[1]
Tran, P., T.D. Ngo, and P. Mendis, Bio-inspired composite structures subjected to underwater impulsive loading. Computational Materials Science, 2014. 82: pp.134-139.
DOI: 10.1016/j.commatsci.2013.09.033
Google Scholar
[2]
Wei, X., et al., Three-dimensional numerical modeling of composite panels subjected to underwater blast. Journal of the Mechanics and Physics of Solids, 2013. 61(6): pp.1319-1336.
DOI: 10.1016/j.jmps.2013.02.007
Google Scholar
[3]
Latourte, F., et al., Design and identification of high performance steel alloys for structures subjected to underwater impulsive loading. International Journal of Solids and Structures, 2012. 49(13): pp.1573-1587.
DOI: 10.1016/j.ijsolstr.2012.03.014
Google Scholar
[4]
Yang, E., et al., Impact Resistance and Failure Analysis of Plain Woven Curtains. International Journal of Protective Structures, 2015. 6(1): pp.113-136.
DOI: 10.1260/2041-4196.6.1.113
Google Scholar
[5]
Tran, P., et al., Effects of architecture on ballistic resistance of textile fabrics: Numerical study. International Journal of Damage Mechanics, 2014. 23(3): pp.359-376.
DOI: 10.1177/1056789513495246
Google Scholar
[6]
Yang, E.C., et al., Impact Resistance and Failure Analysis of Plain Woven Curtains. International Journal of Protective Structures, 2015. 6(1): p.113.
Google Scholar
[7]
Ghazlan, A., T.D. Ngo, and P. Tran, Influence of interfacial geometry on the energy absorption capacity and load sharing mechanisms of nacreous composite shells. Composite Structures, 2015. 132(0): pp.299-309.
DOI: 10.1016/j.compstruct.2015.05.045
Google Scholar
[8]
Nguyen, Q.T., et al., Influences of clay and manufacturing on fire resistance of organoclay/thermoset nanocomposites. Composites Part A: Applied Science and Manufacturing, 2015. 74(0): pp.26-37.
DOI: 10.1016/j.compositesa.2015.03.014
Google Scholar
[9]
Quan, T.Q., et al., Nonlinear dynamic analysis and vibration of shear deformable eccentrically stiffened S-FGM cylindrical panels with metal–ceramic–metal layers resting on elastic foundations. Composite Structures, 2015. 126: pp.16-33.
DOI: 10.1016/j.compstruct.2015.02.056
Google Scholar
[10]
Imbalzano, G., et al., A numerical study of auxetic composite panels under blast loadings. Composite Structures, 2016. 135: pp.339-352.
DOI: 10.1016/j.compstruct.2015.09.038
Google Scholar
[11]
Imbalzano, G., et al., Three-dimensional modelling of auxetic sandwich panels for localised impact resistance. Journal of Sandwich Structures and Materials, (2015).
DOI: 10.1177/1099636215618539
Google Scholar
[12]
Tran, P., T. Ngo, and P. Mendis, Underwater Impulsive Loading-Induced Dynamic Failures of Monolithic Composite Panel. Applied Mechanics and Materials, 2014. 553: pp.539-544.
DOI: 10.4028/www.scientific.net/amm.553.539
Google Scholar
[13]
Nguyen, Q.T., et al., Composite Materials for Next Generation Building Façade Systems. Civil Engineering and Architecture, 2013. 1(3): pp.88-95.
DOI: 10.13189/cea.2013.010305
Google Scholar
[14]
Duc, N.D., et al., Mechanical and thermal stability of eccentrically stiffened functionally graded conical shell panels resting on elastic foundations and in thermal environment. Composite Structures, 2015. 132: pp.597-609.
DOI: 10.1016/j.compstruct.2015.05.072
Google Scholar
[15]
Ngo, T.D., et al., Effect of Nanoclay on Thermomechanical Properties of Epoxy/Glass Fibre Composites. Arabian Journal for Science and Engineering, (2015).
Google Scholar
[16]
Lakes, R., Foam Structures with a Negative Poisson's Ratio. Science, 1987. 235(4792): pp.1038-40.
DOI: 10.1126/science.235.4792.1038
Google Scholar
[17]
Xue, Z. and J.W. Hutchinson, A comparative study of impulse-resistant metal sandwich plates. International Journal of Impact Engineering, 2004. 30(10): pp.1283-1305.
DOI: 10.1016/j.ijimpeng.2003.08.007
Google Scholar
[18]
Lochner, R.H. and J.E. Matar, Design for quality: an introduction to the best of Taguchi and western methods of statistical experimental design. New York, (1990).
Google Scholar
[19]
Nguyen, Q.T., et al., Experimental and computational investigations on fire resistance of GFRP composite for building façade. Composites Part B: Engineering, 2014. 62: pp.218-229.
DOI: 10.1016/j.compositesb.2014.02.010
Google Scholar
