).
Google Scholar
[20]
V. Schulze, H. Autenrieth, M. Deuchert, H. Weule: Investigation of surface near residual stress states after micro-cutting by finite element simulation, CIRP Annals - Manufacturing Technology, Volume 59, Issue 1 (2010), pp.117-120.
DOI: 10.1016/j.cirp.2010.03.064
Google Scholar
[21]
A. Ramesh, S.N. Melkote: Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel, International Journal of Machine Tools and Manufacture, Vol. 48, Issues 3-4 (2008), pp.402-414.
DOI: 10.1016/j.ijmachtools.2007.09.007
Google Scholar
[22]
J. Shi, R.C. Liu: On predicting chip morphology and phase transformation in hard machining, Int. Journal of Advanced Manufacturing Technology, 27 , 7-8 (2005), pp.645-654.
DOI: 10.1007/s00170-004-2242-0
Google Scholar
[23]
M.H. Miguelez, R. Zaera, A. Molinari, A. Munoz-Sanchez: The influence of cutting speed in the residual stresses induced by HSM in AISI 316L steel, CIRP Conference on Modeling of Machining Operations, 12 (2009), pp.631-637.
Google Scholar
[24]
B. Müller: Thermische Analyse des Zerspanens metallischer Werkstoffe bei hohen Schnittgeschwindigkeiten, Dissertation, Technische Universität Kaiserslautern (2004).
Google Scholar
[25]
J. Söhner: Beitrag zur Simulation zerspanungstechnologischer Vorgänge mit Hilfe der Finite-Element-Methode, Dissertation , Universität Karlsruhe (TH) (2003).
Google Scholar
[26]
T. Miokovic, V. Schulze, O. Vöhringer, D. Löhe: Prediction of phase transformations during laser surface hardening of AISI 4140 including the effects of inhomogeneous austenite formation, Mat. Sc. and Engineering A 435-436 (2006), pp.547-555
DOI: 10.1016/j.msea.2006.07.037
Google Scholar
